Ray Flintoft Posted January 24, 2020 Share Posted January 24, 2020 On 20/01/2020 at 23:53, landscapes said: Thank you Gilbert I was going to order 60505 only because it had the late crest on the tender. But I have changed tended totems before so 60501 is the one I will now order. I was thinking of pre ordering last weekend but wanted to try to find more information about the class in in connection with Haymarket MPD Thanks to Ray and yourself I can now order knowing it will be authentic to have 60501 running on my layout. I have acquired many photos of locomotives at Haymarket for reference purposes but never seen a photo of an A2/2 on shed with either the early or late totem on the tender. Regards David As Gilbert says , no. 60503 is not suitable she retained the original diagram 106A boiler to the end . No . 60501 & 60502 are both possible as they have identical , to the eye , tenders & had diagram 118 boilers from the early 1950,s . They both retained the original crest until late 1958 but you will have to watch for the lowered no. plate & the lipped chimney. 60501 definitely had both features in mid . 1958 . Hope this helps , Cheers , Ray . Link to comment Share on other sites More sharing options...
landscapes Posted January 24, 2020 Author Share Posted January 24, 2020 2 hours ago, Ray Flintoft said: As Gilbert says , no. 60503 is not suitable she retained the original diagram 106A boiler to the end . No . 60501 & 60502 are both possible as they have identical , to the eye , tenders & had diagram 118 boilers from the early 1950,s . They both retained the original crest until late 1958 but you will have to watch for the lowered no. plate & the lipped chimney. 60501 definitely had both features in mid . 1958 . Hope this helps , Cheers , Ray . Hi Ray Thank you for the information, that will certainly be a big help to me when it comes to ordering an A2/2, I am tending to go towards 60501 if the model when its produced is suitable for the 1958/1959 period. I have changed chimneys before on my models replacing existing plastic with white metal ones but it could be a problem if the smokebox number plate is in the wrong position and on a raised area on the smokebox door, I do not fancy pairing away with a scalpel knife but I do have a few spare A2 smokebox doors I purchased from Graeme King some time ago. It might be easier to replace the whole door if they are the correct size. Regards David 1 Link to comment Share on other sites More sharing options...
landscapes Posted January 24, 2020 Author Share Posted January 24, 2020 Good Evening A new photo showing B1 61025 Pallah passing Haymarket on the up Fish, in the period I am modelling 1958/1959 it must have been a trainspotters dream to pass this MPD bet you had to be quick at jotting down numbers. Regards David 17 Link to comment Share on other sites More sharing options...
millerhillboy Posted January 25, 2020 Share Posted January 25, 2020 11 hours ago, landscapes said: Good Evening A new photo showing B1 61025 Pallah passing Haymarket on the up Fish, in the period I am modelling 1958/1959 it must have been a trainspotters dream to pass this MPD bet you had to be quick at jotting down numbers. Regards David It was tough enough a job in the late 80s trying to scribble down as many numbers as possible as we flew past on the push pull service 1 1 Link to comment Share on other sites More sharing options...
bigwordsmith Posted January 25, 2020 Share Posted January 25, 2020 11 hours ago, landscapes said: Good Evening A new photo showing B1 61025 Pallah passing Haymarket on the up Fish, in the period I am modelling 1958/1959 it must have been a trainspotters dream to pass this MPD bet you had to be quick at jotting down numbers. Regards David Looking good David! 1 Link to comment Share on other sites More sharing options...
Ray Flintoft Posted January 27, 2020 Share Posted January 27, 2020 On 24/01/2020 at 20:49, landscapes said: Hi Ray Thank you for the information, that will certainly be a big help to me when it comes to ordering an A2/2, I am tending to go towards 60501 if the model when its produced is suitable for the 1958/1959 period. I have changed chimneys before on my models replacing existing plastic with white metal ones but it could be a problem if the smokebox number plate is in the wrong position and on a raised area on the smokebox door, I do not fancy pairing away with a scalpel knife but I do have a few spare A2 smokebox doors I purchased from Graeme King some time ago. It might be easier to replace the whole door if they are the correct size. Regards David I am sure you would be able to pare off the no. plate , preferably avoiding fingers , but the Graeme King door should fit fine if you prefer . Let me know if you buy one & which one you decide to do & I'll check through my photo. collection to let you know any other variations . I have a thing about the Thompson pacifics having seen many of them as a youngster at York & have a large collection of photo's of them . They are a nightmare for minor differences & I'm amazed that Hornby are doing the A.2/2 . Cheers , Ray . 1 Link to comment Share on other sites More sharing options...
landscapes Posted January 27, 2020 Author Share Posted January 27, 2020 2 hours ago, Ray Flintoft said: I am sure you would be able to pare off the no. plate , preferably avoiding fingers , but the Graeme King door should fit fine if you prefer . Let me know if you buy one & which one you decide to do & I'll check through my photo. collection to let you know any other variations . I have a thing about the Thompson pacifics having seen many of them as a youngster at York & have a large collection of photo's of them . They are a nightmare for minor differences & I'm amazed that Hornby are doing the A.2/2 . Cheers , Ray . Hi Ray Thats very kind of you to offer, which I will gladly take up as and when the A2/2 Pacific's become available from Hornby. Thats a great idea regarding Graeme's smokebox doors and coincidentally I recently purchased two from him to detail up for my two Bachmann A2/3 conversions but never got around to fitting them, I will hold on now until Hornby release the A2/2's as they may come in handy. Many thanks again for your help. Regards David Link to comment Share on other sites More sharing options...
Ray Flintoft Posted February 6, 2020 Share Posted February 6, 2020 Hi David , I have replied to your e-mail but I'm not sure that it has gone through to you. If you let me know I will have another go . My computer skills make Tony Wright look like an I.T. specialist ! Cheers , Ray . Link to comment Share on other sites More sharing options...
landscapes Posted February 6, 2020 Author Share Posted February 6, 2020 Hi Ray Sorry but it did not go through, love the last comment lets hope Tony doesn't read Haymarket 64B too often. Regards David Link to comment Share on other sites More sharing options...
landscapes Posted February 11, 2020 Author Share Posted February 11, 2020 (edited) Good Evening Two photos taken tonight of A4 60012 Commonwealth of Australia at slightly different angles along with other Haymarket Pacific's, 60012 is ready to take the Elizabethan Express South. A bit more progress today, there are two lines running West in front of the coaling tower that form the two road coal sidings, these two lines were laid on a steep incline and stored coal wagons designated to replenish the coal tower. There is only a short section of about 250mm in length at the beginning of the incline constructed so far as most of the coal sidings are located on the next two layout boards yet to be constructed, this will be phase two of the project as and when I have the space to increase the layouts size Photos to follow. Regards David Edited February 11, 2020 by landscapes spelling 10 Link to comment Share on other sites More sharing options...
landscapes Posted February 12, 2020 Author Share Posted February 12, 2020 (edited) Evening Following my last post I have managed to photograph with great difficulty due to a lack of space the start of the coal wagon incline, this also give an idea of what the rear of the main shed building looks like and some of the smaller outbuilding to the rear of the layout. A view I don't think I have shown before. Also enclosed is a sketch indicating the overall size and rise of the two coal wagon storage roads this information is all taken from reference photos of the MPD in steam days, lucky for me I have a photo of Haymarket's J83's standing next to the end of the incline so I can get a good idea on how high it was, all dimensions are in millimetres. Regards David Edited February 12, 2020 by landscapes Spelling 11 Link to comment Share on other sites More sharing options...
landscapes Posted February 19, 2020 Author Share Posted February 19, 2020 (edited) Hi I said earlier that my Hornby A4 60004 William Whitelaw had the wrong tender so I have changed the identity to 60028 Walter K Whigham which now has the correct tender fitted. 60028 was a regular on the Elizabethan and also the very first LNER Pacific I saw back in late 1962 just before it was withdrawn so I was very lucky to see it. Loco has been weathered except loco wheels and rods still to do. Regards David Edited February 19, 2020 by landscapes additional information 14 Link to comment Share on other sites More sharing options...
millerhillboy Posted February 20, 2020 Share Posted February 20, 2020 lovely lineup of thoroughbred machines 1 Link to comment Share on other sites More sharing options...
landscapes Posted February 20, 2020 Author Share Posted February 20, 2020 Hi Thank you, I totally agree with you some lovely examples of Gresley and Thompson Pacific's. Regards David Link to comment Share on other sites More sharing options...
landscapes Posted February 21, 2020 Author Share Posted February 21, 2020 Good Evening Garden chores done, car washed and wife out meeting a friend for lunch, so time for some railway modelling. So I managed to finish off the weathering of the wheels, motion and chassis to newly renamed A4 60028 Walter K Whigham and here she is looking splendid on No 2 Road complete with the Queen of Scots Headboard waiting for a path to Waverley and then South to KX. Regards David 12 Link to comment Share on other sites More sharing options...
landscapes Posted March 17, 2020 Author Share Posted March 17, 2020 Good evening i have just arrived back home after 3 weeks in Spain. from 11.00pm on Saturday just gone every bar, restaurant, shops and sports facilities was closed down. then on Monday morning the whole country went into total lockdown. For anyone not familiar with this you cannot leave your house for any reason other than a visit to either local supermarkets or Pharmacies there are police checks and you have to show proof of purchases to prove you only went out for provisions or it’s an instant fine if caught. If you do venture out you can only go alone two people walking together and you get an instant fine from the local police, same if you are driving a car only one person per car, we heard fines of 600 Euros was handed out for this but they were only rumours. streets totally empty of people and cars very strange end of the world feeling. By shear luck we were able to get seats on one of the few flights out of Murcia International Airport today. Very very happy and lucky to be home and hopefully now back into some railway modelling. To everyone take care and stay safe Regards David 9 Link to comment Share on other sites More sharing options...
RMweb Premium great northern Posted March 18, 2020 RMweb Premium Share Posted March 18, 2020 12 hours ago, landscapes said: Good evening i have just arrived back home after 3 weeks in Spain. from 11.00pm on Saturday just gone every bar, restaurant, shops and sports facilities was closed down. then on Monday morning the whole country went into total lockdown. For anyone not familiar with this you cannot leave your house for any reason other than a visit to either local supermarkets or Pharmacies there are police checks and you have to show proof of purchases to prove you only went out for provisions or it’s an instant fine if caught. If you do venture out you can only go alone two people walking together and you get an instant fine from the local police, same if you are driving a car only one person per car, we heard fines of 600 Euros was handed out for this but they were only rumours. streets totally empty of people and cars very strange end of the world feeling. By shear luck we were able to get seats on one of the few flights out of Murcia International Airport today. Very very happy and lucky to be home and hopefully now back into some railway modelling. To everyone take care and stay safe Regards David Really good news David. It can be bad enough here, but being locked down abroad must be really nasty. Link to comment Share on other sites More sharing options...
landscapes Posted March 18, 2020 Author Share Posted March 18, 2020 46 minutes ago, great northern said: Really good news David. It can be bad enough here, but being locked down abroad must be really nasty. Hi Gilbert Yes it really is you have no control over what you would normally do and take for granted. My sister has lived in Spain for the last 17 years and under the total lockdown we could not visit her nor could she visit us, you are virtually a prisoner in your own home. In times like this it’s so important to have hobbies or interests you can do such as our hobby of model railways and even communicating with friends on RMweb is important as well. i do not want to be a prophet of doom but we may face a similar situation here in the UK in due course but hopefully not as draconian as the laws in Spain. I have just been told I must self isolate for 7 days as we have traveled back from a highly affected country and traveled through airports but lucky for me I have plenty to get in with and my wife has a very long list of jobs she wants doing. Thanks for your reply, stay well and safe. Regards David 3 Link to comment Share on other sites More sharing options...
landscapes Posted March 20, 2020 Author Share Posted March 20, 2020 Hi Back to model railway photography tonight, trying out new settings on the camera and a fairly new locomotive but not sure if I have shown this one on the thread. Regards David 15 Link to comment Share on other sites More sharing options...
landscapes Posted March 24, 2020 Author Share Posted March 24, 2020 (edited) Good Evening Following a recent discussion on Tony Wright's Little Bytham thread regarding model railway photography I thought I would have a go at positioning the camera on the layout board itself to get a more close up image of the locomotives outside the main running shed. I am quite happy with the initial composition but not so keen on the photo quality, this is my first attempt and I have ordered a shutter release cable for the camera. So I am hoping that once I use the shutter cable the results hopefully will improve. These are both Hornby RTR A4’s but I did remove the single plastic chimney that came with 60012 and replaced it with a white metal one, if you look closely you can see a slightly different profile. Regards David Edited March 24, 2020 by landscapes Additional Information 9 Link to comment Share on other sites More sharing options...
RMweb Premium 31A Posted March 24, 2020 RMweb Premium Share Posted March 24, 2020 I very often take pictures of my models by putting the camera down on the baseboard; it seems to be almost an eye level view. I haven't got a shutter release cable but I find the self timer facility quite useful - my camera has a 20 seconds setting which gives you just long enough to get the camera in position, but then the shutter fires without you having to touch the camera, so avoiding camera shake. I like the A4s with double chimney, it makes them look more 'purposeful' somehow. You've fitted the new chimney very neatly! 1 Link to comment Share on other sites More sharing options...
landscapes Posted March 24, 2020 Author Share Posted March 24, 2020 1 hour ago, 31A said: I very often take pictures of my models by putting the camera down on the baseboard; it seems to be almost an eye level view. I haven't got a shutter release cable but I find the self timer facility quite useful - my camera has a 20 seconds setting which gives you just long enough to get the camera in position, but then the shutter fires without you having to touch the camera, so avoiding camera shake. I like the A4s with double chimney, it makes them look more 'purposeful' somehow. You've fitted the new chimney very neatly! Hi 31A thank you for your reply and kind comments it’s the first time I have taken a photo at a low level angle and I do like the results so far and as I now have plenty of time I will try a few more photos with slightly different angles and locomotives. I did use the self timer when taking this photo and I have been informed my Shutter release cable has been posted that should help as well. The White metal double chimney for the A4 did take quite a bit of filing down but once I got the profile correct it fitted perfectly. Regards David 1 Link to comment Share on other sites More sharing options...
RMweb Premium 31A Posted March 24, 2020 RMweb Premium Share Posted March 24, 2020 3 hours ago, landscapes said: The White metal double chimney for the A4 did take quite a bit of filing down but once I got the profile correct it fitted perfectly. I've got a similar conversion I want to do to a Hornby 60025 'Falcon', I got a double chimney from (I think) 247 Developments a long time ago and also some red-backed nameplates which this loco carried at one time and I thought would be something different. But then I found out it had a different tender by the time it got a double chimney, so there the project has stalled so far .... Link to comment Share on other sites More sharing options...
landscapes Posted March 24, 2020 Author Share Posted March 24, 2020 Hi I had a similar situation when I renamed and numbered one of my Hornby A4’s into 60004 William Whitelaw (a Haymarket locomotive) only to find it had the wrong tender so I renamed and renumbered it again to 60028 Walter K Whigham which coincidentally was the very first LNER Pacific I saw back in 1962, also it now had the correct tender and I took the opportunity to weather it as well. Its one of the two A4’s in my last photo I inserted on this thread. Are you going to carry out another identity change to your A4? Regards David Link to comment Share on other sites More sharing options...
davidw Posted March 24, 2020 Share Posted March 24, 2020 2 hours ago, 31A said: I've got a similar conversion I want to do to a Hornby 60025 'Falcon', I got a double chimney from (I think) 247 Developments a long time ago and also some red-backed nameplates which this loco carried at one time and I thought would be something different. But then I found out it had a different tender by the time it got a double chimney, so there the project has stalled so far .... 1 hour ago, landscapes said: Hi I had a similar situation when I renamed and numbered one of my Hornby A4’s into 60004 William Whitelaw (a Haymarket locomotive) only to find it had the wrong tender so I renamed and renumbered it again to 60028 Walter K Whigham which coincidentally was the very first LNER Pacific I saw back in 1962, also it now had the correct tender and I took the opportunity to weather it as well. Its one of the two A4’s in my last photo I inserted on this thread. Are you going to carry out another identity change to your A4? Regards David You'd do far better with a Graeme King resin chimney. Far crisper than a white metal version. I've done this with half a dozen for myself and others its a perfect fit 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now