Peppercorn Posted December 4, 2010 Share Posted December 4, 2010 Good afternoon, all. My very first posting and its a question, I'm afraid. I airbrushed several Ratio coach roofs using Humbrol acrylic (now made in China!) that I'd thinned using water. I had carelessly not set the airbrush (Paasche HS) correctly so ended up with a mess, a right old horlicks of a paint job. I have either to throw the roofs away or to strip them: does anyone what will bring acrylic off? Link to comment Share on other sites More sharing options...
Mike G Posted December 4, 2010 Share Posted December 4, 2010 Modelstrip..does not harm plastics as far as I'm aware. Mike Link to comment Share on other sites More sharing options...
big_daddy_ray Posted December 4, 2010 Share Posted December 4, 2010 Hi, Mr Muscle oven cleaner has worked a treat form me in the past though that was factory finished Hornby and Lima models but it takes the paint straight off, just spray it on put in a sealed bag for about an hour come back wash it off little rub here and there bob's your uncle, would recommend trying on just the one roof just to make sure there's no reaction with the ratio plastic, I've also use neat IPA when weathering and this is very effective but try and do that as soon as possible, hope this helps if I can think of anything else I post it Link to comment Share on other sites More sharing options...
bertiedog Posted December 4, 2010 Share Posted December 4, 2010 If the Humbrol Acrylic paint is similar to Tamiya Acrylic, then Oxi-Clean powder in warm solution will safely remove acrylic paint and varnish, it is not strong enough (less alkali than Mr Muscle,(Caustic Soda)), .to remove enamel, and cellulose paint. By warm I mean about blood temperature, just not a dead cold solution. It can be as quick as a few minutes to dissolve the paint. It is used by artists etc., for Acrylic paints of most types, and definitely will have no ill effect on plastics. Stephen. Link to comment Share on other sites More sharing options...
Peppercorn Posted December 7, 2010 Author Share Posted December 7, 2010 Thanks all for this. I'll give this a try at the weekend. I thought - wrongly, clearly, that acrylic was untouchable in the same way as household emulsion is. Link to comment Share on other sites More sharing options...
54Strat Posted December 8, 2010 Share Posted December 8, 2010 I've used Fairy Power Spray before, and believe it or not, Dettol too. Kitchens are a great place to experiment in. Soak the model for a while, and scrub using the wife's toothbrush . Shouldn't harm the plastic. Paul Link to comment Share on other sites More sharing options...
Peppercorn Posted December 12, 2010 Author Share Posted December 12, 2010 Soaked overnight in caustic soda solution - the nearest thing local hardware shop had to Mr Muscle. Roofs now ready for painting again. I'll do it P properly this time: Halford's primer then enamel. I'm not so sue about acryloic any more. Thanks all for your advice Link to comment Share on other sites More sharing options...
dymstocklr Posted December 15, 2010 Share Posted December 15, 2010 Halfords primer is acrylic these days! Link to comment Share on other sites More sharing options...
Campaman Posted December 16, 2010 Share Posted December 16, 2010 Anyone tried normal soda crystals?, I have a couple of wagons that have been painted with acrylics that I would like to strip back and re-paint. Link to comment Share on other sites More sharing options...
Kenton Posted December 16, 2010 Share Posted December 16, 2010 If by "soda crystals" you mean sodium borate - I doubt it will work on paint - but it will work on any brass. If brass is left immersed in a strong boric solution it is blackened. Link to comment Share on other sites More sharing options...
RMweb Premium M.I.B Posted December 16, 2010 RMweb Premium Share Posted December 16, 2010 Car brake fluid will strip most paints - but do not put steel based parts in - it'll corrode steel very quickly. An overnight soak will get 99% of paint off a plastic wagon body, then pick off the loosened stuff with a tooth pick or a dentists probe. I use an old tupperware box solely for doing this and you get a lot of paint removal sessionsout of a botle of brake fluid - re-use it, and when you are totally done with it, take it to the council tip and dispose of it responsibly - not down the drain. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.