Lissadell Posted February 26, 2023 Share Posted February 26, 2023 I have an 0 gauge Dapol loco fitted with an MS440C decoder. The sound file that is loaded provides for some features to be operated by the keys in different ways. One method effects an on/off change by toggling the appropriate key. Fine if you can hear a difference eg coal shovelling. Not just as easy (at least to the less experienced ear) for something like Reverser control (F5) which can change from Full Gear to Cut off. My present controller, Digitrax DCS51, can’t indicate when such a switch is “enabled/disabled”. My question is, can the newer model, Digitrax DCS52, present this information? May I ask another question please, does the DCS52 display speed steps? Thanks for any help from experienced colleagues Adrian Link to post Share on other sites More sharing options...
Nigelcliffe Posted February 27, 2023 Share Posted February 27, 2023 Function states displayed. Speed is displayed as percentage of throttle (0-100) which has been a Digitrax approach for decades, rather than speed steps. ( The manual is on the maker's website covering this stuff ). - Nigel Link to post Share on other sites More sharing options...
RMweb Premium Steven B Posted February 27, 2023 RMweb Premium Share Posted February 27, 2023 If you're thinking of changing from a DCS51 to DCS52, don't forget that you could simply add one of Digitrax's controllers to the DSC51. The retired DT500, DT402 and current UT6 and DT602 should all display function states when plugged into the DSC51. Steven B. Link to post Share on other sites More sharing options...
Ron Ron Ron Posted February 27, 2023 Share Posted February 27, 2023 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now