Jump to content
 

thindude

Members
 View Profile  See their activity

  • Posts

    38

  • Joined

  • Last visited

 Content Type 

Everything posted by thindude

  1. thindude

    Wanted

    thindude posted a topic in Wanted

    I'm after a Bachmann class 45 chassis preferably, or complete loco if anybody has one they want to part with. Thanks Alan
  2. thindude
    Hi does anybody have a photo of 31283 in large numbers livery I need a photo which shows the number nearest to the drivers side to see if it has a kingfisher on that side, I have found plenty of photos showing the other side. Thanks Alan
  3. thindude
    Yes it is the OO version. Thanks
  4. thindude
    Hi I have been building the DJH 02 kit myself, however I have misplaced the screws that hold the coupling rods on, I have emailed DJH without success, can you remember what size they are so I can source some replacements. Thanks
  5. thindude
    I am currently building a DJH 02 shunter kit, I have been building it for a few years. I seem to have lost the screws that hold the coupling rods onto the wheels. I have tried to contact DJH with no success, does anybody know what size screws I need as it doesn't tell you in the instructions. Thanks in advance.
  6. thindude
    Hi looking at converting a Vitrains 37/4 to a 37/5 variant with the flush front, does anybody know if a conversion kit is available or replacement nose, or if anybody has a 37/7 37/5 nose or bodyshell to sell or exchange. Thanks Alan
  7. thindude
    Will have another go at attaching my photos.
  8. thindude
    Its been a while but got some updates I have built a few more low relief buildings and replaced the loco shed with something that looks less like a box of beer. Next job will be to take off all the track and buildings paint the back scene, when that is done I can sort the points out going to use the wire in tube method for that.
  9. thindude
    Believe they were all the same size, when plaques and plates are printed on locos they are usually bigger than the replacement photo etched part, in my experience anyway.
  10. thindude
    Believe they were all the same size, when plaques and plates are printed on locos they are usually bigger than the replacement photo etched part, in my experience anyway.
  11. thindude
    They look spot on to me, struggling to find 10amp fusewire though. Thanks
  12. thindude
    What size or wire do you use for air pipes your thread shows 0.45 and 0.7, fantastic work. Thanks
  13. thindude

    NSE

    thindude posted a topic in Wanted

    Does anybody have any surplus to requirements NSE mk2 brake coach transfers, I only need to do 1 coach so don't need a full pack. I will of course pay for any transfers anybody has. Thanks
  14. thindude

    Bachmann 108 DMU

    thindude posted a topic in Wanted

    It's a long shot but does anybody have a spare Bachmann 108 DMU radiator, I purchased one off eBay u fortunately it was missing a radiator from the powercar. Or does anybody have a spare radiator 3D printed or cast from resin that would be suitable. Thanks
  15. thindude
    Did a bit more today built a mockup of the low relief loco shed, wired the track feeds in. Please find below a few photos of my progress.
  16. thindude
    After a bit more glueing this is my progress so far, even managed to get some track put down only as a test fit though. The cardboard needs to be sealed before I do that. Going to control the points with wire in tube method. Just need to find one of the Bachman single road loco servicing sheds, so if anybody has one going spare. Will upload some more photos tomorrow.
  17. thindude
    Just need some PVA glue so I can attach the top and side pieces.
  18. thindude
    Sorry didn't quite get the attaching photos right first time so here goes.
  19. thindude
    I recently purchased some Ikea display cabinets and they came packaged with some very sturdy 20mm strengthened cardboard, they looked like they may be useful as a couple of pieces were quite large and they were put to one side. Later armed with glue gun I set to work building a small baseboard was planning to build a small motive power depot, after a few hours of cutting and glueing this is what I came up with. Let me know what you think and I plan to update my progress as and when time permits.
  20. thindude
    Not yet just trying to find out how to, cheers.
  21. thindude
    Thanks for all your help, I have upgraded and am now running firmware 4.1.4.
  22. thindude
    After a nervous 30 mins think it's sorted.
  23. thindude
    Currently updating my ECoS to version 4 have done the rest, just doing to new rescue system however it says on the screen rescue mode with both stop and go buttons lit, it does seem to have taken a while so far, I did read on SW digital site when it does this be patient and wait, how long does this bit take? Thanks Alan
  24. thindude
    Thanks again for all the info. Alan
  25. thindude
    Do I need to install rescue system before I upgrade to 3.7? Sorry for all the questions. Alan
×
×
  • Create New...