jcm@gwr Posted July 17, 2016 Share Posted July 17, 2016 Hi Guys, I hope someone can help me here, about a couple of weeks ago I'm sure, no, I know I read a post about a lifting section (in front of a door) that used pasting table hinges and 2 unusually shaped bits of plywood to lift the section clear of the baseboard. There was also a link in the post to a similar hinge assembly, but in steel, it was quite substantial! I have searched back for a month (that's 85 pages!) and also tried the search box using every variation of lifting/hinged section/flap and wallpapering/pasting hinges that I can think of, can anyone put me out of my misery and point me in the right direction? Link to post Share on other sites More sharing options...
RMweb Gold teaky Posted July 17, 2016 RMweb Gold Share Posted July 17, 2016 This one? http://www.rmweb.co.uk/community/index.php?/topic/102167-lift-out-section-problems-help/ Link to post Share on other sites More sharing options...
RMweb Gold teaky Posted July 17, 2016 RMweb Gold Share Posted July 17, 2016 Or? http://www.rmweb.co.uk/community/index.php?/topic/90925-causeway-junction-rebornlarge-modern-image-dcc/page-2 Link to post Share on other sites More sharing options...
RMweb Gold teaky Posted July 17, 2016 RMweb Gold Share Posted July 17, 2016 I searched for 'hinged section' and these were around six pages into the results. Link to post Share on other sites More sharing options...
jcm@gwr Posted July 17, 2016 Author Share Posted July 17, 2016 Thanks Rob, But no, those are lift-out sections, not hinged. The one I'm looking for is definitely hinged. The hinge point is under the fixed baseboard, and nothing shows above, the 2 interestingly shaped pieces of ply allow the section to end up well above, and back from the edge of, the fixed baseboard. Link to post Share on other sites More sharing options...
kandc_au Posted July 18, 2016 Share Posted July 18, 2016 Jeff, Have you looked at blogs? Like you I have a feeling I read it recently also. HTHKhris Link to post Share on other sites More sharing options...
jcm@gwr Posted July 18, 2016 Author Share Posted July 18, 2016 No I haven't, but then I don't normally, so it's unlikely that's where I would have seen it. But the fact that you remember the article gives me hope that I'm not imagining it! Link to post Share on other sites More sharing options...
Devo63 Posted July 18, 2016 Share Posted July 18, 2016 Hi Jeff, I feel certain the article you are after is by St Enodoc. There are about 40 pages to wade through but it should be in the latter postings somewhere http://www.rmweb.co.uk/community/index.php?/topic/94350-mid-cornwall-lines-1950s-western-region-in-00/ Dave R. Link to post Share on other sites More sharing options...
jcm@gwr Posted July 19, 2016 Author Share Posted July 19, 2016 Thanks Dave, Found it on page 4, trouble is, I can't work out how I got there in the first place! Maybe it was via another link. Now I can get on with stealing the idea (with a bit of modification) for the club's layout! Cheers, Jeff Link to post Share on other sites More sharing options...
RMweb Gold teaky Posted July 19, 2016 RMweb Gold Share Posted July 19, 2016 Like it. I'm glad I chipped in now. My contribution was no use whatsoever but has led me to something interesting that I had missed when originally posted. (Thanks Jeff and Dave.) Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted October 14, 2016 RMweb Premium Share Posted October 14, 2016 Thanks Dave, Found it on page 4, trouble is, I can't work out how I got there in the first place! Maybe it was via another link. Now I can get on with stealing the idea (with a bit of modification) for the club's layout! Cheers, Jeff Glad you like it Jeff. If I were doing it again I'd try a bit harder to make it go "over centre" when it's up so that would stay up even if the bolt came out. Link to post Share on other sites More sharing options...
jcm@gwr Posted October 16, 2016 Author Share Posted October 16, 2016 Glad you like it Jeff. If I were doing it again I'd try a bit harder to make it go "over centre" when it's up so that would stay up even if the bolt came out. That's an interesting possibility, I might consider the same. Unfortunately it's on hold at the moment as we've got a problem with the floor that I'm having to resolve. On the up-side, I've discovered your brilliant thread, which I'm now reading and enjoying! Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.