Clearwater Posted May 3, 2015 Share Posted May 3, 2015 Hi Any tips on the best / most effective track cleaning systems? Are those ones built into wagons effective? Many thanks in advance! Link to comment Share on other sites More sharing options...
HLT 0109 Posted May 3, 2015 Share Posted May 3, 2015 There have been many exchanges on this topic on this website and many differing opinions expressed. The problem with most wagon-based systems is that they are too light to remove anything but the lightest of dirt. In my opinion the best system is the CMX machine which is a weighty, brass tank wagon but it is rather expensive. It is available in N, 00 and 0 gauge. If all your track is easily accessible, the best method is probably a rag soaked in isopropyl alcohol (IPA) but, I find the CMX machine very successful with IPA. The problem with a finger in an IPA soaked rag is that it will freeze your finger! Harold. 1 Link to comment Share on other sites More sharing options...
Clearwater Posted May 3, 2015 Author Share Posted May 3, 2015 Thanks! Much appreciated Link to comment Share on other sites More sharing options...
jukebox Posted May 4, 2015 Share Posted May 4, 2015 I'd encourage you to do a site search for CMX. Like Harold, I, too am a convert. I use Cellulose Thinners in mine, but many other avoid this because of it's carcinogenic risks. It isn't a cheap device, and needs a serious loco to haul/propel it, but it does what it says on the pack, in places you might never reach properly yourself. 1 Link to comment Share on other sites More sharing options...
Mike Storey Posted May 4, 2015 Share Posted May 4, 2015 I have a Dapol track cleaner and it works pretty well using the soft pads plus IPA, and the grinding pads are effective but don't last very long. It also has a vacuum, which the CMX does not have, and this is really handy for inaccessible areas. However, most reviews say the CMX is the best (primarily because it is much heavier), but you will pay around £120 for it, whereas the Dapol can be had for around £60. Link to comment Share on other sites More sharing options...
RMweb Premium BR60103 Posted May 4, 2015 RMweb Premium Share Posted May 4, 2015 I use a Centerline track cleaning car which is common in North America. I use Aero fluid in it. The car is a metal frame with a knurled brass roller in it. A strip of J-cloth is wrapped around the roller and soaked in fluid, then the car is hauled around the layout. Mine develops a pair of black streaks. Some guys, richer than me, follow it with a dry car. I've also used the Woodland Scenics kit which is a manual operation. Link to comment Share on other sites More sharing options...
Anthony566 Posted May 4, 2015 Share Posted May 4, 2015 I have a CMX and while it was expensive it is extremely effective and IMO worth the money. 1 Link to comment Share on other sites More sharing options...
broadbent Posted May 4, 2015 Share Posted May 4, 2015 I also clean by hand, but I read somewhere on using just using a smear of automatic gearbox fluid and running a train around the track to spread it. It seems to work. Link to comment Share on other sites More sharing options...
edcayton Posted May 4, 2015 Share Posted May 4, 2015 What about the likes of Relco if you are not dcc. Ed Link to comment Share on other sites More sharing options...
GDR Posted February 6, 2021 Share Posted February 6, 2021 On 03/05/2015 at 21:31, HLT 0109 said: There have been many exchanges on this topic on this website and many differing opinions expressed. The problem with most wagon-based systems is that they are too light to remove anything but the lightest of dirt. In my opinion the best system is the CMX machine which is a weighty, brass tank wagon but it is rather expensive. It is available in N, 00 and 0 gauge. If all your track is easily accessible, the best method is probably a rag soaked in isopropyl alcohol (IPA) but, I find the CMX machine very successful with IPA. The problem with a finger in an IPA soaked rag is that it will freeze your finger! Harold. (7 yrs pass....) Isopropanol/IPA is excellent, also good for guitar strings btw. And now we've all got access to disposable gloves no more finger-freeze! However you can use this stuff for solder burns or scalpel nicks. Link to comment Share on other sites More sharing options...
Chrisr40 Posted February 6, 2021 Share Posted February 6, 2021 Recently purchased the ten commandments track cleaner. Very impressed with its cleaning ability. 1 1 Link to comment Share on other sites More sharing options...
Andymsa Posted February 6, 2021 Share Posted February 6, 2021 (edited) 2 hours ago, Chrisr40 said: Recently purchased the ten commandments track cleaner. Very impressed with its cleaning ability. I have 5 of these and yes they are very good, I got mine from the German manufacturer direct. Now the tip get some double side tape and from Tesco’s get the yellow cleaning cloths (they were a £1 for a pack of 3) to replace the felt pads. The Tesco ones are exactly the same apart from colour, also available in the Aldi Sud in Germany. Just one trip around the layout and they need changing. Also the manufacturer does replacement NEM coupling sockets made from a printer. Certain Marklin wagon bodies fit these aswell to hind the starkness of it. Edited February 6, 2021 by Andymsa 1 1 Link to comment Share on other sites More sharing options...
pH Posted February 6, 2021 Share Posted February 6, 2021 An interesting solution for North American layouts: https://mrr.trains.com/news-reviews/staff-reviews/2006/08/jam-solutions-ho-stealth-track-cleaners Link to comment Share on other sites More sharing options...
Ray Von Posted February 6, 2021 Share Posted February 6, 2021 (edited) 4 hours ago, Chrisr40 said: Recently purchased the ten commandments track cleaner. Very impressed with its cleaning ability. Just googling for the N gauge equivalent! *Edit: Bosh! £40 direct from Ten Commandments, update to follow.... Edited February 6, 2021 by Ray Von Link to comment Share on other sites More sharing options...
Ron Ron Ron Posted February 6, 2021 Share Posted February 6, 2021 2 hours ago, pH said: An interesting solution for North American layouts: https://mrr.trains.com/news-reviews/staff-reviews/2006/08/jam-solutions-ho-stealth-track-cleaners Mmmmm? Another solution that relies on abrasive pads. The wisest and most revered wizards of our sacred arts, would countenance against any form of cleaning that involves abrasive techniques. Just buy the CMX, or anything that works in a similar fashion. . 1 1 Link to comment Share on other sites More sharing options...
Ray Von Posted February 6, 2021 Share Posted February 6, 2021 46 minutes ago, Ron Ron Ron said: Mmmmm? Another solution that relies on abrasive pads. The wisest and most revered wizards of our sacred arts, would countenance against any form of cleaning that involves abrasive techniques. Just buy the CMX, or anything that works in a similar fashion. . I've used a very fine and ancient emery board in the past, it came in a Xmas Cracker - it always seems to clear the track nicely but I do have that nagging feeling that I ought not be using it.... Link to comment Share on other sites More sharing options...
RMweb Premium Crepello Posted February 7, 2021 RMweb Premium Share Posted February 7, 2021 The Woodland Scenics manual system mentioned above (Tidy Track) is excellent; both the hand tool and the handle are well-designed. I use the pads dipped in IPA. 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now