After a short (4 year) hiatus, from modelling in general, and also 4mm modeling, I have decided to make a return. This thread will mainly be detailing and outlining the motive power for my planned layout/representation of Guildford shed.
The thing that really prompted me was seeing the wealth of SR offerings from all the different manufacturers, it was an extremely reasonably priced S15 from Hattons that kicked things off again a few weeks ago.
First up was detailing one of the excellent Hornby Maunsell coaches. Painting the door at the end, adding a belt to the alternator (if that's what it actually is) flipping the bogie and removing the rear most coupling. I also quickly tried to make the interior a little less plastiky, you can't really see anything anyways, but I know it's there!
To bring it back to the S15, which I have to say is an absolutely amazing creation. One thing that really stood out was the fall-plate, a small detail I know, but all the small details are what make a model - right? So I decided that the Schools class and the T9 both needed a change.
Nile, of this parish, used this technique, and I have shamelessly used it myself.
Here it is sitting between the rear most handrails of the cab, you can also see here the tender drawbar that I made from plastikard, as the Hornby one was too far away on the 'long' gap, and too close on the 'short' gap.
Here it is with some mesh PVA'ed on top to look like checkerplate. it can pivot up and down, and I think it's an improvement over the oddly angled glued fall plate these locos come with.
The T9 doesn't have the mesh on yet, but the cab is so narrow, I might try and attach the fireman to the fallplate, we shall see.
The final thing I've been working on, is SR route discs, i'm still unsure if these were used with reporting numbers on them during SR days, or if it was all just post nationalization. A good use of some 7mm transfers that would otherwise be in the bin.
That's all for now, I'm currently in the process of sketching out plans for a layout.
Updates as they happen, thanks for reading guys!
Edited by Jack P, 26 July 2018 - 03:21 .