Dickon Posted November 10, 2019 Share Posted November 10, 2019 (edited) A cheap static model of a 3 truck Shay locomotive bought on eBay has inspired me to go logging somewhere in the North American forests. The model is to a scale of 1:100 or somewhere between TT and HO scales and was mounted on a length of track close to TT gauge. I have decided to build the diorama to HO scale so that I can use surplus people from previous cake boxes rather than buy extra personnel in TT that I am unlikely to use elsewhere. My railway (railroad?) is therefore 3 foot gauge which was quite common in the forests. The locomotive is simmering gently on top of a wooden 'crib' or trestle of the type that the logging companies built from local timber to bridge across uneven or marshy ground rather than going to the expense of building conventional embankments. In front of the logging camp the crib is widened to allow a pump car or 'gandy dancer' used to run small work gangs up and down the track to be lifted off the track out of the way of the trains. The background of the diorama will be forest. The foreground will be a work yard with piles of logs and brushwood and possibly a simple Scotch derrick for loading the trains. I intend to build the crib trestle to at least one layer higher and blend it into rising ground towards the left side of the diorama. Edited November 22, 2019 by Dickon spelling 7 Link to post Share on other sites More sharing options...
Dickon Posted November 13, 2019 Author Share Posted November 13, 2019 (edited) I have now added extra foam to raise the ground behind and to the left of the trestle; the height being limited by the tallest trees some of which are now very close to the 6" cake box limit. I then covered the surface with a J-cloth soaked out with a mixture of dilute PVA and a little Pollyfilla. I've added an extra tier of logs to the trestle so it is slightly higher than the forest behind it and making sure that the left hand end tapers convincingly into the rising ground. The ground is now painted dark brown prior to a scattering of real topsoil from the garden. I'm not totally happy with the platform for the 'gandy dancer' trolley. I might try removing the tree just in front of the loco and parking the trolley in its place. Removing the platform would add to the impact of the trestle by adding effective length. Edited November 13, 2019 by Dickon 2 Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted November 13, 2019 RMweb Gold Share Posted November 13, 2019 As the ground rises towards the left, would that be a better place for the small platform? Link to post Share on other sites More sharing options...
Dickon Posted November 13, 2019 Author Share Posted November 13, 2019 17 minutes ago, Stubby47 said: As the ground rises towards the left, would that be a better place for the small platform? Possibly. But I don't want to obscure the rise in the ground as a) it's quite shallow and b) I want to show how the trestle merges into the rising ground. Putting the platform the other side of the track frees up space for more activity in the timber yard. 3 Link to post Share on other sites More sharing options...
Bo-Bo Posted November 13, 2019 Share Posted November 13, 2019 I like the trestle work on your cakebox layout, the platform looks better where the trees are. Link to post Share on other sites More sharing options...
Dickon Posted November 15, 2019 Author Share Posted November 15, 2019 (edited) The trestle is looking better after some weathering. There are however still some bare patches of dowel that need touching up. I also think than the track bed need more grime and oil around the loco. The logs are twigs from my garden, I wish I'd also used them to build the trestle as I like the texture of their bark. I do not however intend to rebuild it as I doubt that I'll find enough of a constant diameter. Next up will be topsoil to blend the trestle into the ground, a Scotch derrick and possibly a steam donkey engine to work the derrick and to skid logs around the yard. And of course people. Edited November 15, 2019 by Dickon spelling 2 Link to post Share on other sites More sharing options...
Bo-Bo Posted November 15, 2019 Share Posted November 15, 2019 I agree the trestles doesn’t look much better weathered Link to post Share on other sites More sharing options...
Dickon Posted November 15, 2019 Author Share Posted November 15, 2019 (edited) 6 minutes ago, Bo-Bo said: I agree the trestles doesn’t look much better weathered Do you mean does or doesn't? Edited November 15, 2019 by Dickon Link to post Share on other sites More sharing options...
Bo-Bo Posted November 15, 2019 Share Posted November 15, 2019 Eh sorry Dickon my typing and yes it does look better. 1 Link to post Share on other sites More sharing options...
Dickon Posted November 15, 2019 Author Share Posted November 15, 2019 (edited) Thank goodness for that........I've no intention of rebuilding the thing or stripping the paint off it Edited November 15, 2019 by Dickon 1 Link to post Share on other sites More sharing options...
Dickon Posted November 18, 2019 Author Share Posted November 18, 2019 More rust and grime on the Shay though I seem to have missed the smokebox door. Now that I've covered the surface of the baseboard with a scatter of garden topsoil, the trestle blends better with the uneven ground rather than looking as though it has been casually dropped there. I still need to address the odd two or three spots under the trestle that I've managed to miss with the paint. 3 Link to post Share on other sites More sharing options...
Bo-Bo Posted November 18, 2019 Share Posted November 18, 2019 This is looking great, nice work. Link to post Share on other sites More sharing options...
Angliacan Posted November 20, 2019 Share Posted November 20, 2019 Dickon Keep a look out in the post some 15mm engine crew plus other 15mm figures which could be converted into lumber jacks or loggers. 1 Link to post Share on other sites More sharing options...
Dickon Posted December 1, 2019 Author Share Posted December 1, 2019 (edited) I've nearly completed a skid mounted steam 'donkey' or winch which can be used to lift logs onto rail wagons with a simple derrick which I have yet to build. It's scratch built from plasticard and bits of scrap with the boiler and winch drums turned up on a little Unimat lathe. I have yet to add steam pipes, operating levers and pedals and a wooden butt full of 'water' for the boiler. Donkeys were also used to drag logs out of the forest or around the timber yards. Edited December 1, 2019 by Dickon 3 Link to post Share on other sites More sharing options...
Bo-Bo Posted December 2, 2019 Share Posted December 2, 2019 The scratch built donkey looks great. 1 Link to post Share on other sites More sharing options...
Dickon Posted December 3, 2019 Author Share Posted December 3, 2019 (edited) The Scotch derrick is beginning to take shape. It's built out of 3mm bamboo skewers with end fittings of thin wall brass tube crimped, bent and soldered as appropriate. I would have liked to have had a bit more spread on the derrick legs but available space dictated otherwise. The lumberjack will be one of a pair slewing the jib by rope while luffing and hoisting will be done by the steam donkey. I've just found a figure with a raised arm who will make a perfect banks man in charge of the operation. Both derrick and donkey need some serious weathering. Edited December 3, 2019 by Dickon 3 Link to post Share on other sites More sharing options...
Bo-Bo Posted December 3, 2019 Share Posted December 3, 2019 Lovely work, looking great. Link to post Share on other sites More sharing options...
tom q vaxy Posted December 4, 2019 Share Posted December 4, 2019 2 Link to post Share on other sites More sharing options...
Dickon Posted December 14, 2019 Author Share Posted December 14, 2019 (edited) The steam donkey now has a barrel of water for the boiler and a pile of logs conveniently close to the firebox door. I've also weathered the derrick and temporarily rigged it with button thread. I've added a chain sling to add weight under the crane hook so the hoisting rope is realistically taut. All other ropes that are supposedly under load also need to be bar taut while the ropes to the two lumberjacks slewing the load need to sag realistically as they are slack but relatively heavy. I will try to achieve both effects by stiffening the thread with bees wax and possibly using some slightly thicker thread if I can find any. Edited December 15, 2019 by Dickon 4 2 Link to post Share on other sites More sharing options...
Marly51 Posted December 15, 2019 Share Posted December 15, 2019 Some more great modelling and fascinating research, Dickon! 1 Link to post Share on other sites More sharing options...
joejab95 Posted December 20, 2019 Share Posted December 20, 2019 Looks superb, love the trestle! 1 Link to post Share on other sites More sharing options...
Dickon Posted January 2, 2020 Author Share Posted January 2, 2020 (edited) I think I'm nearly there. I now have a work gang preparing to lift the first log once the train has moved forward to bring the first wagon alongside the logs waiting to be loaded. Two men with ropes have slewed the jib to put the chain sling above one end of the first log while a colleague is reaching forward to grab and attach it to the log. A banks man stands by with in arm raised to control the lift watched by the winch driver whose mate is about to add a log to the firebox. I might try to find a good photo of some pine trees as a back drop to add some apparent depth to the forest. Edited January 2, 2020 by Dickon 1 Link to post Share on other sites More sharing options...
Dickon Posted January 4, 2020 Author Share Posted January 4, 2020 (edited) On 02/01/2020 at 11:31, Dickon said: I might try to find a good photo of some pine trees as a back drop to add some apparent depth to the forest. I wasn't able to match a photo backdrop to the existing trees so I've moved them about a bit and added one extra. A couple at the very back have had the branches trimmed back to keep them within the confines of the 8 inch square. Half and low relief trees no less. I've thoroughly enjoyed researching and modelling a major industry that led to the development of a highly charismatic rail system that I originally knew next to nothing about. Edited January 4, 2020 by Dickon 2 Link to post Share on other sites More sharing options...
RMweb Gold Sweet pea Posted January 4, 2020 RMweb Gold Share Posted January 4, 2020 Dickon you have produced a great looking cakebox layout, nice modelling throughout. 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now