RheneasTeminal Posted June 28, 2011 Share Posted June 28, 2011 I have 4 4 foot boards with semaphore signals on all 4 and want be be able to control all the signal arms from one control panel how can I do it? please help Link to post Share on other sites More sharing options...
Coombe Barton Posted June 28, 2011 Share Posted June 28, 2011 Electrically or mechanically? Link to post Share on other sites More sharing options...
Calnefoxile Posted June 28, 2011 Share Posted June 28, 2011 If you go to http://www.bmrg.org.uk and click on the layouts link at the top, then click on the Wartime link to the left of the window, then read through that, there are links off of the page to show how we've used RC Servos with the MERG Servo-4 kit, http://www.merg.org.uk/kitdetails.php?kn=2 These can be controlled via a switch on your control panel, the wiring goes across the board joints to the Servos mounted directly under the Signals. Also with the MERG Kit, you will get an authentic 'bounce' when the Signal is changed. Regards Neal. Link to post Share on other sites More sharing options...
RheneasTeminal Posted June 28, 2011 Author Share Posted June 28, 2011 Thank you for your help the servo idea is good but quite expensive to be honest Link to post Share on other sites More sharing options...
RheneasTeminal Posted June 28, 2011 Author Share Posted June 28, 2011 Electrically or mechanically? what is the mechanical way of operating them other than a ratio remote signal kit as they go direct to the signal without a brake Link to post Share on other sites More sharing options...
RMweb Gold beast66606 Posted June 29, 2011 RMweb Gold Share Posted June 29, 2011 You need to give us more information Do you want to be able to spilt the boards ? What signals are they ? If semaphore do you intend to make them worked mechanically or electrically ? Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.