Enanjay Posted May 13, 2015 Share Posted May 13, 2015 I'm considering Tillig for my next project ( likely to be based somewhere on LSWR main line in OO). Does anyone know of shops in the West Country that stock Tillig track ? I just want to take a look and see what it's like for myself. I've used Peco code 75 for the past few years and although I can get a reasonable level of realism with that, I think I can do better elsewhere. Nick Link to comment Share on other sites More sharing options...
HSB Posted May 13, 2015 Share Posted May 13, 2015 It's available by mail order from International Models but I don't think anybody else stocks it in the UK. They attend some exhibitions. Link to comment Share on other sites More sharing options...
Ron Ron Ron Posted May 13, 2015 Share Posted May 13, 2015 There are now a few more Tillig Elite track stockists than there were only just a couple of years ago, when it was basically International Models and just two others. Hattons now stock Tillig Elite and down in the west country, I see Kernow Model Rail Centre are listing the range. . Link to comment Share on other sites More sharing options...
bgman Posted May 13, 2015 Share Posted May 13, 2015 IMHO having used International Models I had to wait for some considerable time, but with Kernow Models I had a much better experience. Just thought it was worth mentioning. Link to comment Share on other sites More sharing options...
Ron Ron Ron Posted May 13, 2015 Share Posted May 13, 2015 IMHO having used International Models I had to wait for some considerable time, but with Kernow Models I had a much better experience. Just thought it was worth mentioning. I believe International Models changed hands a few years ago and the business moved to Scotland under new ownership. Prior to that, service was very good, but I've no knowledge about the current business. . Link to comment Share on other sites More sharing options...
Enanjay Posted May 13, 2015 Author Share Posted May 13, 2015 Thanks Ron I'll try Kernow (quite fancy a trip by train from Crewkerne to Camborne....) Probably on a Monday - it'll make my heart stand still............ Link to comment Share on other sites More sharing options...
Matt Posted May 13, 2015 Share Posted May 13, 2015 I would support bgmans experience. It all came but quick it wasn't and some stuff I had to wait months for due being out of stock (which wasn't clear when ordered). I used tillig point work for part of my layout then switched back to peco 75 with straight track c&l concrete sleeper flat bottom in both cases. I wasn't overly impressed with tillig tbh - if you do use I would recommend replacing the prewired connections with your own - I didn't and once track was in place they fell off leaving me a messy job to solder replacements in situ... You also have to be careful putting fishplates onto the ends of the rails as the pressure can damage the frog. Looks wise they are a slight improvement on peco but with the additional fiddliness I went back to peco. Hth Matt Link to comment Share on other sites More sharing options...
bgman Posted May 13, 2015 Share Posted May 13, 2015 Thanks Ron I'll try Kernow (quite fancy a trip by train from Crewkerne to Camborne....) Probably on a Monday - it'll make my heart stand still............ Enjoy your trip, especially if you go by rail, it's a lovely journey. The staff at Kernow Models are very helpful. On my last visit I asked for a certain item and they couldn't find it as it was an old item not asked for normally. I gave them my mobile no. and they said they'd have a good look for it. As I was almost at the station I had a call to say they'd found what I'd asked for and would I like it sending on? I turned right around and went back to purchase it. Even though I've been there a few times I'd give them full marks if this had been my first trip. I hope you find what you're looking for, and I must add that you will get a straight and honest answer in my experience. Link to comment Share on other sites More sharing options...
Ron Ron Ron Posted May 13, 2015 Share Posted May 13, 2015 I've no idea what Kernow's stockholding of Tillig Elite is, but if I were you I'd phone ahead of any visit, just to make sure it isn't a wasted journey. Also, before considering using this track, I personally think it essential to obtain the English language edition of the Elite Track catalogue, to get an idea of the range and what sort of turnouts and crossings are available. There is a wide variety, including some that at first glance may look similar to slightly different other ones, until you read the blurb and look at the dimensions and angles involved. Also the range includes turnouts with slightly adjustable curvature. At first glance the offering is not as straightforward as with the more limited Peco range. Reading the brochure will give you a handle on what you might be buying. A couple of other tips. Tilling make 2 ranges of H0 track. The better one is the Elite range. This is the one to get. I'm not aware of anyone in the UK stocking or selling the other range though. If buying through mail order or online, consider ordering online from one of the reputable, UK friendly German model shops. With the Euro to GBP rate at the moment, there are big savings to be made, even more so when discounts and special offers come into play. It's no different than ordering from the other end of the UK, it's all in the EU so no importing involved, VAT already paid and delivery times are generally pretty quick. The best have folk who speak good English if there are any problems. p.s. Sorry, not what UK retailers want to hear. . Link to comment Share on other sites More sharing options...
RMweb Gold Red Fox Posted May 14, 2015 RMweb Gold Share Posted May 14, 2015 I'll try Kernow (quite fancy a trip by train from Crewkerne to Camborne....) Probably on a Monday - it'll make my heart stand still............ Kernow site is showing no stock on every Tillig product I click on though they can order items for you. Link to comment Share on other sites More sharing options...
muddys-blues Posted May 14, 2015 Share Posted May 14, 2015 Dear Enanjay you have a private message from me, look at the red bubble at the top of you RMweb page. Best regards Craig. Link to comment Share on other sites More sharing options...
Enanjay Posted May 15, 2015 Author Share Posted May 15, 2015 Thanks again. HO Elite catalog ordered Link to comment Share on other sites More sharing options...
David C Posted May 15, 2015 Share Posted May 15, 2015 I'm told by a former PW engineer that Tillig points are the most accurate for German track! Practice there is significantly different to that in the UK, most noticeably in the sleepering and in the design of the point blades. Over 'ere, the sleepers are usually laid at right angles to the straight road: over there, the sleepers nearest the crossing/frog are laid at right angles to a line which bisects frog. In other words, if the point angle is 1:8, then the sleepers are laid at an angle of 1:4 - I hope that makes sense! The point blades (or the bits which move) are planed differently - they are effectively L shaped, not flat bottomed. The depth of the blades also varies along their length. Of course, Peco points aren't that prototypical either ..... Hope I haven't confused the issue further more. David C Link to comment Share on other sites More sharing options...
Oakydoke Posted May 16, 2015 Share Posted May 16, 2015 Of course, Peco points aren't that prototypical either ..... They're not prototypical of anything. Link to comment Share on other sites More sharing options...
Ron Ron Ron Posted June 8, 2015 Share Posted June 8, 2015 International Models (the newer version under different ownership and based in Scotland), appears to be closing down, at least in its current form. They are no longer selling Tillig products. . Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.