Jump to content
 

Shroomy

Members
  • Posts

    296
  • Joined

  • Last visited

Everything posted by Shroomy

  1. Night owl 4706 Lenz silver 21+ decoder 2 tried Has anybody had any issues with this set up please First one travels on wrong direction which in itself not a problem change cv But also stalls then shoots of in either direction and I have switched of DC running
  2. Has anybody fitted sound if so who does the best sound project for this please
  3. Has anybody had any problems using this I had the result in the pictures after 12 hours not best pleased
  4. Sorry if it's been posted already but as they are being shown on the news a lot at the mo https://railsofsheffield.com/products/10068/Bachmann-31-577-oo-gauge-windhoff-mpv-multi-purpose-master-and-slave-railtrack
  5. Depending on which coach you fit them to they are different lengths so you cut them to length which leaves 1 or 2 LEDs on the stripOn the instructions it says you can use these elsewhere Link to manual About cutting boards to length 1st page on left column http://www.esu.eu/en/downloads/instruction-manuals/interiour-lighting-sets/?no_cache=1&tx_esudownloads_pi1%5BdownloadItem%5D=60d98d04cdb73b4004a0e9a534df3b58
  6. Having used these a few time now found them really good But when I go to use the cut of elsewhere I cannot get them to light in anyway shape or form Anybody had any luck getting the cutoff to work
  7. Could anyone recommend good 6ft or 7ft spear point fencing please not card Thank you
  8. Can someone please point me in the direction of some metal wheels insulated one side for Hornby and Bachmann coaches Thank you
  9. Most excellent show very enjoyable Got in front of the queue got round all the trade stalls no problem My only gripe was the amount of prams made it very difficult to see the layouts as the hall filled up by 11.00 But not much can be done about that
  10. A big thank you to Justin for running this one of request
  11. Maybe hattons Dave will clarify the situation so everybody knows where they stand
  12. Just like to say spoke to Justin at https://www.scalemodelscenery.co.uk/?v=79cba1185463 Today wanted an adaptation of one of his diorama baseboards What a splendid chap to deal with very accommodating A big thumbs up to you Justin
  13. This might help you to decidehttps://youtu.be/otSyshKbCqo
  14. Here is one non sound decoderhttp://www.coastaldcc.co.uk/products/roco/plux-22-pin-decoder
  15. Thank you David will have a try this morningJust to confirm these two screws they hold the bogies on ?
  16. Could someone please tell me if these can be separated and stripped down without destroying them Or point me towards a how to YouTube video Sorry if this is a novice question but searched everywhere
  17. This is what I use for speaker wirehttp://www.digitrains.co.uk/ecommerce/search/decoder-wire--brown--30awg.aspx
  18. This is what I fitted first worked okhttp://www.digitrains.co.uk/ecommerce/search/z360-8-pin-direct-decoder-with-s-a.aspx Don't make the mistake of getting a lenz direct 8 pin they don't fit Then I decided to try and follow the Hornby sound fitting guide and blew it up not for the faint hearted blew a sound decoder
  19. Well I bit the bullet on this to find out about capacitors so if it helps anyone else I soldered a 1000uf 35v capacitor to the capacitor side and A 0.22f 5.5v battery backup capacitor to the power pack side and it works extremely well You can pick the coach up of the rails turn it over and put it back down on the rails and the lights still work I did put two of these light units in a 2Hal unit look very effective
  20. Being thick here for a moment What exactly would you attached as a load resistor ? Another question what if any difference would it make if you connected a 2200uf 35v capacitor one side also a 2.2f 5.5v battery back up capacitor to the power pack side together
  21. One thing I've just found out If you purchase new from hattons The first 6 months if you get a problem you can return to hattons After that you have to return to manufacture Don't know if people knew this or not
×
×
  • Create New...