jazz
-
Posts
3,288 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Events
Exhibition Layout Details
Store
Everything posted by jazz
-
Thanks for the wishes Ian. The J35 is very similar to a J36 as you may know. I think Jim's J36 is a much better kit to build. I do enjoy building his kits, simple no fuss kits look good when built.
-
Another slow build. Time it's because my other half on Friday was rushed into Bangor Hospital due to her gallbladder blockage. Looks like she may have to have it removed when they get the track blockage cleared. Anyway she's being looked after well and the ambulance arrived quickly too. Anyway it's onwards with the J35. Took some time to get it all squared up for soldering together. I think that's maybe the worst over with on it.
-
J36
-
A couple of days work to get this far on the chassis. Found some half round wire, so will attempt add that to the tender coal rails. Here's the loco chassis so far.
-
Now we are on with the next kit. This is a Majestic models kit. So far I've just completes the tender. The coal rails were very fragile so one has to be careful not to squeeze them when handling it.
-
Thanks for that comment. I just spend most of my time building these kits. I's something that I really enjoy doing. ( Currently I've exceeded the 500 I've built.) My good lady enjoys railways as much as I do most of our holidays entail a railway involvement.
-
Kevin, I Do not have an answer for that one. Geoff give kits to build that have motors etc in the box. That's why a lot of kits I'm building are getting a bit long in the tooth. Onwards with the Sanspareil K&ESR tank loco. I've no finished my part of the build all except for the safety valves that are missing from the kit. Those will have to be scored by Geoff'. Here it is for now.
-
Hi Kevin. This is a Mashima 1824. I had to cut the shaft right down.
-
Well underway now. Had to make some missing parts along the way. Getting the motor to ft require some chopping away of the backhead. You cannot really see where thankfully.
-
The body is well underway now. Been scratch building missing etches, it's now mainly down to all the cast detailing.
-
Yes. No instructions with a fair amount of etches not knowing where they are supposed to fit. Plus some are actually missing. A challenging kit for me to build.
-
Here we have another old kit from Sanspereil. It comes to me without any instructions just a photo and a line drawing. There is lots of etchings that I have no idea were quite a few of them I've no idea were they are meant to go. I've done the chassis with a few parts left over. The motion brackets are missing. I will wait now until the body is built and see how visible they would be before cobbling a pair of them. The driving wheels are on a cradle to allow them the rock This is it so far.
-
That's the Underhill Class 3 now finished and ready for collection. Not been a particularly easy kit I have to say.
-
Been a bit slow on this one. But got there in the end. All it needs now is a good clean, add motor and pickups and usual paint painting.
-
the Underhill loco is now underway. Got the chassis running very smooth letting it run under its own steam down a slight gradient. So it should run as well powered.
-
A change to the planned next build. Geoff has a change of heart and asked me to build the Underhill Midland/LMS class 3 0-6-0 tender loco (Another kit from way back) Brings back memories from the typical Underhill kits. Here is the tender I stared on Sunday and now onwards with the loco.
-
The 2-6-4 Stanier is now completed ready for Geoff. A bit of head scratching to get if finished. I've just been asked to build a College Models Stanier 2-6-2T with no instructions. So that will arrive early next week putting all the other builds back a while. Hopefully this 2-6-4T will help in that build.
-
looks very nice job.
-
The 2-6-4 is almost finished. The few missing detail parts should arrive tomorrow then is prep time for the primer and motorizing and completing the valve gear
-
The cast chimney is cast with a proper hole that sits over the hole in the smokebox. It would take a mighty long bolt to reach the nut. Not very good at all. I do have two or three methods that will work with a bit of out of sight scratch building.
-
had friends round yesterday and they wanted to go up the Great Orme. Got the bus to the top and decided to walk back down. Oh boy did it rain. Absolutely soaked right through. still we had fun and a very nice (wet) meal in a restaurant at the bottom.🤪 Anyway, done a bit more on the 2-6-4 today. I will have to work out the best way to fasten the body to the front of the chassis. Seems the designer overlooked that important issue.
-
It looks like the post with a photo went walk a bout that the above post was refering to so here it is.
-
Hi Jon. interesting comment. I was not impressed with this particular kit. Being used to having half etches to assist correctly aligning the etchings. Plus complicated instructions trying to work out which way up and round some of them go. The order of assembly is totally opposite to my assembly order. However I've sorted that all out now. The chassis was OK though. by the way, Chowbent took over my Kenscale Kits from way back. (They went together very well)
-
I think I've got my head round the designers way of doing this kit. It's well under way now. Nothing will be done for a couple of days now.
-
After having to make a few alterations to the valve gear and bogie and pony trucks it is now running OK. So it's onwards with the body now.
