RMweb Gold adb968008 Posted December 27, 2022 RMweb Gold Share Posted December 27, 2022 1 hour ago, 298 said: But is it? Considering Bachmann had them at £179 with the specialist chip for free, £130-something means they're only loosing the retailer's markup. Are they? Back in the day when Hornby 90s were 2 for £30 and Shawplan had the paint and transfers it didn't take me long to complete the set. There wasn't a question that I could only have one or two. The Belgian one was my favourite livery but certainly rarer on passenger and sleeper workings, certainly compared to 90029. 90136 would be a good choice because of its use with Anglia and prior to it's repaint into Red it was one of the longest lived liveries still in use, albeit with a few minor variations. In all my years watching, I never saw more than 1 in a day. Never saw the 4 together (don’t forget the British one). So to have all four on your layout at the same time … SNCB was my favourite as it stood out. DB next. The sybic one was a little dull and the BR one never looked right (because it was different to the rest). 1 Link to comment Share on other sites More sharing options...
TomScrut Posted December 27, 2022 Share Posted December 27, 2022 10 hours ago, 298 said: But is it? Considering Bachmann had them at £179 with the specialist chip for free, £130-something means they're only loosing the retailer's markup. Well, they have gone from having what I presume is a very large markup (over RRP, no retailer to take a cut) to having a price that is way below RRP of the original release and then also bringing in a cut for the retailer? Look at the 9F. Was £170 at the BCC, now £113 at TMC. So Bachmann have gone from wanting £170 for it to selling it to TMC for less than £100 as a guess. 2 Link to comment Share on other sites More sharing options...
298 Posted December 27, 2022 Share Posted December 27, 2022 9 hours ago, adb968008 said: In all my years watching, I never saw more than 1 in a day. Never saw the 4 together (don’t forget the British one). So to have all four on your layout at the same time … SNCB was my favourite as it stood out. DB next. The sybic one was a little dull and the BR one never looked right (because it was different to the rest). There was at least six occasions when the 3 or 4 were reunited, such as Crewe open days or for a trade event at Trafford Park. 1 1 Link to comment Share on other sites More sharing options...
RMweb Gold Patriot87003 Posted December 27, 2022 RMweb Gold Share Posted December 27, 2022 2 hours ago, 298 said: There was at least six occasions when the 3 or 4 were reunited, such as Crewe open days or for a trade event at Trafford Park. Agree … one such occasion being the Crewe Basford Hall open day during 21st August 1994. I just about managed to catch the three of them together … 3 Link to comment Share on other sites More sharing options...
Pete the Elaner Posted December 27, 2022 Share Posted December 27, 2022 15 hours ago, 298 said: 90136 would be a good choice because of its use with Anglia and prior to it's repaint into Red it was one of the longest lived liveries still in use, albeit with a few minor variations. I remember seeing it regularly on the sleepers in its last few years in Sybic as 90036. The yellow roof had faded a lot. I could not tell what livery it was. The Railfreight Distribution decals on the side had faded from red to yellow. The red of the sector markings had faded almost completely, then they got covered with an EWS logo. It was still one of my favourite liveries though. Link to comment Share on other sites More sharing options...
cairnsroadworks Posted December 27, 2022 Share Posted December 27, 2022 90136 and 90130 are both in the works here. Link to comment Share on other sites More sharing options...
cairnsroadworks Posted December 27, 2022 Share Posted December 27, 2022 9 hours ago, TomScrut said: Well, they have gone from having what I presume is a very large markup (over RRP, no retailer to take a cut) to having a price that is way below RRP of the original release and then also bringing in a cut for the retailer? Look at the 9F. Was £170 at the BCC, now £113 at TMC. So Bachmann have gone from wanting £170 for it to selling it to TMC for less than £100 as a guess. They didn’t last long at TMC at that price! 1 Link to comment Share on other sites More sharing options...
RMweb Premium Ncarter2 Posted December 27, 2022 RMweb Premium Share Posted December 27, 2022 18 minutes ago, cairnsroadworks said: 90136 and 90130 are both in the works here. May need to get a 90136! Link to comment Share on other sites More sharing options...
RMweb Gold adb968008 Posted December 27, 2022 RMweb Gold Share Posted December 27, 2022 8 hours ago, 298 said: There was at least six occasions when the 3 or 4 were reunited, such as Crewe open days or for a trade event at Trafford Park. Ive not seen too many layouts that model an openday though. Link to comment Share on other sites More sharing options...
TH47541 Posted January 8, 2023 Share Posted January 8, 2023 I have been thinking about picking up a RES Class 90 as it looks great. I had trouble with the bogies on the initial Class 90 in RFD livery which had to be sent back. Does the new releases suffer from such problems too or have Bachmann fixed this? Thanks for any help in influencing the opening of my wallet. 1 Link to comment Share on other sites More sharing options...
ThaneofFife Posted January 8, 2023 Share Posted January 8, 2023 Is the pan assembly available as a,spare? How much are they if anybody knows? Link to comment Share on other sites More sharing options...
RMweb Gold 97406 Posted January 8, 2023 RMweb Gold Share Posted January 8, 2023 (edited) 29 minutes ago, ThaneofFife said: Is the pan assembly available as a,spare? How much are they if anybody knows? Contact their customer services as I recall they did have some spares taken off returned 90s. If you’re just after a Brecknell Willis pantograph for a different loco, then there’s still a few Heljan ones available from Gaugemaster. Weaken the spring if you have OHLE. https://www.gaugemasterretail.com/magento/Heljan-hn19850013.html The Bachmann one is the best at the moment, though.. Edited January 8, 2023 by 97406 1 1 Link to comment Share on other sites More sharing options...
RMweb Gold Patriot87003 Posted January 8, 2023 RMweb Gold Share Posted January 8, 2023 50 minutes ago, TH47541 said: I have been thinking about picking up a RES Class 90 as it looks great. I had trouble with the bogies on the initial Class 90 in RFD livery which had to be sent back. Does the new releases suffer from such problems too or have Bachmann fixed this? Thanks for any help in influencing the opening of my wallet. Go for it! I’ve not had any problems with any of the Class 90’s that I’ve bought and the RES livery does look good on a 90. I understand some loco’s in batch 1 had the bogie retaining screws over tightened and were prone to some damage during transit if bounced about, but subsequent batches haven’t had this issue. The real 90019 at King’s Cross before hauling a tour north during 12th July 1992 90019 again hauling a decent length parcels train through Stafford during 14th July 1994 7 Link to comment Share on other sites More sharing options...
RMweb Gold Markwj Posted January 8, 2023 RMweb Gold Share Posted January 8, 2023 1 hour ago, TH47541 said: I have been thinking about picking up a RES Class 90 as it looks great. I had trouble with the bogies on the initial Class 90 in RFD livery which had to be sent back. Does the new releases suffer from such problems too or have Bachmann fixed this? Thanks for any help in influencing the opening of my wallet. I have had 2 locos from the subsequent batches (including the res one) with no issues with the bogies at all. Also I haven’t read any reports on here or elsewhere regarding bogie issues so I suspect you will be fine. cheers mark 2 Link to comment Share on other sites More sharing options...
RMweb Gold adb968008 Posted January 8, 2023 RMweb Gold Share Posted January 8, 2023 (edited) 4 hours ago, ThaneofFife said: Is the pan assembly available as a,spare? How much are they if anybody knows? I bought several from Bachmann, £15 a go. i had to call though. if your not fitting them to a Bachmann 90, you need to trim off the “tail” that goes to the servo in the body. They do however fit a lot of locos straight out.. Trix 81, Hornby 86/87/90, Heljan 86. They also fit the old (but not new) Hornby 91. Edited January 8, 2023 by adb968008 1 1 Link to comment Share on other sites More sharing options...
Going2theDogs Posted January 8, 2023 Share Posted January 8, 2023 6 hours ago, TH47541 said: I have been thinking about picking up a RES Class 90 as it looks great. I had trouble with the bogies on the initial Class 90 in RFD livery which had to be sent back. Does the new releases suffer from such problems too or have Bachmann fixed this? Thanks for any help in influencing the opening of my wallet. Hi All, I have the sound fitted class 90 in RES livery & have to say it is absolutely superb. My loco has been subtly weathered to tone down the bright paintwork. I would strongly recommend this loco & would suggest to shop around as there as some good deals about from the likes of TMC etc. 9 Link to comment Share on other sites More sharing options...
TH47541 Posted January 9, 2023 Share Posted January 9, 2023 Thank you gentlemen, that is most reassuring. It was all that was holding me back. Vouchers make the purchase possible so will be invested wisely! 2 Link to comment Share on other sites More sharing options...
Squirrel Rail Posted January 22, 2023 Share Posted January 22, 2023 Finished my Anglia 90, took a while but got there, the etched horn grills I had made a couple of years ago worked absolutely fine!! side view: other side…. and the revised front end; 11 2 2 Link to comment Share on other sites More sharing options...
WCML100 Posted January 22, 2023 Share Posted January 22, 2023 (edited) Duplicate post Edited January 22, 2023 by WCML100 Link to comment Share on other sites More sharing options...
WCML100 Posted January 22, 2023 Share Posted January 22, 2023 1 hour ago, Squirrel Rail said: Finished my Anglia 90, took a while but got there, the etched horn grills I had made a couple of years ago worked absolutely fine!! side view: other side…. and the revised front end; That looks cracking mate! 1 1 1 Link to comment Share on other sites More sharing options...
letterspider Posted January 23, 2023 Share Posted January 23, 2023 Great work, especially like the Cargowaggons. Link to comment Share on other sites More sharing options...
RMweb Gold 97406 Posted January 23, 2023 RMweb Gold Share Posted January 23, 2023 Going back to the Freightconnection class 90s, I’ve been trying to find some shots of them from the original exhibition before they got full yellow ends. So far I’ve found just this one from Rail Magazine. The Belgian one looked especially cool to these eyes, so will keep looking. 3 Link to comment Share on other sites More sharing options...
cairnsroadworks Posted January 23, 2023 Share Posted January 23, 2023 11 hours ago, Squirrel Rail said: Finished my Anglia 90, took a while but got there, the etched horn grills I had made a couple of years ago worked absolutely fine!! side view: other side…. and the revised front end; Very tasty! Have you any spare horn grilles perchance?! Link to comment Share on other sites More sharing options...
298 Posted January 24, 2023 Share Posted January 24, 2023 (edited) On 23/01/2023 at 08:39, 97406 said: Going back to the Freightconnection class 90s, I’ve been trying to find some shots of them from the original exhibition before they got full yellow ends. So far I’ve found just this one from Rail Magazine. The Belgian one looked especially cool to these eyes, so will keep looking. I did have a clipping from Railway Magazine showing the unveiling at a weed-strewn Crewe Electric, but can't find it at the moment. Considering they didn't leave CE without yellow ends, those photos are rarer a red 90129 with yellow ends before the DB chevron was applied... https://flic.kr/p/aoFSPw Edited January 24, 2023 by 298 Link edited 1 Link to comment Share on other sites More sharing options...
Benjamin Brady Posted January 24, 2023 Share Posted January 24, 2023 I have a photo of all three on the ETD before the yellow ends were painted, now it is going to be a mission to go and find them. I always though 028 looked good with the full Belgium ends Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now