grahame Posted June 26, 2017 Author Share Posted June 26, 2017 I've cut the front wall of the PO/ward block from card and have started to add relief from various thicknesses of card and styrene sheet: G. 2 Link to post Share on other sites More sharing options...
grahame Posted June 26, 2017 Author Share Posted June 26, 2017 (edited) Sides added, and then gently, gently, cut and glue, various bits of card and styrene, to build up the relief: G. Edited June 26, 2017 by grahame 2 Link to post Share on other sites More sharing options...
RMweb Gold phil_sutters Posted June 26, 2017 RMweb Gold Share Posted June 26, 2017 Although it doesn't help you with your Borough High Street properties, here is a photo of the museum not shrouded in scaffolding and plastic sheet! I do have one of the buildings a bit further down Borough High Street which could present a challenge that couldn't be solved with a sharp blade and a straight edge. 1 Link to post Share on other sites More sharing options...
grahame Posted June 26, 2017 Author Share Posted June 26, 2017 Although it doesn't help you with your Borough High Street properties, here is a photo of the museum not shrouded in scaffolding and plastic sheet! The Old Operating Theatre & Herb Garret 29 1 2009.JPG Thanks. That's a good clear pic and is a building I need to make. I'll save a copy for future reference. Apparently it was originally St Thomas church. It still looks quite like one. G Link to post Share on other sites More sharing options...
RMweb Gold phil_sutters Posted June 26, 2017 RMweb Gold Share Posted June 26, 2017 (edited) Thanks. That's a good clear pic and is a building I need to make. I'll save a copy for future reference. Apparently it was originally St Thomas church. It still looks quite like one. G It was quite difficult to get a decent frontal view as St Thomas Street is quite narrow and the tower is tall - by some standards, but dwarfed originally by the Guys Hospital tower and now by the Shard. Edited June 26, 2017 by phil_sutters Link to post Share on other sites More sharing options...
grahame Posted June 26, 2017 Author Share Posted June 26, 2017 Slowly, slowly, and the details will come. Still lots to do but now starting to look like what it should: G 2 Link to post Share on other sites More sharing options...
grahame Posted June 27, 2017 Author Share Posted June 27, 2017 I've now made a start on the modern post office entrance as a separate sub-assembly: G. 3 Link to post Share on other sites More sharing options...
grahame Posted June 27, 2017 Author Share Posted June 27, 2017 and added the decorative top balustrade: G. 5 Link to post Share on other sites More sharing options...
grahame Posted June 27, 2017 Author Share Posted June 27, 2017 (edited) Not much more to report today. I think I've got all the necessary relief detail on the front and have given it base coat of paint and matt varnish. Any further details required can be paint effects. G. Edited June 27, 2017 by grahame 4 Link to post Share on other sites More sharing options...
grahame Posted July 10, 2017 Author Share Posted July 10, 2017 Right, here we go with making a start on the next building along - the corner block (Borough High Street and St Thomas Street): I've been studying old photos, those I've taken (like above) and google maps aerial shots, and have sketched up a plan and front elevation to full size ready to start cutting card: G. 1 Link to post Share on other sites More sharing options...
grahame Posted July 10, 2017 Author Share Posted July 10, 2017 The first constructional steps are to form a framework, on which to hang the walls and decorate with architectural details, simply cut from 1.5mm mount card: G. 3 Link to post Share on other sites More sharing options...
RMweb Gold phil_sutters Posted July 10, 2017 RMweb Gold Share Posted July 10, 2017 Yes, thanks. That's a great old photo. That building (at 19 Boro High Street) in front of the PO had gone by the mid 70s. The building to the left of it was demolished about five years ago (which is the one I've just made) and the one on the far right (around the corner in St Thomas Street in front of the ward block) has also been replaced. Here's a photo taken from roughly from the same place last week. The tower in scaffolding is the old hospital operation theatre museum. Note that the shoe repairers on the corner is now a vaping shop - how times change : G The shoe repairer's in fact sold a wide range of leather goods - wallets, belts, satchels, brief cases, key cases etc. Their windows were full of them. You couldn't see into the shop itself as far as I can remember, apart from through the glazed door panel. Link to post Share on other sites More sharing options...
grahame Posted July 10, 2017 Author Share Posted July 10, 2017 I certainly can't dress it as a vaping shop - far too recent a fad. Perhaps the old cobblers shop can be resurrected but with an update. And a start made, as the last bit of modelling effort today, on the front wall. It's not fixed in place as it is only the basic façade and there is still a lot of work to be done on it. G. 2 Link to post Share on other sites More sharing options...
grahame Posted July 10, 2017 Author Share Posted July 10, 2017 When you're enjoying making a model it's difficult to put it down, so a little more tonight: G. 4 Link to post Share on other sites More sharing options...
grahame Posted July 11, 2017 Author Share Posted July 11, 2017 I've been adding some architectural details to the front elevation from styrene strip. It's not an absolute accurate rendering but hopefully is representational enough to pass muster as being of the real building. And once painted should blend together: G. 3 Link to post Share on other sites More sharing options...
grahame Posted July 11, 2017 Author Share Posted July 11, 2017 A quick photo update before I go out to get some lunch and pick up a prescription: G. 1 Link to post Share on other sites More sharing options...
grahame Posted July 11, 2017 Author Share Posted July 11, 2017 I got a little side-tracked watching the Tour de France so only a little progress: G. 5 Link to post Share on other sites More sharing options...
RMweb Gold phil_sutters Posted July 11, 2017 RMweb Gold Share Posted July 11, 2017 (edited) About 3 miles east of your models Just mention a topic and I'll try and clog up your excellent thread with something from my files! Edited July 11, 2017 by phil_sutters 2 Link to post Share on other sites More sharing options...
grahame Posted July 12, 2017 Author Share Posted July 12, 2017 (edited) The roof sections are made as separate sub-assemblies like little tents from card frames and a covered with styrene sheet. Over the pitched sides will be stuck Redutex slate covering which is self adhesive (and the windows added to the flat roofed one): When complete they will be glued in place but here they are simply placed to show how they fit: G. Edited July 12, 2017 by grahame 4 Link to post Share on other sites More sharing options...
sb67 Posted July 12, 2017 Share Posted July 12, 2017 Fantastic modelling Grahame, I like seeing the basic shell and buildings coming together. Have you built anything in other scales, I guess the techniques could be used for 4mm buildings? Steve. Link to post Share on other sites More sharing options...
grahame Posted July 12, 2017 Author Share Posted July 12, 2017 Fantastic modelling Grahame, I like seeing the basic shell and buildings coming together. Have you built anything in other scales, I guess the techniques could be used for 4mm buildings? Thanks. No other scales ATM. But I guess if I made them to bigger scales the same techniques would work although with more bracing and possibly thicker sheet material. G. Link to post Share on other sites More sharing options...
grahame Posted July 12, 2017 Author Share Posted July 12, 2017 I tend to make various sections of a building as sub-assemblies. This makes them easier to finish (paint, detail, etc) and particularly to allow the windows to be glazed as access from behind is very limited and often very small. However, I do regularly check the fit of them to ensure that it will all go together when ready. G. 2 Link to post Share on other sites More sharing options...
grahame Posted July 12, 2017 Author Share Posted July 12, 2017 The reddish brick rectangle in the previous photo is the back of the tower part of the building. I've not been able to find any photograph evidence of what the rear looked/looks like and the current Google aerial photography is rather vague, but fortunately it'll be mostly hidden by other buildings so just a few high level windows have been cut in it to suit some Scene-setters glazing bars: Tomorrow I hope to start getting the base brick colour on various bits of the model. G. 1 Link to post Share on other sites More sharing options...
RMweb Gold phil_sutters Posted July 12, 2017 RMweb Gold Share Posted July 12, 2017 (edited) The reddish brick rectangle in the previous photo is the back of the tower part of the building. I've not been able to find any photograph evidence of what the rear looked/looks like and the current Google aerial photography is rather vague, but fortunately it'll be mostly hidden by other buildings so just a few high level windows have been cut in it to suit some Scene-setters glazing bars: Tomorrow I hope to start getting the base brick colour on various bits of the model. G. Have you tried the 3D version of Google maps? This (if it works) does show some detail. https://www.google.co.uk/maps/place/London+Borough+of+Southwark/@51.5046378,-0.0891455,89a,35y,39.59t/data=!3m1!1e3!4m5!3m4!1s0x48760398794427df:0x41185c626be6770!8m2!3d51.4834479!4d-0.0820877?hl=en Not that it helps with this query, but are you aware that Southwark has a mapping service. There is an aerial view in 2010 or 2013, http://maps.southwark.gov.uk/connect/southwark.jsp?tooltip=yes You drag to move about and the zoom tool is on the left - all fairly obvious! Edited July 12, 2017 by phil_sutters Link to post Share on other sites More sharing options...
grahame Posted July 13, 2017 Author Share Posted July 13, 2017 Have you tried the 3D version of Google maps? This (if it works) does show some detail. https://www.google.co.uk/maps/place/London+Borough+of+Southwark/@51.5046378,-0.0891455,89a,35y,39.59t/data=!3m1!1e3!4m5!3m4!1s0x48760398794427df:0x41185c626be6770!8m2!3d51.4834479!4d-0.0820877?hl=en Not that it helps with this query, but are you aware that Southwark has a mapping service. There is an aerial view in 2010 or 2013, http://maps.southwark.gov.uk/connect/southwark.jsp?tooltip=yes You drag to move about and the zoom tool is on the left - all fairly obvious! Thanks. I've been using Google maps but I find it quite frustrating. As you zoom in, in both 2D and 3D modes, to inspect the detail it suddenly whooshes you down to ground level and dumps you in the street with a street view. The Southwark mapping service is interesting although it doesn't seem to have a 3D facility and is a shame there isn't an older version than 2010. BING has a map service with aerial and 3D view which tends to be not so up to date as Google but the pics seem more fuzzy. G. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now