JZ Posted February 21, 2012 Share Posted February 21, 2012 I am looking for sofas, bed, wardrobes etc in 4mm or 3.5, to fill a shop front.http://www.walthers.com/exec/productinfo/243-11700 I am building it in low relief, not that that makes much difference. Had a quick google, but to no avail. Does anyone know of any available ? Link to comment Share on other sites More sharing options...
Allegheny1600 Posted February 21, 2012 Share Posted February 21, 2012 Sorry, not offhand but....This sort of thing shouldn't be too difficult to scratchbuild, surely? I needed an old fashioned stove for my E.German signalbox so I scratchbuilt it from little lumps of plasticard and microstrip, along with a bit of filing! I know it's not "soft" furnishing as such but in H0 (or 4mm) it does't matter, does it? What do you think? All the parts ready for assembly, Assembled. Finished, painted, an old fashioned kettle placed on top and installed. Note that the chimney for the stove is actually the means of getting electric cables into the roof - unseen! I guess it took a little while to do but it certainly was good fun! Cheers, John E. Link to comment Share on other sites More sharing options...
Adrian Wintle Posted February 21, 2012 Share Posted February 21, 2012 Preiser has some furnishings: Office equipment: http://www.reynaulds...iser/17184.aspx Table and Chairs: http://www.reynaulds...iser/17217.aspx Fashion Boutique: http://www.reynaulds...iser/17700.aspx Kitchen: http://www.reynaulds...iser/17707.aspx Noch also does some beds etc in their risque Sexy Scenes line...http://www.reynaulds.com/catalog/dept_477.aspx and without the figures: Furniture: http://www.reynaulds.com/products/Noch/14832.aspx Furniture: http://www.reynaulds.com/products/Noch/14833.aspx Adrian Link to comment Share on other sites More sharing options...
Classsix T Posted February 21, 2012 Share Posted February 21, 2012 An ideal project for Plasticine I'd have thought. And show and tell 'cos I reckon you might give Cav some ideas for a discarded settee on Outon Road! C6T. Link to comment Share on other sites More sharing options...
Pugsley Posted February 21, 2012 Share Posted February 21, 2012 Or Fimo clay, which is better than plasticine as you can set it by baking. Link to comment Share on other sites More sharing options...
Removed a/c Posted February 21, 2012 Share Posted February 21, 2012 Not sure what these are like but their other products are great !! http://www.scalescenes.com/products/T004-Furniture-and-Lineside-Junk Link to comment Share on other sites More sharing options...
JZ Posted February 22, 2012 Author Share Posted February 22, 2012 Thanks for the replies. Looks like I may down the route of casting in resin from a master for the sofas and armchairs, but get the Prieser tables and chairs. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.