RMweb Gold Alister_G Posted November 19, 2020 RMweb Gold Share Posted November 19, 2020 The rocks look very effective, and the colouring is spot on. Nice work. Al. 1 Link to post Share on other sites More sharing options...
That Model Railway Guy Posted November 19, 2020 Author Share Posted November 19, 2020 55 minutes ago, Alister_G said: The rocks look very effective, and the colouring is spot on. Nice work. Al. Thank you. They've continued drying this evening and are now a bit paler than they were in the pictures... presumably as the plaster absorbs more of the paint. I'll plough on with the static grass tomorrow as planned but I can always touch up the rocks with a tiny dabs of watered down black/grey here and there if it really continues to bother me. 1 Link to post Share on other sites More sharing options...
That Model Railway Guy Posted November 20, 2020 Author Share Posted November 20, 2020 Lots more progress today! This morning I had a go at the road surface across the bridge - it's not come out amazing but it'll do for now. Funnily enough it actually looks better in the photos than it does in reality (usually it's the other way round!) but I imagine I'll end up going over it in the future to get something slightly smoother. I also added a dirt verge alongside the road and the track too just to blend it into the grass a bit better as that was something I wasn't quite happy with on my first module. There's also a dirt patch where my two buildings stand with a little path leading down from the road - this will be getting a gate in the future. Then it was on to the static grass! I was looking forward to this as it always seems to transform the layout and I wasn't disappointed. Several shades have gone down and it all dried fairly quickly so I was even able to attach some basic bushes and foliage around the bridge before I called it a day. All said and done, here's the result of today's adventures... There's still lots more to be done (track weathering, fencing/walling, grass tufts, more bushes/trees/wildflowers, etc) but the big jobs are all complete and it's more about adding the details now to make it feel real. To finish off I couldn't resist connecting the two modules together and taking a nice wide shot - I think I've definitely captured the feeling I was aiming for of the railway running through the open landscape... just need to get a train on it now! 9 1 2 1 Link to post Share on other sites More sharing options...
That Model Railway Guy Posted November 21, 2020 Author Share Posted November 21, 2020 Just in case anyone's wondering - in the pictures on my previous post the modules were aligned but not bolted together, which is why the baseboard join looks very noticeable. It's much better when properly connected but I also want to do some work on the static grass at the edges of the modules to hopefully disguise the join even further. Link to post Share on other sites More sharing options...
RMweb Gold Alister_G Posted November 21, 2020 RMweb Gold Share Posted November 21, 2020 It's really looking very good indeed, you've made a cracking job of it. I really like the road surface as well, looks spot on. Al. 1 Link to post Share on other sites More sharing options...
That Model Railway Guy Posted November 21, 2020 Author Share Posted November 21, 2020 Thanks @Alister_G, sadly the road isn't anywhere near as smooth as it looks in the photos. I certainly wouldn't want to ride a bike down it! I might try painting it to see if it makes it less noticeable before I take any drastic action but I'm not too worried considering there's still fencing/walling and bushes to go on either side of it. Link to post Share on other sites More sharing options...
That Model Railway Guy Posted November 22, 2020 Author Share Posted November 22, 2020 (edited) As I've mentioned before I'm also documenting the build of this layout over on my YouTube channel. I tried to film as much as I could while building the scenery up and have edited together a little video of my efforts so far. Here's the link to watch it if anyone prefers that to reading my rambling posts! https://www.youtube.com/watch?v=nlqnN3o_kVo Edited November 22, 2020 by That Model Railway Guy Corrected link. Link to post Share on other sites More sharing options...
Julia Posted November 22, 2020 Share Posted November 22, 2020 On 04/11/2020 at 17:30, That Model Railway Guy said: This might seem like I'm jumping the gun but I'm thinking about trees! Yes, I know it’s sounds a bit premature but because (when not in use) the individual modules will most likely be stored on top of each other in some way. Having trees sticking up would greatly increase the amount of space needed between each module. I realised I need to make the trees removable in some way so that I can fit more modules into a vertical space. I’m using the Woodland Scenics armatures which come with a base that the main trunk clips into. From what I’ve seen most people discard the bases but I’ve embedded mine into the landscape (using a bit of left over modelling compound). Once painted brown to match the rest of the board, it leaves a nice hole that the finished tree can slot into when the module is in use and then be removed for safer storage when the module is put away. As you can imagine I wanted to get this done now before I start putting down the static grass. The eagle eyed among you may also be able to see in the background of the first picture I’ve started work on the ballasting too! Finally I decided to make some trees. I didn’t have to do this now but I’d already opened the Woodland Scenics armature pack to get the bases out so I figured I’d give it a go for a bit of fun. It made deciding the location of the trees a bit easier too. These were my first attempts and I’m pleased with how they’ve come out considering I’ve never made one before. Borrow a trick from the masters of modular layouts, FREMO. What they often do is have modules in pairs, with one upside down over the other, if you line it up right, you have trees on one module in a position so they don't clash with trees from the other module, This means that your total height for 2 modules is equal to the height of 2 modules, plus the height of the tallest tree plus a little bit of wiggle room (say 10mm). For my modules they are 100mm thick, the trees are about 180mm in height, and that means I fit two modules in a 400mm vertical space. A lot easier than making trees removable. J 1 2 Link to post Share on other sites More sharing options...
That Model Railway Guy Posted November 22, 2020 Author Share Posted November 22, 2020 10 minutes ago, Julia said: Borrow a trick from the masters of modular layouts, FREMO. What they often do is have modules in pairs, with one upside down over the other, if you line it up right, you have trees on one module in a position so they don't clash with trees from the other module, This means that your total height for 2 modules is equal to the height of 2 modules, plus the height of the tallest tree plus a little bit of wiggle room (say 10mm). For my modules they are 100mm thick, the trees are about 180mm in height, and that means I fit two modules in a 400mm vertical space. A lot easier than making trees removable. J Ooh interesting idea. I don't think it would work for me with these particular modules as the trees are generally on the higher ground but it's good to know in case it's useful for future modules. In this instance though height is very much at a premium when it comes to storing these and so it's ended up saving me a lot more space by having the trees be completely removable. Link to post Share on other sites More sharing options...
That Model Railway Guy Posted December 15, 2020 Author Share Posted December 15, 2020 Hi Folks, earlier in the thread I sort of explained how I'm connecting the baseboards and aligning all the track and scenery in a way so that it's consistent across every module. That said, if anyone's interested in seeing it action I've made this video of me adding the endplates and dowels to a module and getting it to a stage where my stock can cross the join smoothly. I did this mainly for my audience on YouTube as they wanted more information on how it worked, but thought I'd post it here in case it's of interest as it's relevent to the layout. As much as I'm fumbling my way around building this layout, I'm glad I took the time to really think about how I was going to join the modules, as I knew it would either make or break the layout! Thankfully it seems to have paid off and doing the ground work was worth as so far all my basebaord joins have been nice and smooth. Additionally, some of you may have noticed that this video features a new module which is currently under construction. This is the "bufferstop board" that, when finished, will complete Phase One of the layout and then I'll be able to move onto the station area, which I'm rather excited about. I've been taking pictures along the way so hopefully I'll get round to posting those soon 4 1 Link to post Share on other sites More sharing options...
STATO Posted December 23, 2020 Share Posted December 23, 2020 Really enjoying watching the build progress, making me want to do something similiar. One thought that did occur to me having seen your propose build, would be to make one corner board (lower left of you general plan) a y-piece with a point, presuming you could maintain the smooth curve you have on those pieces. The intention being to allow you to place the buffer module off the point when set-up in full 'loop' mode, as it seems a shame to not use the module if you have built it, and it would make a nice waiting/reversing position in operation. The other benefit of a y-piece is it could be used to make a return loop when combined with the 3 other corners, so you could set up the layout as a long out and back; Fiddle yard - station - reteurnloop. Could be useful setup option at shows etc. 1 Link to post Share on other sites More sharing options...
That Model Railway Guy Posted December 23, 2020 Author Share Posted December 23, 2020 Thanks @STATO, glad you're enjoying it. Ooh, that's a really interesting idea and I'll definitely have to look into that. Unfortunately the room it will usually be setup in isn't long enough to have the buffer module as well as the curves in that configuration but it's definitely worth keeping in mind for all the potential options it opens up if space ever isn't an issue! Thanks for that Link to post Share on other sites More sharing options...
That Model Railway Guy Posted December 24, 2020 Author Share Posted December 24, 2020 Merry Christmas everyone! Here's a quick attempt at a festive shot on one of the scenic parts of the layout 6 Link to post Share on other sites More sharing options...
RMweb Gold Alister_G Posted December 25, 2020 RMweb Gold Share Posted December 25, 2020 Merry Christmas mate, hope you have a good one. Al. 1 Link to post Share on other sites More sharing options...
That Model Railway Guy Posted December 29, 2020 Author Share Posted December 29, 2020 Thank you @Alister_G, I had a great Christmas. Hope you had a good one too and best wishes for the New Year! Link to post Share on other sites More sharing options...
Acklam Posted December 29, 2020 Share Posted December 29, 2020 Great thread, this is something that I am seriously thinking of doing. Are your end plates off the shelf or did you get them specifically made? 1 Link to post Share on other sites More sharing options...
That Model Railway Guy Posted December 29, 2020 Author Share Posted December 29, 2020 2 hours ago, Acklam said: Great thread, this is something that I am seriously thinking of doing. Are your end plates off the shelf or did you get them specifically made? Hi there, the endplates are my own custom design as I wanted something quite specific and I just send the computer file off to a company who do custom laser cutting for them to make. Anytime I need more endplates I just order some more using the same file and they come back identical to every other batch. The endplates are only one part of the puzzle though. You may have already seen it but a few weeks back I posted a video where I went through the whole process of aligning and joining the baseboards/modules, so if you're thinking about doing something similar it might be worth a taking a quick look 1 Link to post Share on other sites More sharing options...
Acklam Posted December 30, 2020 Share Posted December 30, 2020 I have just watched it thanks, I found it very informative. 1 Link to post Share on other sites More sharing options...
That Model Railway Guy Posted December 31, 2020 Author Share Posted December 31, 2020 Thanks @Acklam, glad you found it useful and I hope it helps out with your own plans. So far I've found that it was worth spending the time I did on this area as it's made building the rest of the layout a lot easier in comparison. Link to post Share on other sites More sharing options...
That Model Railway Guy Posted January 9, 2021 Author Share Posted January 9, 2021 Well it's my first post of 2021 so I thought I'd share this photo I took the other day for a bit of fun. I don't yet have a backscene so the landscape has been extended with a little bit of dodgy work in photoshop but I was pleased with how it's turned out (as long as you don't look too closely!) given I was just messing around. 2 3 Link to post Share on other sites More sharing options...
RMweb Gold Alister_G Posted January 9, 2021 RMweb Gold Share Posted January 9, 2021 That's a cracking photo, really atmospheric. Al. 1 Link to post Share on other sites More sharing options...
That Model Railway Guy Posted January 16, 2021 Author Share Posted January 16, 2021 Hello everyone, hope you're all having a good weekend. Just realised I never posted my progress from over Christmas so here's a quick update for you all. Lately I've been working on the bufferstop module which will complete Phase 1 of the build. This isn't really a proper module, it's more of a diorama that just acts as an end stop for the moment. Eventually though it will be used as a headshunt for the station when the layout is setup in an end to end configuration. As a result this is the smallest and perhaps most uninteresting module on the entire layout. Firstly, apologies for the low quality pictures - they're all screenshots taken from the update video. Since I was filming everything as I was going I didn't think to take any photos! The bare baseboard ready to have track laid on it. With the track in position I built up the landscape around it using polystyrene and plaster bandage... ...Which was then painted brown to give the impression of a dirt layer. The track has also been painted and ballasted too. And finally the "finished" module - well at least for the moment. The static grass does make it look a lot more complete though obviously it needs lots of little details adding (as do all the the modules!) but the basics are there. The scenics obviously don't line up around the track very well but I'm not too concerned at the moment considering these two modules are unlikely to even be setup like this in a normal running session. Instead I'll spend my time making the end of the station module blend into this as that's where it will see most use. 5 Link to post Share on other sites More sharing options...
That Model Railway Guy Posted January 16, 2021 Author Share Posted January 16, 2021 And for those of you who like to see the process actually happening, here is the video that the stills were taken from: 3 Link to post Share on other sites More sharing options...
That Model Railway Guy Posted January 29, 2021 Author Share Posted January 29, 2021 An exciting delivery earlier this week has meant I've been able to start work on the two station modules. The baseboards are built and track laying has begun so fingers crossed I'll have some progress to share over the weekend! 3 Link to post Share on other sites More sharing options...
That Model Railway Guy Posted January 31, 2021 Author Share Posted January 31, 2021 Evening all, after a busy few days working on the layout the track is now laid for the two stations modules! Everything except for the inspection pit that is, as I've decided to leave that for another time. I wired these two boards up as I went and for the first time ever I have been able to setup all 7 of the current modules to form an end to end U-shaped layout as seen below. The two new modules looking from the station end towards the sheds. And a reverse shot looking from the shed end towards the station. In the distance you can just see the bufferstop module being used here as the headshunt. And just past the shed is where the scenery abruptly starts! An overview of the current setup, running from fiddle yard to the station terminus and then back out again. This afternoon was spent playing... ahem, I mean testing with various locos and rakes of coaches to get a feel for the layout and to iron out any issues. It does actually feel like a layout now as, while the curved modules look nice, there's not a lot you can do with them on their own aside from run a loco up and down. Hopefully this will inspire me to keep working on the layout but for now... more testing! 5 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now