Platform surface part 2
Since my last blog entry I've been beavering away fitting the Plaster of Paris paving sections onto the platform substructure. The fact that the platform is set on a gradual curve meant that the front edge of each section needed to be sanded carefully so that it would fit neatly against the edging stones. Once sanded the individual sections were fixed in position using PVA wood working glue which allowed for a bit of fine tuning of the sections position before the glue set.
Plaster tiles being fitted into position
Although the area immediately around the station building was laid in diamond embossed tiles, I wanted the rest of the platform to be covered in fine compacted ash. 2mm thick card was used to bring the surface level with the platform edging stones and the paving tiles. Once again PVA was used to fix the card in position, with drawing pins used to hold everything in place while the glue set.
2mm thick card pinned in position
Height of card in relation to the plaster embossed tiles
The platform surface was then painted with grey emulsion to reduce the stark white colour and provide a base for the ash surface. I reasoned that probably the best way of representing an ash platform surface was to use real ash and so the bbq was lit :-) Once the embers had died down and the excellent food digested, the ash was sieved to remove any large pieces and leave just a fine powder. Mrs Wenlock has yet to discover exactly what her best flour sieve was used for and as I'm fairly convinced she doesn't trouble herself with reading my RMweb ramblings, she's likely to remain none the wiser!
The edging stones and embossed tiles were then masked out using "frog tape" prior to spraying the entire platform surface with clear matt acrylic varnish. While this was still wet and tacky the sieved ash was sprinkled across the surface and allowed to dry.
Once the varnish had fully set any excess ash was vacuumed up and the masking tape was removed. At this stage I couldn't resist putting the buildings back in position and taking a picture!
I then made a start on colouring the embossed tiles. I mixed a dark blue/grey using enamel paint and worked this into the plaster surface using an old brush. The porous plaster surface meant that the paint dried with a nice matt appearance and this was then left to harden off for 24 hours. Once the enamel was fully dry I mixed a dilute wash of creamy grey acrylic paint and worked this over the surface of the tiles. The thinned paint flowed nicely into the cracks between the tiles and highlighted the embossed pattern on the tiles. Once dry the tiles had a rather nice dusty appearance that I'm quite pleased with and to my eye looks quite appropriate for an Edwardian summers day! :-)
I'll finish off with a view under the canopy, but that's the progress to date
Until next time!
Best wishes
Dave
- 14
23 Comments
Recommended Comments
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now