-
Posts
2,697 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Events
Exhibition Layout Details
Store
Posts posted by mozzer models
-
-
I have got some more work done on the Kirk coaches But No photos
also this week i have got 2 coaches finished
The 1st a
4mm Metropolitan Rly Jubliee Stock all 3rd No307 built from the Bill Bedford Etches & 247 development a
met all 3rd by Mozzer models, on Flickr
The 2nd is a
4mm GWR Dining Car Dia H22 a one off coach No 9556 built from the Blacksmith Models kit
4mm GWR Dining Car Dia H22 a by Mozzer models, on Flickr
4mm GWR Dining Car Dia H22 b by Mozzer models, on Flickr
- 1
-
had these in the garden last tuesday there were 20 plus of them sat in the trees
-
Brian,
How are the grey vans? Why not post a photo.....
Tim
Hi Tim the build of the 1st wagon is here
& here
the 2nd wagon has had all the brass parts cut for the scratch but chassie & i will post photos of it in the blog once i start to solder it all togetter that will be done once i have worked out a jig to hold it square
- 1
-
found this film of BERRY BROW in 1965 there some shots of the station at the begining
the film is on the Yorkshire Film Archive
http://www.yfaonline.com/assetDetails.cfm?film=2490&keyword=
plus this old footage of trains around Huddersfield & Holmfirth
old black & white around 1899
- 1
-
not been feeling well enough to do any modiling for a bit but i have today got the iron switched on & i have built up a GWR 6 wheel bogie from a old mallard models kit the modle is for a GWR Dining car lot 1219
-
Andy
how are the Model rail readers nowing about the vote as i can not see anything in the latest issue
& how can the voting be in No164 if the votes are still been taken till 3rd Dec when No 164 is out on the 1st
The Challenge is open until 1st October 2011 at which point a list of completed entries submitted by that date will be published on 3rd November and voting will run until 3rd December and voted for online by RMweb and Model Rail readers based on the following criteria:
• Visual impact
• Prototypical interest
• Originality
Results will be published in Model Rail 164 and on RMweb. A progress report will feature in Model Rail prior to the closing date highlighting entries.
-
Got some more done to the Quadart set
Its now in Maroon & i have built up the rest of the bogies
once the maroon has had a day or so to dry i will mask of & paint the underframes & ends black
001 by Mozzer models, on Flickr
002 by Mozzer models, on Flickr
- 2
-
got some more done to the Quad art set the bodys are on the underframes & ready for painting & i have built up 2 of the 5 Gresley 8foot bogies which have been put under the brake 3rd
002 by Mozzer models, on Flickr
003 by Mozzer models, on Flickr
004 by Mozzer models, on Flickr
005 by Mozzer models, on Flickr
005 by Mozzer models, on Flickr
-
well goth the next 3 underframes built up for the Quad-Art
001 by Mozzer models, on Flickr
off to start building up the bodys
-
'Smine! Keep yer 'ands orf. I've always wanted one but don't have enough confidence in my own abilities to build it to a good standard. I was, therefore, delighted to win Mozzer's voucher in the RMWeb raffle this year and am really looking forward to seeing it.
Ed
i will be working on the Quad-Art again tomorrow
- 1
-
Hi Andy,
when and where does voting begin?
see the 1st post in the topic
-
Sorry my bad memory, but does not detract from a fine bit of modelling
All down to the D&S kit well thought out as to how it go's togetter very nice to work on
-
Mozzer
The bridge is a stunning bit of modelling, especially as its in 2mm. Its as much as I can do to knock up a turnout in N gauge and I left it to the person I built it for to fill and paint it.
Thanks for showing us your workI must re-do one of my flying bananas.
the bridge is 4mm & not 2mm
-
been repaint a GWR railcar but as i removed the old paint it went back to a kit
so it got a rebuild as well
4mm GWR Railcar built from the ambreco kit b by Mozzer models, on Flickr
4mm GWR Railcar built from the ambreco kit a by Mozzer models, on Flickr
-
One of the Jobs this week is a Ian Kirk kit of a Quad set
today i have made a start on the Brake 3rd
001 by Mozzer models, on Flickr
002 by Mozzer models, on Flickr
- 2
-
Well i have now finished 4mm Metropolitan Rly Jubliee Stock brake 3rd No360 built from the Bill Bedford Etches & 247 development
4mm Metropolitan Rly Jubliee Stock brake 3rd No360 built from the Bill Bedford Etches & 247 development a by Mozzer models, on Flickr
4mm Metropolitan Rly Jubliee Stock brake 3rd No360 built from the Bill Bedford Etches & 247 development b by Mozzer models, on Flickr
- 1
-
Ebay
in Ebay Topics
now sellers can not leave bad feed back unless there tick good then wright a bad one it still show as green ebay did this to stop seller getting good feedback when there should have got bad by bulleing the buyer to leave the feed back with the thret off i will give you bad i you leave me bad
-
Related to this I have a coach detail question.
I have seen pictures of TPO coaches with offset corridor connections. I assume this was for security to prevent ingress from other parts of the train. I note that the Bachmann Mk1 TPO coach has these in the central position. Is this correct?
John
pre grouping TPOs had the offset corrider the BR Mk1 TPOs had the center Corrider but if the Mk1 was built to work with pre grouping TPOs then they were built with the offset
-
this week i have been working on a Bill Bedford Met Jubilee brake 3rd
the body & chassie are built up but i still need to fit some vac pipes saying this is a Bill Bedford kit its gone togetter very nicley
005 by Mozzer models, on Flickr
Tomorrow i will fit the vac pipe then once it has been washed & dryed i will make a start painting it
-
i use Flicr but as my email is with BT i get the upgrade to Pro for free
-
well the bridge is now in primmer
001 by Mozzer models, on Flickr
002 by Mozzer models, on Flickr
003 by Mozzer models, on Flickr
now what Next ??
-
Itis now finished apart from painting but i will only be giving it a coat of primmer
here some photos of it before it gets primmed tomorrow
002 by Mozzer models, on Flickr
003 by Mozzer models, on Flickr
004 by Mozzer models, on Flickr
005 by Mozzer models, on Flickr
006 by Mozzer models, on Flickr
007 by Mozzer models, on Flickr
- 3
-
well got on well today
built up the 2 link spans & attached to the landings this is now 15 1/2 inch or 395mm
After tea i am making a jig to hold the legs in place for soldering to the brass work this will also br used to help hold it safe for shipping
I also hope to get the steps ftiied as well legs
001 by Mozzer models, on Flickr
-
Well not done any work untill today as i was getting over a weekend Playing trains at EM North
but i have today built up the 3rd landing & made a start on the bridges i got built one side put then i had to nip ou & that took langer that i wanted
001 by Mozzer models, on Flickr
Mozzer's new work bench 4mm That Welsh Brake Van building A AA/24
in Kitbuilding & Scratchbuilding
Posted
with all that has been going on since just be for X-mas i am now back building
So to day i am working on a 4mm Smallbrock Studio LSWR 10ton brake van(road van)
the brake van is now a rolling chassie & body & all been well i should get the footrails built up today & fitted as well as the buffers & roof
001 by Mozzer models, on Flickr