CKPR

Reading Vol 2 of the HMRS Journal over a leisurely breakfast before the arrival of the rest of the family from Manchester, I found this charming article from 1957 by Ross Pochin. It's part of a series of pieces about the LNWR's claim to be the Premier Line and he rather cheekily but  convincingly puts forward the M&CR as THE Premier Line - you know that I'm not going to disagree with this assessment !

I'm really taken with this topic as I've always been more concerned with atmosphere than absolute accuracy and I'm more inspired by older models and layouts, especially systems built for operation. To put this into context, most of my modelling is pre-grouping, EM gauge and with a lot of very old fashioned scratchbuilding and having just turned 60, I guess I'm in the last generation of railway modellers who were inspired by Rev. Peter Denny's "Buckingham". I suppose I also remember when the standards of Pendon Museum were cutting edge and something to  aspire to rather than a mandatory blueprint !

Agricultural lime and limestone for sugar beet processing would have been  important imports into agricultural areas along with other fertilisers and seed stock, especially potatoes, with the latter two being among  the last traffic conveyed in the old 12T vans in the 1970s. Also, don't forget about oil coming in for rural factories and processing plants.

It's been built for OO but the wheels are Romfords and there appears to be the necessary clearance for changing the axles to EM.

Staying in Cambrian territory, the Bishops Castle Rly.  originally intended to carry on from Lydham Heath to  Montgomery (or thereabouts) and I think this proposal has previously been discussed as the basis for a model.

The original description sounds very similar to the North Sunderland Rly. that ran from Chathill to Seahouses and which was a an 1898 light railway in all but its legal status.

The next ones will finished in pre-1923 William Baird & Co.   livery, honest.

It's marked down as a repair before entering service and auld Dugald Kirkpatrick, the 60 year old junior wagon painter, has had his weekly pay docked by 2d for his lack of due respect for the company's property.

Well, I managed to finish off the LNWR and NBR wagons on the workbench and I'm going to have a go at completing No. 7 this weekend. But wait, what madness lies on t'other side of said wagons ?! In my defence, I used an unopened PC Models Sheet M13 LMS wagon insignia (methfix), so whilst I may be in the wrong, like the Hitchhikers Guide To The Galaxy, I am definitively in the wrong. The blank side of the NBR wagon is, of course, due to my lack of LNER lettering [forgetting about stash of Slaters NER 20T hopper kits with their ever so useful lettering sheets]

On 18/10/2023 at 11:46, Steamport Southport said:

Someone used to do an etched version of the weighbridge. Can't remember who though....

 

 

 

 

The etched weighbridge produced by Roger Smith is still available http://www.rogersmithmodelrailways.com/4mm_scale_oo_6.html

Currently betwixt an overnight stay in A&E at the start of the week and an out-patient angiogram at the end of the week and determined to finish painting a brace of LNWR opens. I'm also pondering going over to auto couplings, at least in part, and I'm considering Marc D's "Flippems" (I liked the look of Dinghams but these are obviously now unobtainable). Better modellers than me in the CRA have attempted to persuade me of the merits of AJs and I've got the wherewithal in the form of jigs, etc. Alas, the cluttered undersides of my wagon fleet, some of it nearly 40 years old, probably precludes fitting them. 

On 11/10/2023 at 16:15, rob D2 said:

I’m not sure this hobby does much for loneliness.

whilst I’m p*sing about gluing stuff together I could be up the pub taking to real people 

To paraphrase Father Dougal, aren't railway modellers great, eh ? They're so much easier to talk to than real people !

One thought - is the engine pulling the tender as 'dead' weight  or is the tender contributing to the effective weight & tractive effort ? There's a useful discussion of how to arrange the latter with reference to single drivers in Mike Sharman's booklet on compensation, but it essentially comes down to arranging the tender to rest on the engine via the drawbar.

On 06/10/2023 at 13:28, 34theletterbetweenB&D said:

Whoever it may be, their cover is blown.

 

A committee will now be convened to determine the correct editorial position on the matter of railway modelling; with particular reference to the illiberal insistence on arbitrarily derived standards which quash diversity and freedom of expression, which all proper thought rejects unequivocally.

Well...there has been at least one Guardian editorial in praise of railway modelling and which defended our hobby from the yahoo cry of 'boring !', which they defined as encompassing "seemingly everything in life except football and shouting"

I recall an interesting article in Model Railways Seprember 1975 on building large scale NER  locomotives in wood ["Drawing Room Trophies"  by Colin Bullock] - very impressive results and I often wonder what became of the models described as they were all made on commission.

I always wonder what happened to Bill Tate's 'Millport & Selfield' railway in Manchester that also used pre-war LMC O gauge standards and ran using outside third rail pickup.

Ah, but the modern Hornby engine is more 'authentic'...in that it needs an additional banking engine to get over Shap ! 

BBC Assistant producer or a hitherto unknown incarnation of the Doctor ?!

https://youtu.be/tfOG0td7LyE?si=MBTHpfhrB1LL_Ee-

Use a 1:3 meths to water solution for the initial positioning and soaking of  the transfer and then soak off the remaining thin backing paper with plain water. There's no need for any decal softening or setting solutions, but when the transfer has dried and hardened off, a coat of "Kleer" will give a really nice paInted on look and protect the transfer (albeit that properly applied Methfix transfers are pretty well permanent in the first place).

I think that the tank looks like a Panzer IV sized Panzer VI King Tiger...

On 21/06/2023 at 13:33, Morello Cherry said:

Even a through station like Charlbury had an interesting track plan - loading bay + long gas works siding.

 

 

 

One advantage of Charlbury is that you can use the old  Prototype Models GWR range to provide the buildings - you'll can always find them on Ebay or possibly via Freestone Model Accessories. Also, have another look at Yelveton Junction as well as Churston as these are really compact and elegant GWR designs for junction stations.

Definitely Mikes Models lamps.

30 minutes ago, SteamAle said:

Try these: -

https://cspmodels.com/abante/index.php?rt=product/product&manufacturer_id=23&product_id=327

Very nice and I like the look of the LNER lamps...of course, the North Sunderland was known for being a bit lax about the niceties of BoT operating requirements when it came to lamps,  single line working procedures, point locks, etc  !

I've actually been building and refurbishing a rake of the 7 and 8 plank wagons and I would agree that the bodywork is very nicely moulded, it's just the underframes I'm none too impressed with.