Guest bri.s Posted May 4, 2015 Share Posted May 4, 2015 Hi guys I though I'd start a workbench on buildings and stuff for my new layout build Cudworth I'll be doing a layout thread sometime soon aswell Here's the first project for it it's the main station building I'll start with the research ,I've looked at books ,pictures and anything else that I can find to so my own drawings for it Getting the dimensions were though counting bricks and educated guessing plus measuring ,similar buildings that are out there ready to plonk Here's a few pictures I basically started with a rough drawing of what was there then with more pictures and info built up as good as I could the detail it took around 4 rounds if drawings to get to the final ones I worked off ,saying that even after I started the build I found inaccuracies so changed them as I go Here's the nearly final drawings First I started with a shell out of thick plasticard ,I have used mount board card before but thought I'd try the plasticard as the shell this time After all the swearing and cutting out the doors and windows I'm happy I used the plasticard instead of the card . I've found that you can tack the sides together with the Mekpak and of you want to undo the sides just add a little more to the joint to undo it ,obviously you can't do that too many times but it gives you a bit of play compared to gluing up card After I'd got the shell I started to clad with brick and styrene ,the styrene to simulate the stone bits It was awkward due to where the stone work is and finishes so instead of being able to clad the whole side in brick I had to add the brick in a piece meal fashion I cut the brick sheet to the right shape then added it to the side I cut the windows out after by cutting down the middle of the window opening through the covering brick then scoring the edges of the brick in the window so I can bend it back for the sides of the window aperture , to help me bend the brick sheet I added a slight bit of mek to soften the plastic so it will bend inwards (if that makes sense) sorry no picture of that I then I added the window frames ,I've made them out of styrene strip ,I've not added glazing I'll add that once it's all done painted and I can add a little glue and slip the glazing into place behind the frames This way of doing the windows was a first to me ,I wanted to avoid frosting on the glazing so thought I'd try this way Here's a few pictures of how it is now There's still plenty to do finish the window and door frames, roof,chimneys , And I've to go and get some more styrene strip to finish the stone work on the carpark side They'll be a lot more buildings to be done ,I've another 3 station buildings for the other platforms ,2 signalboxes .a few bridges , an assortment of PW huts plus a few houses and mabe a gas holder Thanks Brian Link to post Share on other sites More sharing options...
Guest bri.s Posted May 4, 2015 Share Posted May 4, 2015 After all the drawings and things I've found that there's a building plan in The midland record issue 5 ,so going to try and get my hands on that, Hopefully I'm not too far out if it's close I'll be happy and mabe redo the building in the future Thanks Brian Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted May 4, 2015 RMweb Gold Share Posted May 4, 2015 Great thread and some excellent work there Brian, looking forward to lots more!! Cheers, Paul Link to post Share on other sites More sharing options...
Guest bri.s Posted May 4, 2015 Share Posted May 4, 2015 Thanks mate , Here's a little update ,I've been doing the window frames (aswell as swearing at them lol) Thanks Brian Link to post Share on other sites More sharing options...
Guest bri.s Posted May 5, 2015 Share Posted May 5, 2015 Well after getting hold of the station plans I've decided that I got the platform side and ends about right and I'm happy with them but the carpark side was quite off so had to rebuild ,I've cut all the windows out and just waiting to get some more brick sheeting to carry on with this side Also the frames in the of the building I did in my last post were wrong so going to redo them tonight the right style of frames were actually simpler lol Here's the difference in the sides Thanks Brian Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted May 5, 2015 RMweb Gold Share Posted May 5, 2015 Looking good mate Paul Link to post Share on other sites More sharing options...
Guest bri.s Posted May 5, 2015 Share Posted May 5, 2015 Thanks mate ,hopefully I'll get a bit more done tonight Thanks Brian Link to post Share on other sites More sharing options...
Guest bri.s Posted May 6, 2015 Share Posted May 6, 2015 Tonight's update I've cut the the roof support and put it in place once I've built all the chimneys I'll widen the gaps for them in it I've just about built a chimney just need the gobo and pots i might use filla or das clay for the gobo not sure which yet only another five to go lol I've also started to rebuild this end it's much closer to the right dimensions now I'll be going to replenish my brick sheets and get some doors for it tomorrow Thanks Brian Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted May 7, 2015 RMweb Gold Share Posted May 7, 2015 Excellent work there Brian, hard to believe it's 2mm, can't wait to see your track building!! Cheers, Paul Link to post Share on other sites More sharing options...
Guest bri.s Posted May 7, 2015 Share Posted May 7, 2015 Thanks mate ,it's all the same building principles as 00 just fiddler lol I'll be restocking some things today and hopefully and I'll progress some more Once I get the printer working again and get some templates sorted I'll start on attempting track and points I may put my atempts on this thread or start the layout one for it not sure yet Thanks Brian Link to post Share on other sites More sharing options...
Guest bri.s Posted May 7, 2015 Share Posted May 7, 2015 A picture form platform level from last night Noticed the slightly wonky windo frame I'll sort that tonight It's amazing what you see from taking photos from different angles lol Thanks Brian Link to post Share on other sites More sharing options...
freebs Posted May 7, 2015 Share Posted May 7, 2015 Great work so far Brian Link to post Share on other sites More sharing options...
Guest bri.s Posted May 7, 2015 Share Posted May 7, 2015 Thanks Paul and freebs I thought I'd really test myself with this it's the biggest thing I've done ,and I'm sort of figuring it out as I go along ,plenty of failed attempts in the bin lol One tip I do have is if you have a cut on your finger don't get mek pak in it ,it stings lol Here's tonight's progress ,I've added a few doors and nearly finished another chimney Just wondering freebs what do you use for the gobbo (mortor ) that the chimney pots sit on? Thanks Brian Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted May 8, 2015 RMweb Gold Share Posted May 8, 2015 Morning Brian more excellent photos, just to put my pennies worth regarding the mortar I've used a very small amount of das clay for mortar around the chimney on my hut, duno if it'll work in 2mm though. Cheers, Paul Link to post Share on other sites More sharing options...
freebs Posted May 8, 2015 Share Posted May 8, 2015 Hi Brian - you're really going to have to stop standing on your head to take those pics I'll reiterate what Paul said -DAS clay, or, I find that standard household filler also does the job. Link to post Share on other sites More sharing options...
Guest bri.s Posted May 9, 2015 Share Posted May 9, 2015 Thanks guys Are my pictures posting upside down freebs ? When I see them on the phone there the right way up Thanks Brian Link to post Share on other sites More sharing options...
Guest bri.s Posted May 9, 2015 Share Posted May 9, 2015 Just checked on laptop and there upside down but showing right way up on the phone ,so don't know whats happening here .ill contact the mods see what they can do Thanks Brian Link to post Share on other sites More sharing options...
Guest bri.s Posted May 9, 2015 Share Posted May 9, 2015 I'll try again Move made a start on the carpark side of the station building Thanks Brian Link to post Share on other sites More sharing options...
Guest bri.s Posted May 9, 2015 Share Posted May 9, 2015 Well they seem to be ok ,still not sure why some of my pictures are upside down and some are not so I'll check in future and sort them at the time More progress hopefully tonight Thanks Brian Link to post Share on other sites More sharing options...
RMweb Premium PaulCheffus Posted May 9, 2015 RMweb Premium Share Posted May 9, 2015 Well they seem to be ok ,still not sure why some of my pictures are upside down and some are not so I'll check in future and sort them at the time More progress hopefully tonight Thanks Brian Hi Brian I think it's to do with the phone rotating the picture. Someone on the MERG forum had posted their profile picture from a phone and on an iPad it was rotated but on a PC it was fine. They had to modify the photo but I'm not sure what they did to prevent it rotating. All your pictures are showing correctly for me on the iPad in this thread. Cheers Paul Link to post Share on other sites More sharing options...
Guest bri.s Posted May 9, 2015 Share Posted May 9, 2015 Hi Paul Thanks ,it's weird on phone or tablet there all fine but on a laptop some have been posted upside down so no idea lol I find it easier to post photos and videos off my phone so I'll check all my future posts in the laptop if possible in case I get any Rouge pictures Thanks Brian Link to post Share on other sites More sharing options...
RMweb Gold PjKing1 Posted May 9, 2015 RMweb Gold Share Posted May 9, 2015 Seem ok to me mate but I'm on an iPhone or iPad although if they were upside down an it's the weekend I'll blame the beer Cheers, Paul Link to post Share on other sites More sharing options...
Guest bri.s Posted May 9, 2015 Share Posted May 9, 2015 Hopefully it'll sort it's self lol Brian Link to post Share on other sites More sharing options...
Guest bri.s Posted May 9, 2015 Share Posted May 9, 2015 Let's try this one Today's progress Brian's sanity 1 ,windows 1 lol After a bit of swearing I got there in the end only 3 more window frames todo then they're done thank god Thanks Brian Let's try this one Today's progress Brian's sanity 1 ,windows 1 lol After a bit of swearing I got there in the end only 3 more window frames todo then they're done thank god Thanks Brian Link to post Share on other sites More sharing options...
BG John Posted May 9, 2015 Share Posted May 9, 2015 So we now get a choice between pictures from down under, or ones the right way up posted twice! I'm glad I've managed to avoid getting one of these annoying phone things, and post on my laptop with a big screen attached, so I can preview and carefully check everything before I post it!!!!! Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.