Hyper Aus

My data added. Cheers

Well my claim against the company is registered, which only happened yesterday. So I can't see how the statement can be up to date at all.

The statutory protection is with the retailer, and only with Australian retailers. Not sure how it would work with international sales if they are direct with the international seller. I had recently been through the process with an Australian retailer who imported goods from overseas to resell here, and who didn't think they had to honour any warranty at all. They ended up replacing the item before the govt authority (who has no real power anyway) was required to intervene. I was surprised that the card issuer even had a 6 month time limit when all the information I could find only gave 120 days for Australians. Mind you I was only at level 1 support through a company I didn't even expect to do much for me anyway. Due to the nature of crowdfunding and the turn around times for such products, I doubt I will ever go for it again, unless it is through a proper retailer who can refund if nothing comes of it. I have since registered myself as a creditor with the liquidation company. I don't expect to see anything from it and have written off the loss as it isn't worth the stress.

Attempted to garner a charge back with my credit card company. They have a 6 month time limit on all charge backs so I am fat out of luck.

So what does any of this have to do with the King project? If the required numbers had been reached, we would have a newsletter update stating that fact and that it is now moving to tooling.

I'm assuming by the lack of news means the required target still has not been met yet.

A few of those buttons are still hiding until you move your mouse across them: The 'Log In' button for the account log in. The 'Save address' button for when you update / create billing / delivery addresses. Using: Chrome Version 69.0.3497.100 (Official Build) (32-bit)

You register as a student / hobbyist. The download was only ever good for a trial period. I had to register my copy the other day after not using it for some time. It will still be free, you just have to register your account to be using the free subscription.

I read up on it after editing my post. While the 4k panel will make a nice difference in X and Y resolution, Z will always be the issue. Z is limited to the quality of the Z motion and the ability of resin to work at those finer levels.

The biggest problem with LCD Resin 3d printers is the larger you make the print size, the less detailed the part can be. That is until they start offering small 4k DLP screens at a price people can afford. edit: Meant to say LCD over DLP. DLP can happen already if you have the 4k projector.

The following is an extract from the e-mail Dave sent to those who previously expressed interest in the King: So the more that are ordered and paid deposit on, and the sooner that is done, the better. Would hate to see the tooling slot missed out only by a few units. DJM Dave: Any idea on how close we are?

Order placed for 2. Are new accounts being created with orders or is it something you are still working on?

Oh on another note, the password reset e-mail comes from: DJ Models <steve@framedcreative.co.uk> Might want to have that changed as part of the re-write.

Getting this for password reset in Google Chrome and Internet Explorer. @php do_action( 'woocommerce_resetpassword_form' ) ?> {{ __( 'Save', 'woocommerce' ) }} @php wp_nonce_field( 'reset_password' ) ?>

I received the exact same error as YesTor and the results are the same. Password reset form is bugged as well. yes yes I have already forgotten my password.

Thanks for the update Dave. Webstie is looking good. I am awaiting a new credit card which will allow me to have no foreign currency fees which shouldn't be too far away. I'll be pre-ordering the King as soon as it arrives. Jeff

I'm unsure if you can cover an existing face with a pattern but I know you can take an existing pattern and extend it in Fusion 360. Pattern on a path? Maybe this method could be used? http://help.autodesk.com/view/fusion360/ENU/?guid=GUID-101C0598-F00A-46EA-8319-32BDA7483C0B IPA seems to be best purchased off Ebay for Australians: https://www.ebay.com.au/itm/Isopropyl-Alcohol-Pure-100-Artists-Choice-5-Litre-5L-Cleaner-Isopropanol/332666025894?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

Keeping my eyes peeled for the web site update!

From what I have read he is required to have the website / page set up so secure transactions can be performed, which needs to be vetted by the associated bank, and thus requires someone with the knowledge of how to do this. It sounds as though the site/page has been completed on a test site and requires to be transferred to his current site. Even for someone like me who has dabbled in forums and basic pages, payment systems isn't something I have ever dealt with. I wish I could help Dave out but maybe falling back onto a generic order form would be quickest approach the problem at hand, as Dogbox321 has suggested.

My G7 lenses arrived today. I was able to do a test fit but won't have a chance to do a focus and cut until next week. The G7 lens still was loose in the thread with similar amount of wobble when adjusting the focus. Forgot to measure the spring though. I'm thinking the thread used in the laser mount is cut over size. Thread tape won't work as you need to be able to adjust as required and I think it will just cause the tape to fall apart with too much movement.

My model number is ANYCUBIC PHOTON-5.5

Was the seller called Anycubic-offical? I recently purchased one with the previous 5% off and it was Australian based distribution. Purchased on the 21/6 arrived 28/6. Just a warning, the USB stick provided is of very poor quality. Suggest dumping the contents on your PC before anything else. Also join the facebook group "Anycubic Photon Owners DLP Owners"

Well I decided to investigate a bit more and pulled the laser off the gantry. The focusing lens is loose through the entire length of the thread. That little spring does very little to prevent movement. I will wait until I receive the G7 lens and see how it fits. May require a stronger spring or some thread tape.

Well my Emblaser one has arrived and I have been able to build it will little trouble. One thing I did notice is that the focus lens seems to be quite loose. I did purchase and use the 3d printed focusing tool but it was of poor quality and bent far too easily I did manage to do a quick cut of some paper using the jigsaw file from the Darkly Labs website but I won't be able to get much other work done until I have found a home for it in my little workshop at home. Oh and the G7 lens has been ordered. Not looking at upgrading the fan just yet though.

Thanks for the reminders. Do you have a link to a lens on ebay? Only one I seem to find is in America. Just a note I am in Aussie land like yourself