RMweb Gold Stubby47 Posted April 3, 2012 Author RMweb Gold Share Posted April 3, 2012 The trouble is Peter, I see too many of these little buildings and want to model all of them. But, I'm trying to make harder examples and better models each time, so when I start making actual layouts I have enough skills. Link to post Share on other sites More sharing options...
DonB Posted April 3, 2012 Share Posted April 3, 2012 In those far off days before "proper" computers, punched cards were the norm in accountancy departments, and some dedicated modellers (names escape me) used the punched-out oblong "chads" laid and glued individually to represent brickwork, a real labour of love! I think it would be difficult to find the "chads" now, although I think they still use punched cards in USA elections. (remember the "hanging chads" in the Florida elections 10 years or so ago?) Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted April 3, 2012 Author RMweb Gold Share Posted April 3, 2012 I have bags of chads, we have a machine at work which cuts rectangular holes down the edge of a page, in which to insert a plastic binding strip. the 'bricks' are a little oversize for house bricks, but make excellent paving slabs or breize blocks. Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted April 4, 2012 Author RMweb Gold Share Posted April 4, 2012 I took some more photos of the little shed this morning, (in the rain), to get some better detail shots of the potential problem areas... This is the corner with the bricks... This is the side view with what appears to be a boarded over door, with poster frames added as well. Note the rather flakey paint work... Link to post Share on other sites More sharing options...
cary hill Posted April 4, 2012 Share Posted April 4, 2012 I took some more photos of the little shed this morning, (in the rain), to get some better detail shots of the potential problem areas... Instead of faffing with fotos in the rain I reckon you should have done some 12 inch to the foot remodelling to restore the brickwork to it's apparently slightly neater earlier Google Streetview condition to avoid having "unlucky" 13 points of difficulty with the build. But then again points of difficulty numbers 14 and 15 could be the genteel general sagging of the roof and the corbels at the rear of the building Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted April 5, 2012 Author RMweb Gold Share Posted April 5, 2012 The rear wall is actually heavy, random shaped stone blocks, not a corbel in sight. Apologies for the sunlight... Link to post Share on other sites More sharing options...
RMweb Premium Sidecar Racer Posted April 5, 2012 RMweb Premium Share Posted April 5, 2012 Looks like the easiest bit will the big red post box . Link to post Share on other sites More sharing options...
BlackRat Posted April 5, 2012 Share Posted April 5, 2012 Stu, for the veggie, hows about unwravelled embroidery cotton? A couple of different shades should do it. It unravels to form a very fine thread, useful for 'creepers' etc1 Redroooooffff me anzuum! Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted April 5, 2012 Author RMweb Gold Share Posted April 5, 2012 Stu, for the veggie, hows about unwravelled embroidery cotton? A couple of different shades should do it. It unravels to form a very fine thread, useful for 'creepers' etc I was thinking exactly that... - they know me at the haberdasher's stand in the indoor market, so I shouldn't get too many stange looks when asking for the cotton... Link to post Share on other sites More sharing options...
The Evil Bus Driver Posted April 5, 2012 Share Posted April 5, 2012 Why not try using brick slips? This site has them: http://www.minaco-uk.com/ Link to post Share on other sites More sharing options...
N15class Posted April 5, 2012 Share Posted April 5, 2012 There are some nice quoins in the back wall. Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted April 5, 2012 Author RMweb Gold Share Posted April 5, 2012 There are some nice quoins in the back wall. The back wall won't be seen... I've added the lapboard planking on the front & left side walls, also added the windonw I didn't realise was there until yesterdays' photos were taken. The grey area is added cardboard to give the brickwork more of a pronouced step before the planking above it. Planking is 3mm wide strips of 80msg paper, the window cill is 1.5mm mount board and the window frame is Chubber's favourite Packeto_Flakeo cardboard. Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted April 5, 2012 Author RMweb Gold Share Posted April 5, 2012 Why not try using brick slips? This site has them: http://www.minaco-uk.com/ Alex, Thanks but even at 1:24 they will probably be too big. Given that a house brick is 8½ × 4 × 2½ in, in 4mm scale that would be just under 3mm x 1mm x 0.5mm (ish !) so I'm hoping some lengths of rectangular plastic rod will be suitable. As long as I get a good approximation, I'll be satisfied. Link to post Share on other sites More sharing options...
cary hill Posted April 5, 2012 Share Posted April 5, 2012 There are some nice quoins in the back wall. I was shocked to discover that this "building" is listed in one of the Redruth architectural/heritage building studies as having some merit and apparently dated pre 1908. I suspect it is due to this rear wall,as this at one time possibly butted up the rear wall of Jack Splat's Yard which was there before the Royal Mail monstrosity. Edit grammar Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted April 5, 2012 Author RMweb Gold Share Posted April 5, 2012 I was shocked to discover that this "building" is listed in one of the Redruth architectural/heritage building studies as have some merit and apparently dated pre 1908. I suspect it is due to this rear wall,as this at one time possibly butted up the rear wall of Jack Splat's Yard which was there before the Royal Mail monstrosity. Wow - thanks for the info ! So chances are it won't be demolished (if you notice there are two official notices on the front wall to the left of the door, but I'm not sure what they are for) - I just hope they don't 'fix' it before I've finished my model - cue Bachmann/Hornby turning up and making a resin version !! Link to post Share on other sites More sharing options...
Guest Dave.C Posted April 5, 2012 Share Posted April 5, 2012 I just hope they don't 'fix' it before I've finished my model I very much doubt that any work will take place over a Bank Holiday weekend, you on the other hand could well complete the model Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted April 6, 2012 Author RMweb Gold Share Posted April 6, 2012 More progress this morning - I've glued the walls together and slapped some paint on. Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted April 6, 2012 Author RMweb Gold Share Posted April 6, 2012 ...and now have added the notice board and the start of the brickwork... Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted April 6, 2012 Author RMweb Gold Share Posted April 6, 2012 ...and now the ground level has been attached. This really gives the building a sense of proportion,as it hides the extended walls. Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted April 7, 2012 Author RMweb Gold Share Posted April 7, 2012 Front door added, plus the large piece of chipboard, and the side panel covering what I think was another door has alos been done. Mainly just the notice board on this panel, the window covering on the other side and the roof to do. Link to post Share on other sites More sharing options...
N15class Posted April 7, 2012 Share Posted April 7, 2012 You are getting on really well with this. You had better watch out it looks so derelict I would not be suprised if it fell down before you finish it. Link to post Share on other sites More sharing options...
RMweb Premium Sidecar Racer Posted April 7, 2012 RMweb Premium Share Posted April 7, 2012 I think that that is actually strand board not chipboard Stu , a small difference in the makeup and ability to stand dampness . Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted April 7, 2012 Author RMweb Gold Share Posted April 7, 2012 I think that that is actually strand board not chipboard Stu , a small difference in the makeup and ability to stand dampness . It's actually only cardboard... Link to post Share on other sites More sharing options...
cary hill Posted April 8, 2012 Share Posted April 8, 2012 This model is a superb study in grotty decay. I have to remind myself how small the model actually is. On a slightly tangental point - I was flicking through Barry Norman's "Designing A Layout" yesterday, looking for something else, and stumbled across his plan for layout based on Redruth ..... and the plan has a funny little "shed-sized" building opposite the station just where it should be. Link to post Share on other sites More sharing options...
stadman Posted April 10, 2012 Share Posted April 10, 2012 You certainly find some gems of buildings. Not that I shouldn't myself just don't get out enough. Notice Roskear Junction Box still has it's cast iron plate on it though Sunday. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.