Awes0mesauce

Is the twin pack DCC sound factory fitted for £579? thanks

Just pre-ordered the G+W 66. Also have the green DB on order too! Hoping to see a few more announcements soon!

@Accurascale Fran as I mentioned further up I had my 37609 pinched at a family open day. am I able to purchase the parts to convert another 37 in the range to 37609 (bodyshell etc) - if so, which would be an appropriate donor? Would 37605 which you still have in stock work? cheers

I don’t think so, but it is fairly simple. The side ploughs on the sides fit into the holes. They fit quite loose initially so make you test fit dry first - get familar with it. I use glue and glaze for the longer drying time, but you may prefer super glue - but its risky if they move. front middle one fits in the front groove. You may need to move the hoses about, but again - tiny bit of glue. - i started with the middle one for the alignment of the left and right ones to gauge their positions.

I think Richard mentioned this, expect @Accurascale Fran will confirm, but as well as the exposure and good cause, it was a big benefit of the Making Tracks 3 collab - running their stock constantly gave them a controlled pool of testing. The Mileage they must of racked up, pulling heavy loads, over a short period would of flagged weaknesses. However, they were also very well maintained throughout the duration, which you cannot count on the average consumer to do. But it gives them the best case, if maintained properly, the longevity of components under high load.

I was just referencing it as an example of failure rates as a general rule - was not comparing apples for apples with model railways. Just that there are acceptable limits. Just mentioned Semiconductors and wafers as most don’t know the failure rate so always surprises peeps so apologies. TSMCs and Samsungs rate of the latest generation Nvidia cards I believe it was had a yield of around 50%. They’ve got it substantially higher now I believe. And nvidia are doing well. Its the consumers wallets that weren’t. but yes, 5% i expect is the figure here in Accurascale terms.

Even that is not strictly true though. I have read Accurascale have even helped with that as well, as long as they had the invoice / order number and was ordered from them directly. I’m just a firm believer in letting companies try and put things right before the witch hunt starts. everything, especially electronics has an “expected” or “acceptable” failure rate. Depending on the product its anywhere between 0-10% commonly, but when you get into stuff like Semiconductors and CPUs and GPUs the yield rate can be as low as 50%. Helping Accurascale collect that data is really helpful, from a company perspective and a consumer one.

indeed - was my pride and joy 37609 - the reproduction was fantastic. Sadly mine went missing at a club Family open day a few weeks back. As everywhere is now depleted, will hopefully pick up another when the market settles down. Even more frustrating is, I helped a lot of that clubs members secure units during the drops. needless to say I am no longer a part of that club - however not all is lost as I have now discovered SMRS who are a fantastic bunch and made me very welcome indeed.

Out of interest why was this not directed to Accurascale Support? Surely thats a warranty issue which they will address? apart from the expense saved on replacing a motor under warranty for your colleague, they are kind of doing other fellow modellers a bit of a dis-service too - why? Well, you stop Accurascale from fully understanding their failure rates, which in turn means they cannot look to better their product. Judge a company not by said mistakes, but how they deal with them and improve moving forwards. if there is a motor problem, i’d rather find out before its used in more of their products as a customer. I can also assure you, from a cost perspective and brand reputation basis, that Accurascale do too.

They did the DRS 37609 just fine - and i’d argue thats a harder livery in terms of colour reproduction.

Same - i’ll be eagerly refreshing when they drop!

Roadandrails said sound was already set low on the decoder. He done an in-depth video on it. Think it was 70% as default. https://youtu.be/9GL3lgRb6jw?si=inQ2q55vQXeO4-q7

This came up previously with the TPE Nova sets. There are drawbacks to doing that for every gain. If you order for elderly club members, family, friends etc. a club membership was then suggested. The guys at accurascales answer was fair: “The product was avaliable to pre-order for months. If people chose not to do it then, then so be it.” Which i entirely get. and the view of one of the sellers I spoke to about the pricing on eBay was “I have been refreshing the page for hours and waiting - my time spent securing it, is the additional cost” whether there is any merit in that, who knows. i appreciate I was lucky on this occasion as I happened to be on the site when the stock dropped. However, i have missed other drops and agree its frustrating - but thats also my own fault for not pre-ordering. i have always tried to be fair with my orders. When I have done orders for various people in my local club I have done it one at a time - on the basis that if its still in stock when i have finished, then its fair. this time however, i did it as an order of 3 for the Club (different sound fitted 37s - DRS, ROG and 97) . 10 minutes later there was still a 97 so I was like “ah i’ll treat myself” so I did that. The irony is the priority order still hasn’t shipped, whilst my personal one did 😂😂. the £549.99 one on eBay is obscene money though. Chancer or what!

I will have shortly. actually testing it at the moment, as this is my first Class 37 (97) with the Cold start from Accurascale - and I am having the sound cut out on cold start and the decoder reset or go into some sort of reset. i expect I will have to reduce the volume on this one. this is the first one that I have that has done it and only when cold start is initiated. resolved by dropping CV63 to 180 from 192.

My Personal Banana 37 has arrived. Was a small black part loose in the box. Trying to work out where it has come from but looks great - thanks Team Accurascale! Heres to hoping the club ones ship today!