Hi Have just bought this system to try out.
I've never really been a fan of using PC's or touch screens to run a Loco much preferring to use a rotary control knob.
Touch screens are great for operating points though!
This is was all packaged up very nicely inside a cardboard box.
Conections to go to the track and the 2amp 15v input to power it all.
Inside the box!
This is just the interface between the APP and the layout.
This is the WiFi version which allows more than one Andriod device to be connected, the Bluetooth version only allows one Andriod device.
The app is Locomotive Wifi DCC 3 which can be found in the play store.
I have been trying the basics out and it all works rather well!
You set upto 50 locos in the roster and then call them up into the throttle screen where you can switch between 4 locos. You can name each loco and each function for that loco, also select which of the 28 functions are latching or momentary, great if you have more than one horn and don't wish to keep turning it on/off.
Turnouts also work with no issues and again can be named to suit your layout.
The CV read/write operates with no issues on my mixed bag of decoders so all good.
For the price I think its a very good solution.
I'm in no way connected to this, just thought I'd post a quick overview.
Will post a full review once I've had more time playing, but so far so good!
There is no separate progamming track but I'm used to that and have a DPDT switch set up to flick between main track and program track.
Link below to ebay for the different modules or even a bare PCB if you want to build one yourself!
https://www.ebay.co.uk/sch/cuthbertw/m.html?item=233936143653&rt=nc&_trksid=p2047675.l2562
I have been in contact with the designer and Bill has come back to me very quickly taking on board some of my comments to improve the app.
Any questions just ask and I will do my best to answer.
Cheers
Ian