Canterbury & Whitstable Railway, Tayleur 0-6-0
It's been a very long time since my last post (which I think was a 4mm scale chair!) but I've nearly completed my latest build: Canterbury & Whitstable Railway, Taylor 0-6-0 goods loco, no.121, c1847.
The bulk of it was constructed whilst convalescing with a broken left metatarsal. What a tragedy to be signed off work and have to sit there day after day with my foot up, drinking tea and model making, life can be so cruel!
A friend offered some Portescap motor/gearboxes in exchange for kits so one of these formed the basis for this engine. The gearbox had to be dismantled and reversed so the driving axle sat under the motor and the wheels were some old Romford ones from the scrap box.
One of the biggest challenges was the haycock firebox with it's brass beading around the corners. The box itself was build up from two strips of scribed 10thou brass bent into an 'n', cut and soldered together, then the brass corners cut from 5thou, bent and beaten into submission around the curves, a horrible job and much learned in the process but it doesn't look too bad. It hasn't put me off doing another one anyway.
The tender was rest was gradually scratch built using good old fashioned measure, bend and cut techniques, as was the rest of the loco, a refreshingly 3D print free zone! It still requires some water feed pipes under the footplate and there is an annoying little short every time it goes left which I must sort out. Of course some crew will be required before it moves 'off shed' but they can wait.
The photographs leave a bit to be desired, I find the low sun at this time of year a bit tricky, our house faces due south and not casting a shadow over the photo at midday requires some degree of contortion. Hopefully they will do for now, next up is an 1845 Bodmer Single but as usual it will take me ages!
Thanks for looking and please feel free to ask if you need to know more.
- 13
- 26
21 Comments
Recommended Comments
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now