RobjUK
Members-
Posts
282 -
Joined
-
Last visited
Profile Information
-
Location
: Sheffield, England
-
Interests
Computers, programming, music, renovating guitars, model engineering.
Recent Profile Visitors
651 profile views
RobjUK's Achievements
228
Reputation
-
CAD Cutting - current state of play
RobjUK replied to JimC's topic in 3D Printing, Laser Cutting, CAD & CNC
The E3D "ASMBL" milling head concept could be used to cut / mill / engrave card or thin sheet, up to a few mm, materials on a 3D printer chassis. All the parts except the E3D toolchange plate are printed or pretty generic and readily available. The design concept could be adapted with additional or alternate printed to make a small milling head for just about any 3D printer. https://www.thingiverse.com/thing:4206827 Their original design is intended for use on a toolchanging machine, alternating between printing and precision finishing the printed layers - but in principle it's just a general purpose small milling / drilling head. They use a standard ER8 collet chuck; I've got a set of collets including for 3mm or 1/8 dremel bits etc. on the one I made. I got all the parts from either ebay or aliexpress. -
Fixing brass items to white metal kits
RobjUK replied to melmerby's topic in Kitbuilding & Scratchbuilding
6% phosphoric acid. Phosphoric acid rust remover from ebay, diluted by an appropriate amount with deionised water. The bottle I got was 73% so 11:1 for that. A litre bottle of the rust remover costs only about the same as some tiny bottles of ready to use flux, and the rest can be used for making such as paint prep cleaning/etching solutions. (1L of 85% is presently £13 inc postage, eg. https://www.ebay.co.uk/itm/144196873331 ). Once diluted below 10% it's not considered dangerous. I've used it for some time now for white metal to white metal or white metal to brass soldering, with low melting point solder, and it works very well. -
Still no response from Railmagic as to whether their system can cope with other magnets in a layout - switched and/or moving - without the field from those confusing the detectors in the locos? That seems to be the biggest weakpoint to me; software features can always be added in, but if the position detection system cannot cope with typical hardware as used in many layouts, it's a showstopper.
-
Another thought - how would the system be affected by other magnets or electromagnets, anything from solenoid point motors to track-based decouplers to older locos that have "Magnadesion" ? Using fixed magnets for navigation points implies there must be no variable magnetic fields in the same area?
-
I've been building a brass 7mm Deltic kit, a PRMRP one. The original assembly instructions say these should have a nickel silver window frame etch set, but they are no longer supplied or available according to PRMRP. I found an original DJP brass kit, around 1988 vintage - but when that arrived, a few parts were a bit bent from having motors and axles rattling about in the box for a few decades - and the window etch was damaged, only one of the four cab frames intact and a couple of the other small frames wrecked. DJP say they passed the brass kit design on to PRMRP and have nothing left. (Though the two kits have rather different construction for both the bogies and bodies; it's not the same model). I now have two kits without window etches! Does anyone know any place these are available, or is there anyone with experience creating etch artworks willing to recreate them? I took plenty of photos of the parts that were intact, with a ruler for scale. Thanks, Rob.
-
For info, be sure with any kind of crimp connector or terminal that you use a real crimp tool, not one that just flattens instead of crimping. This is a "flattener" - there is often not enough pressure to form a gas-tight contact between the wire strands and terminal sleeve, so they can corrode over time, or just pull out. Nasty crimp tool These are the better style - the jaws prevent the terminal just spreading sideways, so the metal must compress and flow - that's what makes a good reliable crimp. Better style crimp tool
-
If the coach stop position is reasonably fixed, could you make the brake external with dummy check rails that can move slightly on a servo or solenoid and spring, to apply light pressure to the inside of the wheel flanges in the appropriate stopping area. That should allow a controlled stop, based on the spring pressure?
-
Yes, he says nanoseconds, but supposedly measured and displayed to three decimal places, so down to 1/1000 nanoseconds. Smoke and mirrors, to be polite. Back on topic - Can you use a single 12V supply for both the CBUS module power and LED lighting? That may simplify things a bit.
-
I cannot see that it was working as claimed. That video of from 2013 and supposedly shows an FPGA device timing in picoseconds - a timing accuracy of one millionth of a microsecond or a count rate of 1THz, a thousand GHz. From the info I can find, the fastest FPGA reached around 1GHz in 2019. That guy posted a single "updated version" video in 2015 showing nothing but boxes with wires or connectors, and announcing a new company - whos web site does not exist now. Radio distance measurement over small ranges such as indoors in just not practical, or at least with existing technology, the timing accuracy needed is phenomenal. A more practical system could be a single overhead camera & image detection setup - possible with even a Raspberry Pi or Jetson Nano - tracking unique appearance items by visual detail, or possibly use "invisible" symbols such as IR or UV visible ink and an appropriate camera.
-
You can have different power supplies for different CBUS modules, however all the grounds must be linked to keep the CAN bus voltages within an acceptable range for the CAN transceiver ICs on each module. It's not ultra-critical, the ground links can be indirect through other wiring, just something so the different CAN modules are not totally floating. The driver ICs are designed so they will not be damaged if one part of the system is powered, as long as the ground (negative supply) voltage difference is not too great between devices. One way is just to use screened twisted pair cable for the bus and tie the screen to the module ground at each device. The bus should be twisted pair, if any significant length or running near any other cables that may have noise or inductive switching spikes. Again not all that critical over a few metres, if you are using individual wires just twist the two for the CAN bus together. Leave the ground link untwisted.
-
New to the World of 3D printing, Need Help!
RobjUK replied to Seanem44's topic in 3D Printing, Laser Cutting, CAD & CNC
Have a look at "Designspark Mechanical" - free from RS Components. I'd call it engineering modelling rather than artistic, but it's a lot easier to use than programs such as Blender - and you can define exact dimensions for items as you work. It handles multiple file formats and can import & export .step and stl among many others. -
Metalsmiths still have a site listing up to 65ft turntables - but 70ft C&S still "Under development". There is a contact phone number; it may be worth giving them a call? (The Midland railway centre site appears to either have been abandoned or hijacked.) Metalsmiths site: http://www.metalsmith.co.uk/4mm_scale_00_EM_P4.htm And contact info: http://www.metalsmith.co.uk/toolmakers-contact.htm
-
O gauge worm & gear, delrin chain & sprockets
RobjUK replied to rodent279's topic in Kitbuilding & Scratchbuilding
PRMRP list both delrin chain kits and their standard ratio gears under the "Motors, gears and delrin" category: http://www.prmrp.com/motors-gears-and-delrin.html -
Airbrush - Siphon type, spills when changing pots
RobjUK replied to RBTKraisee's topic in Modelling Questions, Help and Tips
I'd say it is inherent with the airbrush design? When you use it, paint is pulled up out the container to the nozzle. The pick-up pipe then stays full of paint when you release the trigger. Take the container off and you open the bottom of the full pickup pipe - allowing air back in and the paint out. Letting air in via the trigger first, allows the pickup to drain back before the bottom end is opened up.