LongRail Posted January 18, 2021 Share Posted January 18, 2021 Unfortunately I am not a member I emailed them and received a phone call but they wouldn't confirm if the have moulds for the minibus fronts i am after Link to post Share on other sites More sharing options...
jonhall Posted January 19, 2021 Share Posted January 19, 2021 8 hours ago, LongRail said: Unfortunately I am not a member I emailed them and received a phone call but they wouldn't confirm if the have moulds for the minibus fronts i am after They may not know yet, its a pretty big range, and there will be lots of moulds where someone has to work out whats on each, and can it still be used - and since the various brands have been split, there may also be moulds that are split between them. Jon 1 Link to post Share on other sites More sharing options...
wainwright1 Posted January 19, 2021 Share Posted January 19, 2021 19 hours ago, LongRail said: Unfortunately I am not a member I emailed them and received a phone call but they wouldn't confirm if the have moulds for the minibus fronts i am after I have the January Model Bus Journal. They are listing the following as available: ref: R045 Ford Transit 1970 Minibus Front £1.50. ref: R055 Ford Transit Bonnet, Body Front and Headlamps Mk2 £1.75. ref: R813 Ford Transit Early Style Wheels with Separate Trim £1.50. If that is of assistance. Ray 1 Link to post Share on other sites More sharing options...
LongRail Posted January 19, 2021 Share Posted January 19, 2021 Thanks ray r055 is the one I am after may have to join and purchase a couple of them given they only sell to members because of tax restrictions apparently Link to post Share on other sites More sharing options...
RMweb Gold Popular Post Bucoops Posted January 20, 2021 RMweb Gold Popular Post Share Posted January 20, 2021 I hope nobody is offended by a suggestion - would it be better to discuss the future availability of ABS products in a different thread? Leaving this one for memories of Adrian 6 15 Link to post Share on other sites More sharing options...
wainwright1 Posted January 20, 2021 Share Posted January 20, 2021 6 hours ago, Bucoops said: I hope nobody is offended by a suggestion - would it be better to discuss the future availability of ABS products in a different thread? Leaving this one for memories of Adrian Good idea, as there will be developments covering the different ranges as time progresses. RIP Adrian. Ray 2 3 Link to post Share on other sites More sharing options...
Guest Jack Benson Posted January 27, 2021 Share Posted January 27, 2021 Last week, I bought a copy of Bradley’s LSWR Drummond Locomotives from a local book seller. Inside the frontpiece was a hand written owner’s name, Adrian Swain, Napier Road. As a friend of Adrian a fellow EMGS Wimborne group member, this was rather poignant. There was a little note inside, no doubt a reminder to check some facts. Adrian will always be missed by those who knew him and his generosity. Tim Link to post Share on other sites More sharing options...
jimwal Posted January 28, 2021 Share Posted January 28, 2021 On 20/01/2021 at 08:55, Bucoops said: I hope nobody is offended by a suggestion - would it be better to discuss the future availability of ABS products in a different thread? Leaving this one for memories of Adrian There is another thread titled: 'ABS Models (Adrian Swain)'. Maybe it could be used rather than start another thread. 2 Link to post Share on other sites More sharing options...
wainwright1 Posted January 29, 2021 Share Posted January 29, 2021 On 28/01/2021 at 00:04, jimwal said: There is another thread titled: 'ABS Models (Adrian Swain)'. Maybe it could be used rather than start another thread. I have raised one for Buses under the Road Vehicles section. All the best Ray Link to post Share on other sites More sharing options...
djparkins Posted October 14, 2021 Author Share Posted October 14, 2021 To end the speculation and to keep discussions to another area, I am just posting a link here to our own web site about several of Adrian's ranges - https://www.djparkins.com/home.php?cat=350 I shall post more details on the thread about ABS Models in the Small Suppliers section in a day or two. Regards to all, David Parkins 4 1 1 Link to post Share on other sites More sharing options...
wainwright1 Posted October 14, 2021 Share Posted October 14, 2021 11 minutes ago, djparkins said: To end the speculation and to keep discussions to another area, I am just posting a link here to our own web site about several of Adrian's ranges - https://www.djparkins.com/home.php?cat=350 I shall post more details on the thread about ABS Models in the Small Suppliers section in a day or two. Regards to all, David Parkins Thanks David. That covers the 7mm ranges and I am sure a lot of people will be happy. Now all we are waiting for is the 4mm kits to be re-issued. All the best Ray Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now