D5541 Posted May 18, 2017 Share Posted May 18, 2017 Morning all Out of curiosity, and if I asked really nicely, is there anyone in the Cheltenham area who would be able to spare a couple of hours over a weekend to teach a lemon how to solder? reading about it n watching YouTube videos doesn't help in the slightest, I learn much better with practical work! Tea and biscuits can be provided :-) Link to post Share on other sites More sharing options...
stevejjjexcov Posted May 18, 2017 Share Posted May 18, 2017 Would love to help but unfortunately I am in wales. I hope you find someone to help. But what I will suggest is you get some scrap brass,solder and flux and give it a go. I use a 40w antex iron, liquid and paste flux, and tin lead solder. Seems to work ok for me. As they say practice makes perfect!! Good luck Steve Link to post Share on other sites More sharing options...
brossard Posted May 18, 2017 Share Posted May 18, 2017 I think it would help if you specified whether you want to solder wiring or a kit. I concur with Steve, get some practice in. John Link to post Share on other sites More sharing options...
D5541 Posted May 19, 2017 Author Share Posted May 19, 2017 That's a good point actually, it's kits that I'm looking to start with :-) n I have tried to do it on my own, I just seen to end up with 2 separate bits of metal n a blob of solder on one of them... Link to post Share on other sites More sharing options...
RMweb Premium PaulCheffus Posted May 19, 2017 RMweb Premium Share Posted May 19, 2017 That's a good point actually, it's kits that I'm looking to start with :-) n I have tried to do it on my own, I just seen to end up with 2 separate bits of metal n a blob of solder on one of them... Hi Are you using a separate liquid flux. I could never manage to solder brass kits until I discovered flux then it was very easy and straightforward. Cheers Paul Link to post Share on other sites More sharing options...
brossard Posted May 19, 2017 Share Posted May 19, 2017 A 40W iron at least, and pay a few bob, don't get the cheapest. (The best thing is to get a 50W soldering station with adjustable tip temp.) Gaugemaster and DCC Concepts do soldering supplies. I use a non acid flux these days (the phosphoric acid type rots bits and gets up my nose) and I've just ordered solder from DCC concepts (I've used Carrs almost exclusively in the past). A couple of fiberglass pens are useful for cleaning the work before and after soldering. I cut a tiny amount of solder off the solder and pick that up with the iron. This helps control the amount going on. Everyone seems to have their own ideas about the topic. John 1 Link to post Share on other sites More sharing options...
stevejjjexcov Posted May 19, 2017 Share Posted May 19, 2017 (edited) I agree with Bossard when soldering anything brass nickel or white metal cleanliness is next to godliness. D5541 if you end up with a blob of solder either the work pieces are not clean, there is not enough heat from the iron or not enough flux to allow the solder to flow. Good luck and keep trying Steve P.S I forgot to say don't rely solely on the flux in cored solder. Edited May 19, 2017 by stevejjjexcov Link to post Share on other sites More sharing options...
RMweb Premium kevinlms Posted May 19, 2017 RMweb Premium Share Posted May 19, 2017 P.S I forgot to say don't rely solely on the flux in cored solder. Except when soldering electronic parts to printed circuit boards. Nothing else should be needed, just make sure surfaces are clean. Link to post Share on other sites More sharing options...
Killybegs Posted May 19, 2017 Share Posted May 19, 2017 What about joining a local club? There will be someone there to offer advice and help. Your options are Gloucester Model Railway Club or Cheltenham GWR Modellers Group. Or if you are into P4, the Glevum Group of the Scalefour Society. Link to post Share on other sites More sharing options...
Shez Posted May 20, 2017 Share Posted May 20, 2017 When I first started attempting to solder I really struggled despite following all the advice. Iron hot enough for the job, correct solder, clean the parts etc....Turned out that I had not got the parts clamped together tight enough. Use small wooden clothes pegs, wooden blocks in the vice or blu tack, but the tighter the gap between the parts you are trying to join the better the solder will flow. It was Phil at Hobby Holidays who pointed out to me that "solder loves small gaps".... Phil's courses would be another option but I don't think he is doing any this year. See the Hobby Holidays website. 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now