PenrithBeacon Posted December 1, 2016 Share Posted December 1, 2016 Please can anyone suggest a source for a 4mm drawing of this type. Also which High Level gearbox to use. MTIA Regards Link to post Share on other sites More sharing options...
RMweb Premium Michael Edge Posted December 2, 2016 RMweb Premium Share Posted December 2, 2016 GA and other drawings were in the LMS Journal preview edition. Link to post Share on other sites More sharing options...
PenrithBeacon Posted December 2, 2016 Author Share Posted December 2, 2016 GA and other drawings were in the LMS Journal preview edition.Thank you for that. Regards Link to post Share on other sites More sharing options...
RexAshton Posted December 2, 2016 Share Posted December 2, 2016 I put a Roadrunner+ in one for a client. Because it was 00 the frames were too close together and the Roadrunner lifted the motor high enough to clear them. The plus also allows you the drive the rear coupled axle but keep the motor out of the cab - I used a Mashima 1220. Link to post Share on other sites More sharing options...
PenrithBeacon Posted December 2, 2016 Author Share Posted December 2, 2016 Thanks Regards Link to post Share on other sites More sharing options...
PenrithBeacon Posted January 15, 2017 Author Share Posted January 15, 2017 Found a copy of 'Railway Magazine' May 1997 which does the trick. http://www.magazineexchange.co.uk/railway-modeller-magazine-may-1997-issue.html?&cat=4624 Regards Link to post Share on other sites More sharing options...
Jub45565 Posted January 17, 2017 Share Posted January 17, 2017 Hi David, I built (well, still not quite finished detailing the body, I really should do so soon...) the London Road Models kit here: http://www.rmweb.co.uk/community/index.php?/topic/97369-kit-build-lrm-lms-2p-0-4-4t-p4/ I think I used the High Level Hi flyer - but will double check this and confirm. Beware of the drawing in the Modeller, I think it is that one which has the cab opening drawn wrong (and which is copied by the LRM kit unfortunately - part of the reason my build stalled), but the LMS Journal mentioned by Mike is an excellent and detailed resource, and there are quite a few photos around online. Cheers, Link to post Share on other sites More sharing options...
PenrithBeacon Posted January 17, 2017 Author Share Posted January 17, 2017 Hi David, I built (well, still not quite finished detailing the body, I really should do so soon...) the London Road Models kit here: http://www.rmweb.co.uk/community/index.php?/topic/97369-kit-build-lrm-lms-2p-0-4-4t-p4/ I think I used the High Level Hi flyer - but will double check this and confirm. Beware of the drawing in the Modeller, I think it is that one which has the cab opening drawn wrong (and which is copied by the LRM kit unfortunately - part of the reason my build stalled), but the LMS Journal mentioned by Mike is an excellent and detailed resource, and there are quite a few photos around online. Cheers, The magazine is in the post, I'll check and the kit against the LMSJ when it arrives. Thanks for the heads up. Regards Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.