michaelp

You Make Me Feel (Mighty Real) - Sylvester

Your fencing looks fantastic, many thanks for posting the photos.

Thanks for your reply, do you have any photos by any chance?

I am going to build some chainlink security fencing using the 'Ratio 436' kit, instead of using the supplied 'tulle' I want to use aluminium mesh. I had thought of using the stuff used for car body repairs but I don't know what size the mesh holes would have to be for oo gauge. Sizes of mesh holes advertised are 1.3x1.3mm, 1.5x1.5mm, and 2.5x3.5mm. If anyone can point me in the right direction for the correct size that would be great. Thanks in advance.

Thank you for your detailed reply, I will remove the keeper plate and the body to check the areas you mentioned.

Hi all, I got a brand new Hornby Class 08 R3485 'Laira' loco back in November last year, I want to run it in for about 30 mins in each direction on my rolling road. The question is, should I lubricate it first as per the maintenance sheet, the reason I ask is because I am not sure when Hornby released this model and I don't know how long it sat on a shelf. There are smears of oil on the keeper plate but I thought I would ask the question first just to be safe. Any advice would most welcome Thanks in advance.

High Energy - Evelyn Thomas

Also the Squelima SQ 12 at around £12.00 not quite as good a picture but still acceptable and a lot cheaper than the Polaroid Cube https://www.ebay.co.uk/i/273459141157?chn=ps

Walk On By - Dionne Warwick

So if using a battery connected to a rolling road what size/type of battery would be required to give sufficient running in time?

Can I ask a question please, I wanted to run in a new Hornby 08 which is DCC ready but no decoder is fitted yet, my layout is DCC but the DCC power is disconnected and all other locos have been removed from the track, I connected my Hornby DC controller to the track the loco wheels just move a fraction in both directions and stop. I checked the loco with a 9V battery and the wheels rotate fine in both directions. I don't know which model of DC controller I have on that it is a small Black Hornby controller with a Red switch that moves three 'notches' left and right with centre off position, it can be heard buzzing but the switch is switched either way the buzzing goes very faint. I have checked the output voltage and it reads pos 1 8V pos 2 10V and pos 3 14V in both directions. Is it likely that the controller is damaged? Any advice would be great Thanks in advance

Could anyone give me an idea of which colour paint to use for small concrete and wooden fence posts, the type with four wires running through them. Thanks in advance for any help.

Just look at the height of Bates Colliery headframe in the background in J7317, as always thanks for posting Dave. Edited to add apology for 'quote' box

Eyes Without A Face - Billy idol

Arrived in WH Smiths Morpeth yesterday, every bit as good as I had hoped.

Brilliant West Blyth photos Dave, thanks for posting. Michael

Captain Of Her Heart - Double

Crush - Jennifer Paige

David, I use an Antex 25W soldering iron, there are different sized tips available too. They are on Ebay for about £27.00 post free. Michael

Still not in Blyth or Morpeth WH Smiths Mal, checked 9/2/19 Michael

High Fly - John Miles

David, Try opening up a dispute with Ebay

UPside Down - Diana Ross

Thank you very much

Hi, Title says it all really, can anyone tell me the over the buffer length of the above wagon please? Thanks in advance Michael