Jump to content

Goathland & Grim-up-North...Next baseboard with foam castle and mini split this month.


Recommended Posts

Posted (edited)
4 hours ago, manna said:

G'Day Sasquatch.

 

Finally worked out why my pictures weren't  being resized, they were, but going to my 'Pictures' instead of My Documents, Doah !. So here's a pic of the new scratchbuilt chassis, also one of the new J7 chassis. (There's also a J5 chassis being built as well.

 

manna

DSCF5699.jpg

DSCF5696.jpg

Those look really good, solid too. What motors do you use mate?

 

I've got a DJH A8 for Goathland in my kit box and a Wills etched chassis to go in an old Airfix 4F. It's my intention to save the loco building until the layout is done though. I figured that might be a good thing to take up in my 60s!

 

Regards Shaun.

Edited by Sasquatch
...
  • Like 2
  • Round of applause 1
  • Friendly/supportive 1
Link to post
Share on other sites

G'day Shaun

 

Most of the motors I use are Mitsumi ( or something like that), the smaller ones are $5 or 10 for 5, the bigger ones are $2 each, all of the ones I bought have been good, quiet and strong enough for me, the gears are Hornby, easy to get, cheap(ish) and easy to mesh.

 

The only way at the moment to get stuff off the SD card is to put it into the video camera ( it has a cord, that fits the Computer)

 

manna

  • Like 2
Link to post
Share on other sites
8 hours ago, manna said:

Finally worked out why my pictures weren't  being resized, they were, but going to my 'Pictures' instead of My Documents, Doah !.

‘Bin there, done that!  You’d be surprised how many times I’ve had to resort to doing a second resize just so as I could see exactly where they were being stored. . .

Paul.

  • Friendly/supportive 4
Link to post
Share on other sites

Set your desktop as default for everything then just drag it to what ever folder you wish! I can honestly say I have never lost a picture this way but did loose a whole USB device once!

 

  • Like 1
  • Craftsmanship/clever 1
  • Friendly/supportive 3
Link to post
Share on other sites
Posted (edited)

The carpentry on the new board is finished. Today I made legs to my proven design, they just slot in underneath and the only improvement I came up with was to screw the board supports onto the pairs of legs instead of glue and pinning them, this will allow for adjustment!!!

DSCF2133.JPG.35b6b0044ff6cf863bb780d9b21e24c4.JPG

 

There's some fancy stuff where the legs fit in at the narrow end. The only largish chunk of wood I could find turned out to be maple which is rather hard for a soft wood. The part had to be planed out, cross cut and mitered at 36½° cross grain. Not an easy cut. Another small piece of ply was stuck to this as the leg retainer. 

DSCF2134.JPG.4245d59b05777d8618031acd1410f51b.JPG

 

 

I also had to run the abbey section through the table saw to allow trains to pass beneath now that there is a new track configuration.

DSCF2138.JPG.7210e94722c233e6c3c9f5cf573dfd42.JPG

 

 

The center rib is removable so as to allow access to the tracks at the back. Quite a lot of foam insulation sheets will be needed to make up the hill.

DSCF2135.JPG.070d2444cd3b8a7efc9bf0f78e565db1.JPG

 

 

All the different levels are evident here...

DSCF2137.JPG.7f580e5ce62f622adbce935085d4d112.JPG

 

Talking of track, this morning I made up the scissor crossing. I managed to get the track centers down to 70mm without too much surgery. All I did was to stagger the rail joints. The medium radius  point has been curved to suit not that it shows in the picture. This junction will allow switching the down lines (clockwise) to either one large inverted figure 8 or two independent circuits.

DSCF2130.JPG.c9d03c5d2edebb30bbd33a434fb9204a.JPG

 

 

Seeing as I have three capacitor discharge units I have come up with a simple idea to wire pairs of point motors on different CDUs so that one switch will throw all four turnouts. Luckily there will be no need for complicated wiring of frogs if four rail breaks are introduced at the places marked.   

DSCF2132.JPG.77f53c54165af89569e8f289ad00ea7b.JPG

 

Hopefully I'll find some more time to work on this tomorrow.

 

Squatch.

 

 

Edited by Sasquatch
inverted!
  • Like 5
  • Craftsmanship/clever 7
Link to post
Share on other sites

Modeling has ground to a halt I'm afraid. No doubt things will resume shortly but it is nice to have the dining table back.

I did manage to set up the new section in the train building and Goathland looks more complete with it's abbey and tunnel back in place. Cork has also been laid ready for track installation. After much research  on mini-split systems I think it's time to just get on and order one before the money gets spent on less important stuff. (Taken a fancy to Hornby's new A2s). :nono:

 

We also took down 3 cypress trees that had suffered from too many Oregon winters. These were behind the garage brushing up against the rear wall and were a big fire hazard. One of this years big jobs here this year is to repaint as much of the buildings as we can. That includes the garage, another reason to take out the three trees.

 

Sorry no images to share but I will make up for it next time.

 

Regards Shaun. 

  • Like 10
Link to post
Share on other sites

G'Day Shaun

 

Funny you should say your painting your buildings, I'm doing the same (that's why, no updates) weathers been perfect for it, had weeks of 27c, but it's about to change. My neck and shoulders are killing me, time for a day off.

 

I was saying a post the other week, that I've had a great run with Mitsumi motors, well the one in the J5 failed after I'd got the chassis running, had to dismantle much of the chassis to replace it, slowly putting it back together.

 

manna

  • Friendly/supportive 6
Link to post
Share on other sites
3 hours ago, manna said:

G'Day Shaun

 

Funny you should say your painting your buildings, I'm doing the same (that's why, no updates) weathers been perfect for it, had weeks of 27c, but it's about to change. My neck and shoulders are killing me, time for a day off.

 

I was saying a post the other week, that I've had a great run with Mitsumi motors, well the one in the J5 failed after I'd got the chassis running, had to dismantle much of the chassis to replace it, slowly putting it back together.

 

manna

Hi Manna mate.

 

Good to have nice weather, makes you want to get on with projects. So far all we have managed on the painting front is some prep work on the front deck ceiling. Mrs S. painted the new addition (bedroom) last year. Two days ago I took down the old chicken run we never used, to salvage the chicken wire but all the wood was really rotten. I need to have a big burn up and a dump run to complete that project but today we're dealing with a blocked septic pipe. Nasty business!

 

Much rather wish I was putting motors in something. Might just settle with repainting a Hornby Railroad range Mallard passenger blue and renaming it Sir Nigel Gresley for Goathland. My First attempt was a tender drive version. The paint looks fantastic but it runs like a sack of spuds, at least I was savvy enough to save the fox transfers until after I'd tried rebuilding it.

 

Regards Shaun.

  • Like 5
  • Friendly/supportive 2
Link to post
Share on other sites
11 hours ago, Sasquatch said:

Hi Manna mate.

 

Good to have nice weather, makes you want to get on with projects. So far all we have managed on the painting front is some prep work on the front deck ceiling. Mrs S. painted the new addition (bedroom) last year. Two days ago I took down the old chicken run we never used, to salvage the chicken wire but all the wood was really rotten. I need to have a big burn up and a dump run to complete that project but today we're dealing with a blocked septic pipe. Nasty business!

 

Much rather wish I was putting motors in something. Might just settle with repainting a Hornby Railroad range Mallard passenger blue and renaming it Sir Nigel Gresley for Goathland. My First attempt was a tender drive version. The paint looks fantastic but it runs like a sack of spuds, at least I was savvy enough to save the fox transfers until after I'd tried rebuilding it.

 

Regards Shaun.

As an inhabitant of a tied cottage for 20 years, I know septic systems.
The cottage was perfect, the Coop a good employer.
The septic system fatally flawed, until I provided photographic evidence of the blockage.:lol:
You have my sympathy in dealing with your problem.
Regards,
Chris.

  • Like 2
  • Friendly/supportive 2
Link to post
Share on other sites
On 02/04/2021 at 05:26, Sasquatch said:

 

 

There's some fancy stuff where the legs fit in at the narrow end. The only largish chunk of wood I could find turned out to be maple which is rather hard for a soft wood. The part had to be planed out, cross cut and mitered at 36½° cross grain. Not an easy cut. Another small piece of ply was stuck to this as the leg retainer. 

 

Hi,

I thought that maple, even the varieties that are often labelled soft, was actually a hardwood?

 

Roja

Link to post
Share on other sites
4 hours ago, Sandhole said:

As an inhabitant of a tied cottage for 20 years, I know septic systems.
The cottage was perfect, the Coop a good employer.
The septic system fatally flawed, until I provided photographic evidence of the blockage.:lol:
You have my sympathy in dealing with your problem.
Regards,
Chris.

Hi Chris.

 

We made the detrimental mistake of switching to Costco septic friendly bog roll which It obviously isn't because it floats! Eventually the inlet blocked but I'll spare you the details of yesterdays events :wacko:

 

Regards Shaun.

  • Thanks 1
  • Friendly/supportive 6
Link to post
Share on other sites
2 hours ago, 37Oban said:

Hi,

I thought that maple, even the varieties that are often labelled soft, was actually a hardwood?

 

Roja

Hi Roja.

 

Very confusing about wood. Hard to believe but balsa is a hardwood!

An English journeyman will say that if it comes from the tropics it's called hard on account of the lack of growth rings.

The American definition is quite different saying that  hardwood comes from angiosperms (flowering plants)  such as oak, maple, or walnut, that are not monocots and that softwood comes from gymnosperm trees.

 

To save confusion in future I should use the term dense!

 

I spent two years working for a small very meticulous furniture reproduction company. Some of the woods we used I'd never heard of before nor have been able to track them down since such as fustic (poor mans oak) and gurria which looks like bastard mahogany but has a distinct nasty sweet smell when drilled. We also used afromosia a lot. My favorite wood to work with, it was used on yew furniture and overlaid with yew veneers crossgrain! I would run my jack plane the full length of a door and take the tightly rolled shaving home to my toddler who would blow them like a party popper!

 

It just so happens that there is a piece of their furniture for sale on eBay at present.  At $1,595.00 it's a bargain!!!

March22pics2021-396.jpg.891bbe16a747684451faa603559f29f8.jpg

Regards Shaun

  • Like 8
Link to post
Share on other sites

The septic guy had the right tools and was done in a few minutes. Nice chap, full of advise on how to avoid problems in the future and how I could improve the system in a few hours with a shovel and a better connection  for a few bucks. In hindsight I realize that's what I could have done. Costco are to blame though, because he also said most of the blockages he has to deal with are caused by their supposedly septic friendly  toilet paper. So much for stocking up last year. Gonna have trouble shifting it too! Oh that reminds me...

  • Like 2
  • Friendly/supportive 3
Link to post
Share on other sites
  • RMweb Gold
4 hours ago, Sasquatch said:

It just so happens that there is a piece of their furniture for sale on eBay at present. 

 

That's bloody gorgeous mate. I love it.

 

Al.

  • Like 1
  • Agree 1
  • Thanks 1
Link to post
Share on other sites

G'Day Folks

 

Well you know what to do with Costco loo paper, after use, put it in a bag, and when you have enough, either burn it or, take it back to Costco, and dump it in one of there rubbish bins.  :yahoo: We do that when away in the Caravan.

 

manna

  • Round of applause 1
  • Funny 2
Link to post
Share on other sites
1 hour ago, Alister_G said:

 

That's bloody gorgeous mate. I love it.

 

Al.

Hi Al.

I wrote to the eBay seller and asked if he would check and see who's initials were stamped on it. He got back to me pretty quick and said. "R R" overlaid. Not mine but I think it was Winkies. Manor House Reproductions cabinet shop was one of those old school places where we all wore grey work coats, had pencils in every pocket and behind both ears! I learnt a lot there and never had trouble getting cabinet making positions after they had to let me go. They didn't last long after that, mind you there stuff was very expensive. We did a one off extra tall, 5 door, break fronted version of that in walnut for an American customer. It took over a month to put together and the price tag was more than a years wages!

 

I can still do it in my barn but it's a lot of chance these days finding customers! No one wants repro. anymore. I can do modern as well though. missionary was in vogue a few years ago when I made this desk for a friend of my father-in-law's, it's all hand dovetailed no screws or pins!

776.JPG.deb28f6644eac88c7623e1bc6868a045.JPG

 

Regards Shaun.

 

  • Craftsmanship/clever 9
  • Round of applause 1
Link to post
Share on other sites
1 hour ago, manna said:

G'Day Folks

 

Well you know what to do with Costco loo paper, after use, put it in a bag, and when you have enough, either burn it or, take it back to Costco, and dump it in one of there rubbish bins.  :yahoo: We do that when away in the Caravan.

 

manna

Deserves a round of applause that mate.  I'm going to take the bog rolls back to costco and demand a refund and present them with my drain unblocking bill! they wouldn't get away with mislabeling their products in the UK!

In fact I should walk in there with 40 gallons of septic tank crust and demand a refund for that too and see how we get on!

Edited by Sasquatch
  • Like 1
  • Funny 5
Link to post
Share on other sites

Here's all I've accomplished this week with the layout. No cabinet making what so ever unless that might include two window surrounds.

 

Platforms on Queensbury are of two types wood and stone. The stone ones have been made by making paper templates which have bee spray mounted onto three quarter ply and cut on the band saw.

They still need some work and will be dressed in Plastistruct O gauge stone and painted before installation.

DSCF2139.JPG.e02c33006b12488e1341ee4d368ab6b0.JPG

 

DSCF2150.JPG.23f1c17906310b49684a254a07ce17c5.JPG

 

 

 

Taken from outside the garage through the window is a picture showing a mock-up of the castle and hill with it's relation to the abbey and tunnel.

DSCF2144.JPG.ffdb7b5b49939cdffebb76710622dbc9.JPG

 

I also took  a couple of the Whitby end of Goathland ...

Station extension, gents and weigh bridge office.

DSCF2148.JPG.9e4deea75ec90fad408a4bd76482cdd0.JPG

 

 

This is the cutting leading down to the tunnel under the Halifax end of Queensbury.

DSCF2145.JPG.5f0a936b44f322cb18a1b5588e377cd0.JPG

 

To rap things up, two trains with the latest stock.

V2 4808 The Green Howards in Darlington green with the newly finished teak stock.

Just how I like a train to look.

DSCF2143.JPG.9b9f958b1b71d774e7d5147ca8157c11.JPG

 

Lastly K3 4006 on a Whitby bound train with that nice new BCK at the head

DSCF2141.JPG.516ec34b3f2dd4176be24b99bcde9dea.JPG

 

Regards Shaun.

 

  • Like 10
  • Round of applause 2
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.