Popular Post MrWolf Posted December 30, 2020 Author Popular Post Share Posted December 30, 2020 (edited) Had time for a little more progress on the station house. Gutters, flashing and bargeboards fitted. I finally summed up the courage to do the mortar and colouring to the brickwork. Funny how I can do this in 2d but 3d I have to psych myself up for... The roof is my usual mix of Humbrol 67 tank grey with a drybrushed mix of acrylic warm grey / Payne's grey. I tried to dial back the weathering a little because my reference photos represent the condition of the brickwork 80 years on from when the layout is set and the house would have only endured 50 or so winters by then.  Edited August 16, 2022 by MrWolf Replaced picture 28 18 Link to post Share on other sites More sharing options...
RMweb Gold NHY 581 Posted December 30, 2020 RMweb Gold Share Posted December 30, 2020 (edited) Top stuff, Rob. Really coming to lifenow. Rob. Edited December 30, 2020 by NHY 581 Flamin' autocorrect making me sound like a chump 2 3 1 Link to post Share on other sites More sharing options...
Popular Post MrWolf Posted December 30, 2020 Author Popular Post Share Posted December 30, 2020 Weighbridge hut is at a similar stage. I still have daft little details to add and the goods shed to finish. But I am already planning the station building... 13 10 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted December 30, 2020 RMweb Gold Share Posted December 30, 2020 (edited) Loving the weighbridge hut Rob, it looks superb and the station house is magnificent! Edited December 30, 2020 by chuffinghell 4 1 Link to post Share on other sites More sharing options...
Popular Post MrWolf Posted December 30, 2020 Author Popular Post Share Posted December 30, 2020 Been working on this for a while on and off, unfinished as yet. The only thing that I wasn't happy with was the moulded plastic 'bag' for the filler. I rolled a piece of very thin paper soaked in PVA round a plastic rod and ragged the end slightly whilst it was wet. 15 6 Link to post Share on other sites More sharing options...
RMweb Gold NHY 581 Posted December 30, 2020 RMweb Gold Share Posted December 30, 2020 (edited) Loving the water tower, Rob. I have tweaked one of the above images. There is a lovely look to your structures. Puts me very much in mind of Iain C Robinson. Rob. Edited December 30, 2020 by NHY 581 10 1 1 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted December 30, 2020 RMweb Gold Share Posted December 30, 2020 (edited) Is that a Ratio kit Rob? I’m yet to build mine, I was going to use a piece of heat shrink for my O’s like I did with my water crane Edited December 30, 2020 by chuffinghell 3 Link to post Share on other sites More sharing options...
RMweb Gold NHY 581 Posted December 30, 2020 RMweb Gold Share Posted December 30, 2020 I forgot to ask Rob, where did you source the chain from ? It looks to be very fine. Rob. 1 2 Link to post Share on other sites More sharing options...
MrWolf Posted December 30, 2020 Author Share Posted December 30, 2020 2 hours ago, chuffinghell said: Is that a Ratio kit Rob? I’m yet to build mine, I was going to use a piece of heat shrink for my O’s like I did with my water crane Yes it's the Ratio kit, it can be built as a tall flat top as here, short flat top or either conical version. It's a nice kit to build. 40 minutes ago, NHY 581 said: I forgot to ask Rob, where did you source the chain from ? It looks to be very fine. Rob. The chain is actually a rigid etch that comes as part of the water tank kit. The finest chain I have seen recently was some supplied by Cambrian models. Thanks for the photoshopping, I thought those pics were a bit dark. 2 1 Link to post Share on other sites More sharing options...
MrWolf Posted December 30, 2020 Author Share Posted December 30, 2020 Some better pictures of the water tank now that the sun is over the yard arm. Thanks for the compliment, I don't know who Iain C Robinson is, so I will have to find out now! I was very impressed with the painting of the brickwork on Martin Finney's LSWR layout "Semley" by the late Mike Jolly. The subtle lime leaching and soot on the footbridge etc is sublime. The more I look at that layout, the more careful and light weathering I see. Which is what I am aiming for rather than the run down and filthy effect of a town railway yard in the early sixties. 15 Link to post Share on other sites More sharing options...
RMweb Gold Mikkel Posted December 30, 2020 RMweb Gold Share Posted December 30, 2020 1 hour ago, MrWolf said: I don't know who Iain C Robinson is, so I will have to find out now! Sadly Iain is no longer modelling (at least publically) and has pulled his superb blog from the web. A few of his photos survive in a thread on here (which also features some of the late Allan Downes' masterful and wonderfully cheeky intrusions ). Here is an example of Iain's work: 1 1 5 Link to post Share on other sites More sharing options...
RMweb Premium figworthy Posted December 30, 2020 RMweb Premium Share Posted December 30, 2020 (edited) 1 hour ago, MrWolf said: I don't know who Iain C Robinson is, so I will have to find out now! There are quite a few pictures in this topic. Edited December 30, 2020 by figworthy 3 1 Link to post Share on other sites More sharing options...
MrWolf Posted December 31, 2020 Author Share Posted December 31, 2020 Thanks for the links everyone, I have read right through the topic and have to say that I am hugely impressed with Iain's work, definitely a standard to aim for. I also see that there was a lot of banter going on with Allan Downes. He was responsible for my first foray into structure modelling. When I was about ten, a neighbor gave me a pile of Railway Modellers and Model Railway Constructors from the 1970s. In one of them was an article on building a chalkstone (budgie grit!) barn and other ramshackle buildings. I had to have a go. Other things that I can't quite recall that influenced me (rather like when you can recall part of a song line but not the title or artist) were a LSW/GW layout with the odd name of Much cussing in the marsh and another layout from which I pinched the idea for a big tin shed and the only bit of the name I do recall was the name on the shed - Fraddon Rural District Council. I think that we all build up a hugely disorganized mental file of influences over the years. 7 2 Link to post Share on other sites More sharing options...
RMweb Gold Mick Bonwick Posted December 31, 2020 RMweb Gold Share Posted December 31, 2020 9 hours ago, MrWolf said: I think that we all build up a hugely disorganized mental file of influences over the years. Not just influences. 2 Link to post Share on other sites More sharing options...
MrWolf Posted December 31, 2020 Author Share Posted December 31, 2020 Been digging through the box of antiquities again and found another kit I remember having several of in my school days. It still stands up well, apart from the roof. I have often seen people make the dismissive comment that Wills' sheets are overscale. I don't think so, the kit parts at the top of the picture have slates approximately 4.5mm square. The offcut of Wills' slates underneath is what I have made as a replacement, if only to maintain continuity with the rest of the railway buildings. 6 Link to post Share on other sites More sharing options...
MrWolf Posted January 2, 2021 Author Share Posted January 2, 2021 (edited) Back to the pagoda hut briefly. The more I looked at the gutters, the more #### they looked. Not helped by the rather wonky roof mouldings. I had some Peco guttering from the same sprues I have been using elsewhere and although not as detailed as the cast iron style ones by Ratio, they are smaller in section and look okay as 4" galvanized guttering. So I attacked the finished model with a knife... So it looks like @chuffinghell has got his own back on me a little for encouraging his OCD... Edited August 16, 2022 by MrWolf Replaced picture 13 Link to post Share on other sites More sharing options...
MrWolf Posted January 2, 2021 Author Share Posted January 2, 2021 (edited) Possibly a gnats overscale but it looks better to me. A coat of black tar paint on the roof plus light weathering helps too. Edited August 16, 2022 by MrWolf 10 1 1 Link to post Share on other sites More sharing options...
MrWolf Posted January 2, 2021 Author Share Posted January 2, 2021 (edited) Whilst scratching around for bits of gutters, from the same sprue I retrieved this pair of doors and whilst not strictly accurate, they gave me an idea. There's a standard GWR type hut that has a more usual use of corrugated iron for its roof than the pagoda hut. I am basing my model on a 14' X 8' design which stood at Thame among other places. This time I have raided Wills' kits wayside station for the window frame. More bits of which will go into the main station building. I suspect that building this shed is another case of "Avoidance behaviour" Edited August 16, 2022 by MrWolf Replaced picture 9 Link to post Share on other sites More sharing options...
Tallpaul69 Posted January 2, 2021 Share Posted January 2, 2021 1 hour ago, MrWolf said: Whilst scratching around for bits of gutters, from the same sprue I retrieved this pair of doors and whilst not strictly accurate, they gave me an idea. There's a standard GWR type hut that has a more usual use of corrugated iron for its roof than the pagoda hut. I am basing my model on a 14' X 8' design which stood at Thame among other places. This time I have raided Wills' kits wayside station for the window frame. More bits of which will go into the main station building. I suspect that building this shed is another case of "Avoidance behaviour" This building is of great interest to me for my impending model of Thame, so please keep us updated! Cheers Paul 2 1 Link to post Share on other sites More sharing options...
MrWolf Posted January 2, 2021 Author Share Posted January 2, 2021 (edited) Thanks Paul, I have only seen one photo of the hut at Thame. It stood between the footbridge and the road bridge. This is it, pinched from one of the 2mm online groups. I believe that they pinched it from one of the Great Western branch line modelling series of books by Stephen Williams. PICTURE M.I.A. Proportionally it's one of the lower rooved models that stand 7'6" at the apex of the curved ends. The whole standing on a sleeper base. There are others which stand a foot higher all round, such as this one which is a 20'x 8' footprint. Not 100% sure where this is although the unusual paint job suggests Eynsham. Edited August 16, 2022 by MrWolf PostScript! 7 Link to post Share on other sites More sharing options...
MrWolf Posted January 2, 2021 Author Share Posted January 2, 2021 (edited) This one turned out to be a quick job. I reinforced the roof with three strips of 60 thou before cutting enough Slater's corrugated sheet for the roof. I then cut the sheet into strips, curved it round a marker pen (undersize) and secured them one at a time with MEK. Whilst too thick to overlap prototypically, any indiscrepancy in butting them together gives the impression that they are overlapped. The roof needs a haircut yet but I will leave it overnight to harden. It is sitting on the right size of sleeper base cut from good ol' coffee stirrers. Edited August 16, 2022 by MrWolf 13 5 Link to post Share on other sites More sharing options...
wiggoforgold Posted January 3, 2021 Share Posted January 3, 2021 11 hours ago, MrWolf said: Thanks Paul, I have only seen one photo of the hut at Thame. It stood between the footbridge and the road bridge. This is it, pinched from one of the 2mm online groups. I believe that they pinched it from one of the Great Western branch line modelling series of books by Stephen Williams. Proportionally it's one of the lower rooved models that stand 7'6" at the apex of the curved ends. The whole standing on a sleeper base. There are others which stand a foot higher all round, such as this one which is a 20'x 8' footprint. Not 100% sure where this is although the unusual paint job suggests Eynsham. The picture of the footbridge only is Yelverton. Re the guttering, I've got some of the new Modelu guttering to try on my pagoda, so wi8ll see how that works out. Just bee redoing the door this morning, inspired by yours! Alex Alex 1 1 1 Link to post Share on other sites More sharing options...
MrWolf Posted January 3, 2021 Author Share Posted January 3, 2021 (edited) I hadn't noticed that, the woodwork at the bottom of the stairs is really impressive. I'm going to go out on a Prince Charles type of limb here and say that the loss of such things is what is wrong with modern architecture. I draw the line at about 1960. I found a new way to cheat when I did the doors of the Thame hut, cut off the location flanges stuck a piece of 0.030" plastic across the doorway and packed the doors forward with a shim of 0.005". I'm glad (and flattered!) that I have inspired someone else though! Rob Edited January 3, 2021 by MrWolf Stupid autocorrect 2 1 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted January 3, 2021 RMweb Gold Share Posted January 3, 2021 On 02/01/2021 at 00:06, MrWolf said: ....So it looks like @chuffinghell has got his own back on me a little for encouraging his OCD... sorry about that 5 Link to post Share on other sites More sharing options...
RMweb Premium Banger Blue Posted January 3, 2021 RMweb Premium Share Posted January 3, 2021 17 hours ago, MrWolf said: Thanks Paul, I have only seen one photo of the hut at Thame. It stood between the footbridge and the road bridge. This is it, pinched from one of the 2mm online groups. I believe that they pinched it from one of the Great Western branch line modelling series of books by Stephen Williams. Proportionally it's one of the lower rooved models that stand 7'6" at the apex of the curved ends. The whole standing on a sleeper base. There are others which stand a foot higher all round, such as this one which is a 20'x 8' footprint. Not 100% sure where this is although the unusual paint job suggests Eynsham. It is the Fairford Branch but it’s South Leigh. Same photo here: Fairford Branch - South Leigh 1 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now