mozzers O16.5 & On30 workbench plus O-9

[Pufferman]

I have the Bachmann large praire, was going to scratch build something on it but not so good at that, so looking for engines to go on it. Most of my engines are 0-4-0s, so need a small ish locos to join the fleet with more wheels.

[mozzer models]

I have now finished the loco here are photos what do you all think

001 by Mozzer models, on Flickr

002 by Mozzer models, on Flickr

003 by Mozzer models, on Flickr

004 by Mozzer models, on Flickr

005 by Mozzer models, on Flickr

006 by Mozzer models, on Flickr

007 by Mozzer models, on Flickr

008 by Mozzer models, on Flickr

[mozzer models]

still need to finish fitting the DCC sound

 

But heres how the locos is looking

004 by Mozzer models, on Flickr

 

006 by Mozzer models, on Flickr

 

007 by Mozzer models, on Flickr

 

008 by Mozzer models, on Flickr

 

009 by Mozzer models, on Flickr

 

010 by Mozzer models, on Flickr

 

012 by Mozzer models, on Flickr

[mozzer models]

Well its been a long time since posted here

 

Today i have finished the 3 locos they have been fitted with battery powered flashing led on the roof I have put the switch behind the rear light fitting so you just have to slit something in to the fitting & push the switch

002 by Mozzer models, on Flickr

 

003 by Mozzer models, on Flickr

[mozzer models]

Today i have finished of building to Chivers O-16.5 wagon kit

1st a RC7893 steel open

& 2nd a RC7830 brake van & also Dean asked me to paint his van in to a brown livery

002 by Mozzer models, on Flickr

003 by Mozzer models, on Flickr

[mozzer models]

i have been building 2 Backwoods Miniatues O-9 locos

 

 

The 1st is the one with the engine on show & this make very little room for the DCC chip but there is room for a Digitrax DZ126

 

 

heres the chip fitted to the Kato 11-103 chassis

001 by Mozzer models, on Flickr

 

& here you can see how little room this is

002 by Mozzer models, on Flickr

 

But the chip sits were the Sump of the engine casting should go

003 by Mozzer models, on Flickr

 

so i have removed the sump

004 by Mozzer models, on Flickr

005 by Mozzer models, on Flickr

 

Now the engine sits better

006 by Mozzer models, on Flickr

 

with the engine i have replaced the hoze to the radiater with thick brass wire & also driled a 0.7mm hole though the bulkhead all the way to the engine so thw i can pin this in plae once painted

Still need to add some more detail like the fan, exhaust & airfilter but heres how thinks are at Lunch time

 

by the way on my screan in the photos the loco is over twice the size of the model

 

007 by Mozzer models, on Flickr

 

008 by Mozzer models, on Flickr

[mozzer models]

I Have also built up a backwoods Gas-Mechanical

 

 

011 by Mozzer models, on Flickr

 

012 by Mozzer models, on Flickr

the loco with the engine on show is now in Ford laurel green & the one with the bonit is now in Rover damask red

Here we are the 2 locos painted

 

with the Diesel the DDC chip can just be seen under the engine but looks like the engines Sump is painted Red

 

001 by Mozzer models, on Flickr

002 by Mozzer models, on Flickr

003 by Mozzer models, on Flickr

004 by Mozzer models, on Flickr

005 by Mozzer models, on Flickr

006 by Mozzer models, on Flickr

 

 

& heres the Gas Mechanical Boy it looks more Beefer that the green one

007 by Mozzer models, on Flickr

008 by Mozzer models, on Flickr

009 by Mozzer models, on Flickr

011 by Mozzer models, on Flickr