HOTTODDY Posted April 6, 2018 Share Posted April 6, 2018 I have asked this question before and I was kindly given an answer, but I have mislaid it. Very annoying, but at my age it happens quite often! Anyway, the articles I refer to were about readers ideas and designs, featured over several issues, in the 80s and 90s (I think!!!?). In particular, the one I would like to see again, is one which used an upturned record deck, which acted as a flywheel and modified with indexing slots around the rim. If anyone can tell me which magazine it was in, I would be most grateful and promise to write it down in a safe place , so that I can find it again!!. Thank you all for your patience and tolerance, Tod Link to comment Share on other sites More sharing options...
RMweb Premium kevinlms Posted April 7, 2018 RMweb Premium Share Posted April 7, 2018 I have asked this question before and I was kindly given an answer, but I have mislaid it. Very annoying, but at my age it happens quite often! Anyway, the articles I refer to were about readers ideas and designs, featured over several issues, in the 80s and 90s (I think!!!?). In particular, the one I would like to see again, is one which used an upturned record deck, which acted as a flywheel and modified with indexing slots around the rim. If anyone can tell me which magazine it was in, I would be most grateful and promise to write it down in a safe place , so that I can find it again!!. Thank you all for your patience and tolerance, Tod RM January 1993 pages 20 - 22? Link to comment Share on other sites More sharing options...
RMweb Premium kevinlms Posted April 7, 2018 RMweb Premium Share Posted April 7, 2018 I've found your previous request. http://www.rmweb.co.uk/community/index.php?/topic/116599-turntable-motor-indexing-system-featured-in-the-1980s/?hl=indexing Link to comment Share on other sites More sharing options...
HOTTODDY Posted April 10, 2018 Author Share Posted April 10, 2018 (edited) Thank you all for the link to the article, That was very kind. Thanks to Kevnims for finding my original post. I did search for it before my new posting, but I couldn't remember how far back I had to go. All I have to do is find a copy of said article......? Anyone got it, to scan and email it to me please? Thanks again Tod Edited April 10, 2018 by HOTTODDY Link to comment Share on other sites More sharing options...
weklein Posted March 3, 2020 Share Posted March 3, 2020 (edited) This is awesome. Thank you very much for the information. Thanks myloweslife Edited March 4, 2020 by weklein spelling Link to comment Share on other sites More sharing options...
DCB Posted March 3, 2020 Share Posted March 3, 2020 On 07/04/2018 at 11:29, kevinlms said: I've found your previous request. http://www.rmweb.co.uk/community/index.php?/topic/116599-turntable-motor-indexing-system-featured-in-the-1980s/?hl=indexing The video does not seem to be available. In the UK there was pressure from the board of trade to stop the practice of running tender first and later a speed limit, 40 mph I believe on tender locos running tender first. This did not apply to tank locos and speeds of over 60mph were scheduled for tank locos running bunker first on the GWR. Incidentally I have seen a log for a 94XX Pannier on 8 coaches running at 60 down through Maidenhead deputising for a 61XX and losing time. When the Turntable at Penzance was out of action the (G)WR drated in extra 51XX tanks to run the man line trains to replace the usual tender locos. The usual turntable problem is the deck should move and the disc below stay still The only way I can see to do it is have the mechanism and indexing below the baseboard and the deck above For full realism the indexing should only drop in when the deck is perfectly aligned so a few attempts going too far then not enough before it drops in will add that touch of realism Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now