GreyBloke
-
Posts
26 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Events
Exhibition Layout Details
Store
Everything posted by GreyBloke
-
Thank you for your suggestions I have been in touch with the manufacturer via email He thinks that there may be an issue with the unit itself and has requested it's return for testing.
-
yes it does the crossing has been removed for fear it was causing an issue. I find your comments insulting Yes the drawing is as per the layout as is See photos. Your suggestion are moving the isolated section would not follow the fitting instructions attached elsewhere in this topic.
-
yes it does the crossing has been removed for fear it was causing an issue.
-
as I did not post that photo on this topic. As I have said this is an issue with the module. Attach is the last photo of the section as it is at the moment
-
as I did not post that photo on this topic. As I have said this is an issue with the module. Attach is the last photo of the section as it is at the moment
-
Fitting instructions 81EF1A.pdf
-
Hope this helps Hope this helps
-
Hope this helps explain
-
Thanks for that Iain, please find attached my best effort of a plan. I hope this helps
-
but this isn't the same issue small locos pass through without issue larger ones won't.
-
its the same section of track yes. Its almost identical to to example given in the fitting instructions for the Rev1. The highlights show the isolated fishplates
-
-
-
Ive wired it using 5amp 2.5mm automotive cable
-
-
1. The loco stops when it exits the isolated section2. The unit is fitted with LEDs to show its status, Red led lit showing it has tripped out. 3. The problem only occurs with 4-?-? Locos 0-6-0 locos are fine
-
the isolated section is near 1m long, the Hornby S15 (without rolling stock) enters and travels the whole length of the section but then stops the autoreverser trips out.
-
Hi, Has anyone used Block Signalings Rev1 autoreverse module. I have one connected to a wye junction on my layout. I can pass 0-6-0 locks over the reverser section no problem but anything with 4 wheel bogies on the front causes a short. Has anyone else had issue with auto reversers ??? I have run out of ideas on how to sort it.
-
Thanks for your reply. I'll have to try and draw the plan out no room for photographers.basicly theres a loop off the two legs the points lead to several sidings.
-
Hi, As a fresh convert to dcc I'm after a little help regarding reverse polarity. On my layout which is ever evolving I have a triangle which is where I get reverse polarity I'm aware I have to fit isolating fishplates and a reverse polarity module but I'm unsure where I need to fit the isolators. Any advice would be gratefully received. I've attached a dodgy picture of the area in question Many thanks.
-
Really enjoyed this article could we have the next installment on CV programming please.
-
That worked a treat thanks Paul
-
Thank you I'm hoping to get some free time Saturday to try this out.
-
Thanks Ian I'm sure there will be many more questions to come.
-
Thanks Paul I'm hoping to get some free time Saturday so I'm looking forward to trying out you advice.
