My first post in this series described how I produced a working drawing for a model of GWR No.184. Now, it's time to consider the tender and, for this, information is less readily available. Wet and windy weather has kept me indoors, so that progress has been rather quicker than I had anticipated.
The various photographs of No.184 show it partnered with a variety of different tenders, so I decided to try to model the tender shown together with its 1893 re-build. I have not found a br
After reading some recent posts about horse drawn wagons and the like, I started to wonder if it would be possible to 3D-print my own horses.
A look at the 'Cults' website yielded a 3D-printable horse by David Mussaffi, described as ‘FDM printer ready’, so I thought that this would be a good place to start. I looked at the file after loading it into my ‘Cura’ slicing software and found that the model was cleverly split into three parts, such that there were flat surfaces to lie on
Background
Several years ago – 2006 in fact – I was driving away from a visit to Blaenau Ffestiniog slate quarries and noticed that the last train of the day was due to arrive at the railway station.
It turned out to be quite a long wait, as the train on the Festiniog Railway was in trouble and eventually arrived with a broken flexible steam pipe to one of the power bogies. With a sense of ‘make do and mend’, the trailing end of the pipe was lashed up and the train then m
I had hoped to have moved a lot further with No.184 but, unfortunately, have made a very elementary mistake! I knew that one of the problems with 00-gauge is that it is, in fact, a narrow gauge, with implications for fitting the boiler, etc., between the wheels. I think this had lulled me into a false sense of security with the outer dimensions, but these do become rather important in the case of an outside-framed locomotive with outside cranks! I 'got away with it' on my earlier scratch-built '
In my very first post in this blog, I mentioned converting an old K's 14xx to a fair representation of a 517 class. Since the 517 was a very variable class, it's impossible to select a 'typical' version - they vary from the earliest tiny saddle tanks, with a short wheelbase, to the final re-builds, which were very similar to Collett's 14xx series. Nevertheless, there were significant differences between even the latest of these engines and the 14xx - most obviously in the cab but also the 14xx h
In an earlier post in my blog, I described construction of a GWR Tilt Wagon, based on a photograph in a Forum Post by Wagonman. I also reported that, when Sir John saw it in North Leigh station, he commented that it might just hold all his daughter's hat boxes. So, I now call it my 'Hat Box'.
At the time of my earlier entry, I had designed and built the basic body and started adding some of the detail. Completing the rest has been a very fiddly task, using lots of rivet strip (from M
For the last couple of weeks, I have been dealing with various track issues and tidying up bits of scenery, none of which makes for very interesting blog writing! I noticed, however, in Mikkel's workshop thread some comments about Witney blanket trains, which reminded me of a photo that I had seen of a GWR 'Queen' class 2-2-2 heading such a train. This seems a rather unlikely combination but I eventually tracked the photo down to Colin Maggs' book "The Branch Lines of Oxfordshire" (Amberley, 201
One of the things to remember when 'turning back the clock' is the former widespread use of horses, which continued up until WW2 and lingered even into the 1950s. I felt I needed to learn a bit more about how they were used, so that I could replace some of my more modern traffic with appropriate period vehicles. I found the book 'Great Western Horse Power' by Janet Russell, which proved to be a mine of information but seemed to concentrate on large depots and cities, whereas I was interested to
Finding things to do in lock-down is something of an ‘art-form’. A friend recently introduced me to some software called 'Pixbim ColorSurprise AI'. He showed me some remarkable results, where it had automatically coloured some of his old monochrome photos.
So I thought I’d try it out on some of my collection of 19th-century railway photos. There’s a ‘free trial’ version but, as is so often the case, it is hobbled by printing multiple watermarks all over any saved results. To show t
Five years ago, I came across JCL's splendid thread about the Silhouette cutters at an appropriate time for dropping heavy hints before Christmas. This resulted in my acquiring a 'Silhouette Portrait' machine and loads of ideas for making my own coaches and buildings.
It proved very fortuitous since, only a few months before, I had decided to return to railway modelling by re-furbishing my old small layout and turning back the clock to the 19th century period. The cutter was a great
Some time has elapsed since I first decided to paint the wagons red on my GWR 'North Leigh' railway but I still look out for any further information that may shed further light on when and where this colour was used.
My 1st edition copy of 'Great Western Way'(GWW) stated: "it would seem to be about the end of the 1870s that wagons and vans first sported a standard pattern of painted lettering. It was about this time, too, that the change from red to grey as a body colour
I am very grateful for the appreciative comments on my recent posts and very pleased to know that some of my earlier posts are still considered to be a useful resource. I confess that I am still finding it hard to adapt to the ‘new’ (well, fairly new) RMWeb format and don’t seem to dip into here as much as I used to do – it’s an age thing I suppose.
Progress with the 3D printer continues to be slow – two small grand-children do take up a fair bit of my energy resources and I have ma
With the holiday period now upon us, many of North Leigh’s locomotives are now ‘on shed’. In the following photo can be seen my first ‘scratch build’ - a GWR ‘Queen’ class, with a ‘Stella’ 2-4-0 next in line. Disappearing out of view, the back of ‘Lord of the Isles’ can just be glimpsed, while on the front track is a Dean Goods, together with an early PBV. (The 'back scene' is by Photoshop)
Locomotives ‘On Shed’
Looking back into Broad Gauge days, I remember a comme
I know that this is a model railways website but I also have no doubt that many people visit because they enjoy looking at the photos of other people's layouts. Thus, it is inevitable that photography plays an important part in communicating what we are doing. There are lots of excellent photos on this website but I thought that it might be of some interest to show some of the techniques I use when photographing my small layout.
The word 'photography' is derived from two Greek words
I've been reading the thread started recently by Robin2 on "Why have moving trains on layouts?" - ( http://www.rmweb.co.uk/community/index.php?/topic/78169-why-have-moving-trains-on-layouts/ )
There've been lots of interesting and thoughtful replies and it has made me think. On the one hand, I couldn't build an engine without wanting to make it work satisfactorily and, on the other, I don't run trains very much but do enjoy setting up various static scenes for photography. I do find
Introduction
The last few months have been busy ones for my household, with little time to think about model-making. The spells of hot weather have not been conducive to spending time in my workroom either and, on top of all those things, I have had another failure of the feeder mechanism in my 'Geeetech' printer.
Broken Filament Feeder
I think the root cause of the problem was a faulty temperature sensor in the print head, which caused the feed tube to j
Having built a Victorian train, I now have to think about providing some passengers. Since I know far less about 19th-century styles of dress than I did about 19th-century railways, when I started, I decided it was time for some reading.
As I pointed out in a previous post, I have found the Internet Archive ( http://archive.org/ ) to be a very useful resource. Old 'out of copyright' books can either be read on-line or downloaded in formats such as PDF. In my current search, I found '
Last Saturday I visited my local model railway exhibition - AbRail 2015. I was looking for ideas on scenery and there was a good number of interesting layouts. Several featured canals and water and, of these, I particularly enjoyed the 'Aldford Brewery' (Wimbledon MRC) and the canal-side inn at 'Mulldale' (Letchworth MRC).
I also thought that there were some impressive trees alongside 'The Abingdon Branch'. Initially I thought 'Highclere' (Julia Adams) looked rat
At the end of my last post, I felt that I had solved all the main problems associated with building my Armstrong Goods engine, although a lot of detailing remains to be done.
To complete the model, I needed to add a tender, which I intended to contain the drive unit. I have made several powered tenders based on 'Hornby' ring-field mechanisms, around which I used components from either plastic or white metal kits. I have used two different 'Hornby' mechanisms: type X9105 with 7' 6" +
There is one problem that has been lurking in the background throughout my design of this outside-framed locomotive – how to fit the wheels? The wheels need to be pressed onto their axles and set to gauge, before fitting them to the locomotive.
I had already decided that this engine will be tender driven, so I do not have to make provision for a gear train. After considering various options, I decided to adopt the method used in the tender-drive ‘Mainline’ Dean Goods model. Since I h
At the end of the previous part, I had printed the main body components but was experiencing difficulty in printing small boiler fittings. The difficulty was that, on their own, these had no flat surface to lay on the printer bed. My next idea was to ‘slice’ these components just above the curved flanges that fit around the boiler and print the upper and lower parts separately, so that they could subsequently be glued together across their flat faces.
To my surprise, the tiny compone
Never become complacent! After a long spell of trouble-free printing, I started to encounter problems a couple of weeks ago. First off, the old problem of lack of adhesion to the printer bed returned. I had become lazy about replacing the blue masking tape and the surface had become worn. After replacement and re-levelling, all seemed well again ... until the heat wave struck. The next problem was uneven printing. It was too hot for me in my work room, so I left it alone while I got on with des
In my previous post, I showed the brass components that will form the ‘hard’ skeleton of my planned model of an Armstrong Standard Goods engine. The fireman’s side of No.661 is shown below to complement my previous illustrations of the driver’s side of No.31:
Armstrong Standard Goods No.661
Now, I shall describe my procedures for producing 3D-printed parts to form the ‘flesh’ of the model, which will carry the details of the outside frames, footplate, boiler cladding, smok
It’s some time since I’ve scratch-built a standard gauge locomotive, having been spending my time recently on Broad Gauge models. I learned several lessons, however, during the construction of my previous 00-gauge models, the most important of which was to remember that 00-gauge is actually a narrow gauge – closer to 4’ than 4’ 8 ½”, when scaled.
My first scratch-build, described in 'Railway Modeller', July 2014, was of a 2-2-2 ‘Queen’ class engine, which was a simple choice because
On a number of occasions over the years, I have posted comments indicating my dis-satisfaction with the ‘Mainline’ Dean Goods that is currently serving on my North Leigh layout. It’s really too late for my period, with Belpaire firebox and other details that place it long after the turn of the century.
My model Dean Goods at North Leigh
I have recently been following Mikkel’s conversion of a ‘Belpaire’ Dean Goods into an earlier ‘round-top’ version and have thought o
