terrysoham

Dava, The running issues were resolved by dint of careful use of my multimeter and my magnifier headset to map circuit board. The problem of lights direction not being the same as railcar direction was resolved by reversing the wires leading to CN5. Gaugemaster have asked Heljan on my behalf whether they can supply the connectors (both plug and socket) or what the specification is or where they source them from. Now supplied thank to both companies. All I have to do now is tidy up the wiring and put the body back on! if you have all the bits, would you like some help with reassembly? It seems a shame to let what I have learned go to waste. Kind regards

Does anyone have a Heljan 0 gauge AC railcar? I have had to replace some wiring and the pickups. Now when I run it forwards, the upper LED and the driver’s panel LED illuminates but at the reverse end. And vice versa. None of lower LEDs illuminate. The 21 pin circuit board has micro connectors marked CN1 to CN9. I am trying to map the connections so I can resolve the LED problem. I would like to make contact with anyone who owns one of these models. Thanks Terry Metcalfe

I found these two bits of plastic in the box containing an 0 gauge second hand Heljan railbus. They may well be pieces of scrap. I have looked carefully and I can find nowhere they could have fallen off of.

My wife and I are exhibiting this 009 depiction of, so far as we know, the only logging tramway in East Anglia at Norwich model railway exhibition on 15 April.

I’ll be there making trees!

Here is an annotated OS map of the likely route

Does an N gauge model exist? If not is there anything which looks like it to the layperson ?

Here are the photographs as promised

UPDATE OF UPDATE. INCLUDES MORE INFORMATION AND CORRECTIONS I thought I’d write a bit more about modelling this logging tramway. I set myself some objectives: 1.To build something different using the techniques I learnt from Neely. The layout is, dare I say, not just different, but unique. 2.Follow the ‘keep it simple’ philosophy (KISS). I realised that, following my stroke in early 2019, I couldn’t wait too long to have a working layout. The layout is a simple oval with only two, hand operated, points. The curves are from the Peco Setrack range with some flexitrack. I have not added any droppers , relying on the rail joiners to carry the power. I have not experienced any running problems with the loco as it is fitted with ‘stay alive’ capacitors and, should the lack of droppers result in a problem they can always be added later, 3.To introduce youngsters to the wonderful hobby of railway modelling. I have achieved this by involving my next door neighbour’s 10 year old son. He has helped me build the feeder line from the logging activity to the transshipment point. 4.Make the baseboard of a size and weight that it could be easily transported to any exhibitions. I have done this by using a single sheet of Xtratherm – a lightweight, 50mm thick foam board – about 36” x 42” which fits comfortably in the back of my Honda Jazz. All of the scenery is lightweight, the backscene is thick card, the terrain is formed using scrunched up newspaper as formers covered in a PVA-soaked material – garden fleece, that is used to protect plants from frosts. A plaster/PVA/water mix is then spread thinly on top to stiffen it further. It speeds up the construction by initially drying out the fleece using a hair drier. What would I have done to improve the layout: 1.Glued 6mm ply to the top surface of the Xtratherm. This would have made the laying of the track much easier. By the way, I mustn’t forget to mention my fellow modeller, David Bourne, who has produced all the trees and has been a great source of information about this project. He lives local to the site in Thetford. Photographs will hopefully follow.

2019. I thought I’d write a bit more about modelling this logging tramway which, as far as I know, is unique. I set myself some objectives: 1.To build something different using the techniques I learnt from Neely. 2.Follow the keep it simple philosophy (KISS). Iu 3.To introduce youngsters to the wonderful hobby of railway modelling. I have achieved this by involving my next door neighbour’s 10 year old son. He has helped me build the feeder line from the logging activity to the transshipment point. 4.Make the baseboard of a size and weight that it could be easily transported to any exhibitions. I have done this by using a single sheet of Xtratherm – a lightweight, 50mm thick foam board – about 36” x 42” which fits comfortably in the back of my Honda Jazz. All of the scenery is lightweight, the backscene is thick card, the terrain is formed using scrunched up newspaper as formers covered in a pva soaked material – bought from a local garden centre which gardeners use it to protect plants from frosts. Photographs will hopefully follow.

Thanks

Does anyone know whether a there is body kit available of a Bagnal 0-4-0 saddle tank. I am capable of building a body from a kit and kit bashing it to fit a suitable chassis. Regards