pteandy1402 Posted February 2, 2023 Author Share Posted February 2, 2023 (edited) #tamper Edited July 8, 2023 by pteandy1402 2 Link to post Share on other sites More sharing options...
pteandy1402 Posted February 2, 2023 Author Share Posted February 2, 2023 08-16 tamper very slowly coming along, writing taking an age with over 30 smd led for all the lighting. 3 Link to post Share on other sites More sharing options...
pteandy1402 Posted February 7, 2023 Author Share Posted February 7, 2023 Slowly adding the detail working strip lights using 0.75mm fibre optic and spot lights I 3d printed and 0603smd leds. Coupling hook, air pipes and siren added. Brass etch wipers added. All the lights are functional again using 0603 smd leds. Smd resistors on laid dcc resistor boards adjust the relative brightness and fine adjustments made on the decoder 3 Link to post Share on other sites More sharing options...
pteandy1402 Posted February 7, 2023 Author Share Posted February 7, 2023 The speaker is a em1 which is the same as the accurathrash speaker is hidden inside the engine and barely visible with the roof on 2 Link to post Share on other sites More sharing options...
pteandy1402 Posted February 7, 2023 Author Share Posted February 7, 2023 I've added thin strips of masking tape which is meant for coach roof welds but it looks the part on the roof on here. 3 Link to post Share on other sites More sharing options...
pteandy1402 Posted February 7, 2023 Author Share Posted February 7, 2023 I have got a selection of figures from modelu that I am going to paint up and fit, the cabs will all have controls, seats and cab lighting so these will really finish the model of 2 1 Link to post Share on other sites More sharing options...
pteandy1402 Posted March 4, 2023 Author Share Posted March 4, 2023 Head and tail lights working with yard, day and night mode. Front strip lights and spot lights and cab light all tested, legomanbiffo sound working through a accurthrash speaker. 7 1 Link to post Share on other sites More sharing options...
pteandy1402 Posted June 4, 2023 Author Share Posted June 4, 2023 3d printed pantograph will for nmt coach and nmt hst stripped and exhaust deflectors removed 6 Link to post Share on other sites More sharing options...
pteandy1402 Posted June 4, 2023 Author Share Posted June 4, 2023 Bachmann MPV updated with green rejoiced on cab sides and above cantrail, 3d printed gaurd frame and awaiting chrome paint. 4 Link to post Share on other sites More sharing options...
virginhst539 Posted June 4, 2023 Share Posted June 4, 2023 NMT roof well looks superb. These avaliable anywhere for buying? Link to post Share on other sites More sharing options...
pteandy1402 Posted June 5, 2023 Author Share Posted June 5, 2023 (edited) On 04/06/2023 at 20:53, virginhst539 said: NMT roof well looks superb. These avaliable anywhere for buying? I drew them myself and got one of the lads at the club to 3d print them, I cut a hole in the roof and glued this in. I'm fitting a fresnel lens and blue leds and having the beam of blue light to scan the ohle Edited June 5, 2023 by pteandy1402 2 Link to post Share on other sites More sharing options...
virginhst539 Posted June 5, 2023 Share Posted June 5, 2023 cant wait to see it finished with the blue light. certainly an odd site when its running about in the dark. its on my hit list to do at some point 1 Link to post Share on other sites More sharing options...
LMSfan72 Posted June 5, 2023 Share Posted June 5, 2023 (edited) 4 hours ago, pteandy1402 said: I drew and 3d printed them myself, I cut a hole in the roof and glued this in. I'm fitting a fresnel lens and blue leds and having the beam of blue light to scan the ohle I did a similar thing! Edited June 5, 2023 by LMSfan72 4 1 Link to post Share on other sites More sharing options...
pteandy1402 Posted June 27, 2023 Author Share Posted June 27, 2023 https://youtu.be/EdcY3vgzufU 1 Link to post Share on other sites More sharing options...
pteandy1402 Posted June 27, 2023 Author Share Posted June 27, 2023 4 Link to post Share on other sites More sharing options...
pteandy1402 Posted July 7, 2023 Author Share Posted July 7, 2023 Avanti voyager respray using Bachmann virgin donor, lightly weathered 12 Link to post Share on other sites More sharing options...
WCML100 Posted July 8, 2023 Share Posted July 8, 2023 Thats seriously good! Well done mate 😃 Link to post Share on other sites More sharing options...
RMweb Premium njee20 Posted July 8, 2023 RMweb Premium Share Posted July 8, 2023 Fantastic, lovely job! Link to post Share on other sites More sharing options...
pteandy1402 Posted July 14, 2023 Author Share Posted July 14, 2023 Lights getting fitted using 0603 smd leds, loksound fx 5 in the rear unit and a accurathrash speaker and esu sugarcube. Loksound v5 in the front and micro connectors running the length of the rake to connect all the pickups and have a speaker in 4 of the 5 units. Michael lomax of code 3 models on YouTube is making me some mini displays and coach lighting, it will also have door open lights and cablights. 4 1 Link to post Share on other sites More sharing options...
WCML100 Posted July 17, 2023 Share Posted July 17, 2023 Nice work! Looking good on making tracks too! I to have had Michael Lomax work on a voyager and add destination screens in the drivers windows 😃 Link to post Share on other sites More sharing options...
pteandy1402 Posted August 10, 2023 Author Share Posted August 10, 2023 Completly finished the DRS class 57304 respray, I used Phoenix Precision paints for the DRS blue,Rainbow Railways Green fade decals and Railtecs tiny detail decals I had left from another project. I used Foc Transfers etched Nameplates for the PRIDE OF CHESHIRE. I used Illuminated Models lighting boards to use all the different lighting functions including night, day and yard mode. I added cablights and used a ESU loksound v5 to run it with a Accurascale speaker and ESU sugarcube with ESU hifi sound. It has a Precision labels posable folding Dellner coupling at each end. 4 1 Link to post Share on other sites More sharing options...
pteandy1402 Posted September 6, 2023 Author Share Posted September 6, 2023 Here are some of Micheal lomaxs destination boards on my Avanti Super Voyager on making tracks 3. 2x Legomanbiffo sound decoders through accrathrash speakers and Railtecs decals 2 Link to post Share on other sites More sharing options...
pteandy1402 Posted September 6, 2023 Author Share Posted September 6, 2023 2 Link to post Share on other sites More sharing options...
pteandy1402 Posted September 6, 2023 Author Share Posted September 6, 2023 My Accurascale class 37, 2x DRS coaches resprayed by me with 3d printed corridor blanking plates, grills for the bathroom and subtley weathered using lifecolour weathering washes and weathering shades and weathered Accurascale KUA wagons. Legomanbiffo sound through the accurathrash speaker and illuminated models flashing tail lamp module controlled by esu dcc light strip 2 Link to post Share on other sites More sharing options...
pteandy1402 Posted September 6, 2023 Author Share Posted September 6, 2023 37418 respray to run with Revolution trains new Caroline coach, Bachmann body resprayed using Precision paints, Railtec decals, Fox transfers etched plates, in the background a Hornby NMT respray as it has the old blue strip network rail livery. 3 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now