sixteen 12by 10s Posted October 31, 2009 Share Posted October 31, 2009 Hallo all Hopefully you can read this, and see the images it will mean I have successfully crossed over from the ???other side???!. Just to recap on my layout. The prototype (all totally fictitious) The North British railway where eager to get a connection on to the island of Mull, to rival the Oban and Cal lander railway.Construction started to provide a railway from Locharlot to Ardslignish on Loch Sunnart. Construction started but was soon met by protests from local land owners, the area being prime hunting country, and the Lairds had friends in high places. The project was doomed from the start and the line only progressed as far as Glenuig.At Glenuig the line was prematurely terminated, but was opened to serve the remote community. With the arrival of reliable transport,the Village became and important fishing harbor and a ferry service was established to the small islands. The local ???water of life???distillery, ???Moidart???, soon had its own siding and this traffic ,fish and timber helped the line survive. The scene is set between 1975 and 1985, the transition between BRCW type 2s and EE type 3s.The traffic consists of 2 coach train, with the occasional mixed, two coaches and a TTA, a small goods service, timber, grain, and fish,and an engineers train.?� Themodel 4mm,EM gauge, the space of the scenic part is 7feet by 18 inch. . The layout is to be eventual DCC and locos are fitted with sound. The track is constructed using C&L components.?� The distillery building, is cut from ply, covered with embossed stone plasticard, then smeared with a thin layer of milliput in places. The whole lot was then stippled with a mix of emulsion paint and tile grout. The windows are from C&L and the gutters and downpipes Ratio. The roof is made from corrugated plasticard cut in to strips to represent 8 by 4 panels, and the ends are sanded back to represent rusted edges. The distillery buildings are complete. After getting the roof right on the maltings, I thought I was past the worst challenge, then when constructing the large building, I tried to get two Wills slate sheets to join. After several attempts I found that this was virtually impossible and did the best I could with blending the two sections in with filler. I then tried to disguise the joint by adding a representation of lichen, I think its just about expectable, may be pantiles would look better?. The wording on the side was done by first setting it out on the computer and printing, then tracing it on to the side with pencil, and then hand painting the letters with acrylic paint. The inscription ???uisge beatha??? is scots ?�gaelic for ???water of life???, whiskey. On the old forum there was a great debate about the back scene, I can now report that after a trip of 1300 miles I have the photos for my photographic one. This in itself turned out to be a bit of an epic. I had arranged a weeks holiday in Scotland mainly based on Skye. We traveled up first to Oban and then on to Skye via the Mallaig, and call in to Glenuig fro the ???photo???the way. We would return via Kyle and the bridge thus avoiding the ??26 ferry fare. On the day the weather wasn't to bad, but with not good viability. While I was busy, one, with the camera and two, trying to sort out a problem at work by mobile phone 500 miles away, my good lady spotted something in the water. This turned out to be an otter. We watched the otter fishing for about an hour before traveling to Mallaig and arriving with seconds to spare for our ferry. After four days on Skye we woke up on the day we were leaving to clear blue sky's and good visibility. So I paid the ??26 again and went back to Glenuig for a second attempt, bingo. A bit of work on photoshop and I should have my backsceen.The final photo in an experimentation of what how the backsceen will look. I now have a set of good photos of the structures at Tydrum, Bridge ofOrchy, Genfinann and Arisaig. I think I will use the box and Station building from Arisaig, and will post the photos as an entry in the prototype section I think I have waffled on long enough now, so see ya soon Gary 8 Link to post Share on other sites More sharing options...
F-UnitMad Posted October 31, 2009 Share Posted October 31, 2009 Glad to catch up with this layout thread again; reading and watching, Sir!!! Link to post Share on other sites More sharing options...
MacRat Posted October 31, 2009 Share Posted October 31, 2009 Glad to see this again. Mac Link to post Share on other sites More sharing options...
MRDBLUE17 Posted October 31, 2009 Share Posted October 31, 2009 Hi Gary, Great to see your layout updates back up and running again. Those latest shots are fantastic. The Black and white shot of the 27 and the last one looking beyond the platform are truly amazing. After seeing your work and Daves photographic backscenes I can see the need to get mine right on Rannoch if i am to get it anywhere near as convincing as you have achieved already! Looking forward to seeing more of your layout, Mark Link to post Share on other sites More sharing options...
yellowvanman Posted October 31, 2009 Share Posted October 31, 2009 Hi Gary ,Another great layout based in Scotland ,looks like it will have plenty of top- notch B.R blue locos ect..as well as superb scenery . cheers Keith . Link to post Share on other sites More sharing options...
63C Posted November 1, 2009 Share Posted November 1, 2009 Hi Gary very impressive modelling, how did you construct the platforms/platform faces. cheers 63C Link to post Share on other sites More sharing options...
clive hayward Posted November 1, 2009 Share Posted November 1, 2009 Hello Gary, this looks excellent and look forward to seeing how the layout progresses. I live a lot closer to the chosen location than you do so if you need any new photos just let me know and I'll see what i can do. regards Clive Link to post Share on other sites More sharing options...
sixteen 12by 10s Posted November 2, 2009 Author Share Posted November 2, 2009 Thank you for all your good comments, and yet more offers of photographs, at this rate I won't have an excuse to head for North West Scotland. The trip was not just for the photographs, but as I have commented before my partner and myself love the place. Those of you who have not sat on the rocks at Mallaig or got on a boat out to the islands don't know what your missing, and its not all midges and rain!!. Just a some prototype information, the platform faces on the West Highland extension are made from lime biased concrete. the exception now is Glenfinann that has had its platforms rebuilt. The model first, the faces were constructed from battens of softwood. The deck, was made with 6mm ply, cut a few mill over the size of the battens and then a taper was sanded on the lower edge and glued on to the battens, this was the warped in masking tape. The edge paving was formed of individual pieces of 1mm thick card. The surface is made by spreading a thin layer of PVA then sieving tile grout over the top. Painting and weathering was done with emulsion and acrylics. 28 weeks till my next scheduled visit to Scotland, ( not as if I am counting!!) 3 Link to post Share on other sites More sharing options...
Clagmeister Posted November 2, 2009 Share Posted November 2, 2009 Can't agree more re Scottish sentiments. I'll be off there shortly for tips re the linkspan for Carls super ferry when it arrives. Have you seen the pics on his Heb thread in the Scratbuilding section I'm also going to do some recording of ferrys coming and going at Oban. Bliss!!! I think I'm mental, but chuffed I'm not the only one. cheerio Claggy Link to post Share on other sites More sharing options...
sixteen 12by 10s Posted November 2, 2009 Author Share Posted November 2, 2009 Yes i have seen the thread of the building of your ferry. I will try not to diversify into the strange following for these car ferry's i have, and this photo is out of the context of this forum but why not?, just one. Lord of the Isles approaching Oban 19/09/08 1 Link to post Share on other sites More sharing options...
Clagmeister Posted November 2, 2009 Share Posted November 2, 2009 Back to the railway, How did you do your rocks on the sea shore? They look particuarly good. cheerio Claggy Link to post Share on other sites More sharing options...
P.C.M Posted November 2, 2009 Share Posted November 2, 2009 Hi Gary, I must agree with everyone else, it's a cracking looking layout. The buildings and weathering are great. Cheers Peter, Link to post Share on other sites More sharing options...
pinecreekrr Posted November 3, 2009 Share Posted November 3, 2009 Hi Gary : I'd missed this layout on the older version of RMWeb, but am quite impressed by the beautiful work you've done on the buildings and scenery. I'm looking forward to seeing your efforts on the signal box and station. What a fine bit of modelling. Bruce Link to post Share on other sites More sharing options...
sixteen 12by 10s Posted November 5, 2009 Author Share Posted November 5, 2009 Hi all Bit that I had been dreading, the rocky coast.I completed this sometime ago, but have only just found time to wright this piece. I picked the coast in front of the distillery to experiment on. The basic shape was cut from polystyrene using a hot wire cutter. Random pieces of polystyrene were then cut and PVA glued to the surface. The whole thing was then painted with a thick mix of exterior filler. More smaller rocks were added using kitty litter (unused, thanks to Molly the cat). The first paint wash was airbrushed on and colored light brown, followed by a mix of dark gray, gunmetal and satin varnish, to give the surface a sheen.Further dry brushing to add depth then the tops of the rocks were stippled with yellow/gray paint to represent lichen. The Green slime,was produced with a mix of PVA and dark green paint. The grass is from the Mininature range applied with an homemade ???fly swatter???applicator. Further vegetation has been added using sea moss and carpet felt. I still have about twice as much again, of rocky coast to finish as well as the riverbed, and the water. For some reason I have made a start on the quayside at the station end, this is about ?? complete so I will be posting some photos soon. I have handed the set of photos for the back scene, to a friend who is a dab hand with CS4 Dreamwever, so it should be ready for the printers soon.? I really should think about stock, i had saved up some trainset tokens to take to the NEC in a few weeks time, then the service light came up on the car, so bang go's that plan!. Link to post Share on other sites More sharing options...
RMweb Gold Russ (mines a pint) Posted November 8, 2009 RMweb Gold Share Posted November 8, 2009 Excellent to see this back up on the new forum! and with the construction details of the platform which is something I was going to ask about on the old forum, is the finished surface we actually see ie the painted bit based on the masking tape then? They look brilliant! The backscene is coming on very nicely and makes these type of small layouts. Link to post Share on other sites More sharing options...
sixteen 12by 10s Posted November 8, 2009 Author Share Posted November 8, 2009 Hallo Russ Glad to hear for you, i was starting to wounder were you had got to. The platform faces are just masking tape painted with emulsion and acrylics, i am quite pleased with the way they have worked out. Now down the cellar, i have started thinking about water. The water in the West Highlands tends to be crystal clear, so i thick that getting the base right will be the crux of it,. in the past i have used casting resin but i am open to suggestions, so if anyone out there as any ideas please let me know. Gary Link to post Share on other sites More sharing options...
sixteen 12by 10s Posted November 15, 2009 Author Share Posted November 15, 2009 Hi folks I have had one of thous days when nothing go's right, and even my photos are not in focus,time for a beer i think. For some reason, only known to myself, I decided to switch work to the other end of the layout and have a go at the quay. Having looked at some photos of the real thing, I decided to opt for a more modern look, the Glenuig authorities must have modernized it some time in the early 70's.? The concrete face has been produced in my usual way with emulsion and filler mix. Timbers have been added using softwood and various bits of ironwork using plastruct and plasicard. Next the hard standing,first a check rail was soldered to copper clad sleepers positions along the siding at five sleeper spacings, this was spaced from the running rail at 1mm. The whole thing was then covered in a thin layer of Dass modeling clay. Now to the painting, getting the color of concrete right always terrifies me. I stated with a light stone color and then stippled various shades of brown and gray on the top. After it was dry it looked a bit patchy, so I toned it down by airbrushing it with a thin cream color. I think the overall effect is expectable so I will leave it alone now. Looking at the layout now, I have noticed on big floor that could have been avoided if I had planed things better. After many sketches and several full size drawings I still managed to get the width of the water at the front of the quay to narrow. I had intended to put one of the Cal Mac island class boats tied up, but there isn't enough space. Perhaps the boat will wait for Glenuig 2, and then after seeing Clagmiesters commission I will base the whole layout around a ferry, the Pioneer perhaps!. Dam, it looks like he's about to beat me to it. Gary 2 Link to post Share on other sites More sharing options...
carl1967 Posted November 15, 2009 Share Posted November 15, 2009 Hi folks I have had one of thous days when nothing go's right, and even my photos are not in focus,time for a beer i think. For some reason, only known to myself, I decided to switch work to the other end of the layout and have a go at the quay. Having looked at some photos of the real thing, I decided to opt for a more modern look, the Glenuig authorities must have modernized it some time in the early 70's. The concrete face has been produced in my usual way with emulsion and filler mix. Timbers have been added using softwood and various bits of ironwork using plastruct and plasicard. Next the hard standing,first a check rail was soldered to copper clad sleepers positions along the siding at five sleeper spacings, this was spaced from the running rail at 1mm. The whole thing was then covered in a thin layer of Dass modeling clay. Now to the painting, getting the color of concrete right always terrifies me. I stated with a light stone color and then stippled various shades of brown and gray on the top. After it was dry it looked a bit patchy, so I toned it down by airbrushing it with a thin cream color. I think the overall effect is expectable so I will leave it alone now. Looking at the layout now, I have noticed on big floor that could have been avoided if I had planed things better. After many sketches and several full size drawings I still managed to get the width of the water at the front of the quay to narrow. I had intended to put one of the Cal Mac island class boats tied up, but there isn't enough space. Perhaps the boat will wait for Glenuig 2, and then after seeing Clagmiesters commission I will base the whole layout around a ferry, the Pioneer perhaps!. Dam, it looks like he's about to beat me to it. Gary hi gary there are lots of calmac ferrys for you to have m8 1 Link to post Share on other sites More sharing options...
sixteen 12by 10s Posted November 15, 2009 Author Share Posted November 15, 2009 Maybe the Juno? Link to post Share on other sites More sharing options...
Clagmeister Posted November 15, 2009 Share Posted November 15, 2009 Sorry Gary, Could you get Lochmor the old small isles ferry into that space, it was a small boat? It looks like Pioneer is next to go on the slip. I did think about a streaker but they never really got out of the Clyde/Bute area. On pure looks a streaker is better anyway. Also I can't see any reason why they couldn't interchange for winter relief work anyway. Is your next layout going to be for shows? If so it wouldn't harm to alter the ships around now and then would it cheerio Mike PS Your railway looks better than mine Link to post Share on other sites More sharing options...
Waverley West Posted November 16, 2009 Share Posted November 16, 2009 Hi Gary, Good to see that this quality layout has made it "to the other side". Your work just oozes atmosphere. Absolutely superb. Am really looking forward to watching this develop. Cheers for now, Dave Waverley West Link to post Share on other sites More sharing options...
sixteen 12by 10s Posted December 28, 2009 Author Share Posted December 28, 2009 Hello all I has been some time since my last update, and during this time things have moved on. I have spent the last few weeks finishing the rocks at the front, and the basic scenery is now complete. I have started to build and convert some stock, and have a pile of Parkside Dundas kits to get through. This last week i have made a start on the signal box. I have biased this on the one at Arisaig, although this has been disused, since the introduction of radio signaling in the eighty's, it is still relatively intact. The model is basically plasticard, the planks been scored on. ? I am just about to tackle the brackets under the eaves, they look fiddly, only the next few hours will tel whether i am successful, or give up and go down the pub. The loco fleet is about to expend, with the arrival of a class 26 , as i here thousands of screams of ???rare for the West Highland???, yes they were, but they were not totally unknown to venture to Fort William. The Bachmann coach wheels are standing by for the EM conversion, and I'd better make it a Haymarket one. A veiw looking towards the station, the patch of ground on the left is the site of the signal box ? 4 Link to post Share on other sites More sharing options...
P.C.M Posted December 28, 2009 Share Posted December 28, 2009 Hi Gary, I think Glenuig is looking superb the senic work and stock are great and it has a real Scottish feel to it. It's a shame you haven't left room for a boat, is possable to make the baseboard a bit wider? Maybe curving out from the fiddle yard end to where the station is, just a thought. I don't blame you for buying a class 26 either they are a great little loco, I bought one myself and I don't model the Scotttish region, not yet anyway. Cheers Peter, Link to post Share on other sites More sharing options...
RMweb Gold Russ (mines a pint) Posted December 28, 2009 RMweb Gold Share Posted December 28, 2009 The loco fleet is about to expend, with the arrival of a class 26 , as i here thousands of screams of ???rare for the West Highland???, yes they were, but they were not totally unknown to venture to Fort William. Always nice to see more progress, -there is a pic of 26 on Glenfinnan viaduct in anycase IIRC, cant remember which and my books are all packed up! Link to post Share on other sites More sharing options...
sixteen 12by 10s Posted December 29, 2009 Author Share Posted December 29, 2009 ? Thanks all for the advise on the class 26, just trying to add some verity to the loco fleet. A class 37 will complete the motive power selection. The debate about boats and ferry's go's on, if i do anything i think i will extend the board out at the front of the quay enough to get a model of the Lochmor in. http://www.shipsofca...vessel=lochmor1 This was a relatively small boat but the board will need extending by at least 3???. The signal box build is on its final stages, i resisted the temptation to give up and seek refreshment, photos will follow shortly. Thanks Gary Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now