Tullis Russell PAA using Hornby PGA and Silhouette Portait Cutter

[jonhall]

[MJI]

Very nice

 

I wouldn't mind doing a couple myself, didn't they run with the Tigerclays?

[jonhall]

I still have a couple of sets of parts £20 for 4 wagons worth. PM for details

 

Jon

[Rivercider]

1 hour ago, MJI said:

Very nice

 

I wouldn't mind doing a couple myself, didn't they run with the Tigerclays?

Although they did not go with the clay tigers on the service from St Bazey to Cliffe Vale they 

did run together on local trips from Goonbarrow to St Blazey, then onwards on Speedlink Network services via Mossend to Markinch. They often ran singly or in twos and threes mixed up with other clay carriers and other air braked stock.

 

There are a couple behind 45034 here at Exeter St Davids on a Speedlink service for Tavistock Junction and St Blazey. 9/7/85

 

Here at St Blazey I think yard pilot 08488 is shunting on the weighbridge road, 7/11/83.

 

cheers

 

[MJI]

I saw them 81 to 83 at Plymouth, I need to check notes on which actual ones, pretty sure a 37 normally

 

I do remember seeing a Peak with it brakes on getting dragged by a 50 once, really pulled the coupling.

[MJI]

1 hour ago, jonhall said:

I still have a couple of sets of parts £20 for 4 wagons worth. PM for details

 

Jon

 

What years are they suitable for?

[hmrspaul]

On 02/07/2022 at 17:15, MJI said:

 

What years are they suitable for?

 

https://paulbartlett.zenfolio.com/tullisrussellpaa All photos dated. They are very noticeable in many train photos taken along the WCML

 

Paul

[jonhall]

 I finally sourced some transfers from Precision decals, so letting has started, I didn't quite get the number series right so it looks like I might have two TSL12800's, and no 12807, but I then started building a further batch, so in fact I'm quite likely to end up with several multiples, some of which will be sold

 

Jon

 

 

 

 

 

 

[aasmall]

Nice work Jon, are the decals generally available. Precisions website seems to be down at the moment to allow me to check.

 

thanks,

 

Andy 

[jonhall]

I didn't see them on the website, but emailed John and he sent me an e-form, where I could request the numbers that I wanted, and they were printed to order.

 

Jon

[aasmall]

Thanks Jon.

 

[aasmall]

Just to say the decals arrived today, very quick service and very nice! Need to crack on and finish one now.

[Marcoblanco]

On 02/07/2022 at 16:10, jonhall said:

I still have a couple of sets of parts £20 for 4 wagons worth. PM for details

 

Jon

Any parts left jon? Regards Mark 

[jonhall]

It looks like I have several sheets of 40thou middle spacers but no 20thou outer skins - since the middles are just plastic waste without the outers I'd be prepared to dust off the cutter and run off a sheet or two so that the middles go to someone who can use them, but it might be a few days.

 

PM if interested (and if anyone else might want to jump on whilst I get the cutter out).

 

Thanks

 

jon

[Wolf27]

I have made up a couple, with the other pair imminent. Very easy to put together, still need to add the additional details.