RMweb Premium RobA2345 Posted September 16, 2019 RMweb Premium Share Posted September 16, 2019 Hi all, I've come from N Gauge but I'm a bit of a track guy and while the code 55 stuff looks okay I always found the embedded rail a nightmare to work with so I decided to give 2FS a go and this is my first attempt. Its a timelapse album to show progress over time. I still have tons to do but its getting there. Track is a mix of soldered hand built and the associations 'easitrac', the crossing was very hard to get right but I'm getting used to knocking out points now. All 5 wagons are etched chassis with a mix of some etched van tops and some plastic (I think the plastic ones look great). Anyway I thought I'd share for feedback. I post some updates on Facebook but I think the build gets lost over time but let me know your thoughts anyway. https://flic.kr/s/aHsmGAQMHA 2 Link to comment Share on other sites More sharing options...
RMweb Gold MarshLane Posted September 16, 2019 RMweb Gold Share Posted September 16, 2019 Hi Rob, NIcely done. Im just starting on the 2FS road too, although in my case its a downgrade from 7mm! The trackwork looks far better than N and your doing really well. Im currently attempting a point with the Association etched chairs! Well done that chap, I've marked your thread to follow. There is plenty of support and help on here if you need it - do keep posting updates. Rich Link to comment Share on other sites More sharing options...
RMweb Premium nick_bastable Posted September 16, 2019 RMweb Premium Share Posted September 16, 2019 well done track looks excellent ( may I suggest you add a few photos here ) is that a slip in which case your braver than I Nick Link to comment Share on other sites More sharing options...
RMweb Premium RobA2345 Posted September 17, 2019 Author RMweb Premium Share Posted September 17, 2019 9 hours ago, MarshLane said: Hi Rob, NIcely done. Im just starting on the 2FS road too, although in my case its a downgrade from 7mm! The trackwork looks far better than N and your doing really well. Im currently attempting a point with the Association etched chairs! Well done that chap, I've marked your thread to follow. There is plenty of support and help on here if you need it - do keep posting updates. Rich Thanks Rich. I started in 4mm, I can't imagine going down 2 scales, it must seem micro! I've not decided whether to put some cosmetic chairs on the pointwork, it's one of the reasons I haven't ballasted yet. The other being I'm doing some off layout experiments with Chris Nevard's technique of using modelling clay as ash ballast. I want a very fine looking ballast for the sidings and approach to the shed. 8 hours ago, nick_bastable said: well done track looks excellent ( may I suggest you add a few photos here ) is that a slip in which case your braver than I Nick Nah sadly it just crosses the mainline. I could probably do a slip, but I've grown attached to my hair. I'll add some pics to the post now. Cheers. 1 Link to comment Share on other sites More sharing options...
RMweb Premium RobA2345 Posted September 17, 2019 Author RMweb Premium Share Posted September 17, 2019 11 1 Link to comment Share on other sites More sharing options...
RMweb Gold scottystitch Posted September 17, 2019 RMweb Gold Share Posted September 17, 2019 Outstanding, and not just the track. Lovely looking layout. Thanks for sharing, very inspirational. 1 1 Link to comment Share on other sites More sharing options...
Lacathedrale Posted September 17, 2019 Share Posted September 17, 2019 Cracking little layout right there - are these your first efforts building track? They look really lovely! 1 Link to comment Share on other sites More sharing options...
RMweb Gold chuffinghell Posted September 17, 2019 RMweb Gold Share Posted September 17, 2019 Fantastic 1 Link to comment Share on other sites More sharing options...
RMweb Premium RobA2345 Posted September 17, 2019 Author RMweb Premium Share Posted September 17, 2019 2 hours ago, Lacathedrale said: Cracking little layout right there - are these your first efforts building track? They look really lovely! First go at soldered pointwork yes. I'd dabbled with Easitrac points but couldn't get them to work without the joggle in the stock rails. I used the brass cast crossing on all but one where I built the crossing myself as I just wanted to see if I could. Link to comment Share on other sites More sharing options...
RMweb Gold MarshLane Posted September 17, 2019 RMweb Gold Share Posted September 17, 2019 5 hours ago, RobA2345 said: Thanks Rich. I started in 4mm, I can't imagine going down 2 scales, it must seem micro! I've not decided whether to put some cosmetic chairs on the pointwork, it's one of the reasons I haven't ballasted yet. The other being I'm doing some off layout experiments with Chris Nevard's technique of using modelling clay as ash ballast. I want a very fine looking ballast for the sidings and approach to the shed. Hi Rob, Interesting shall we say! But fascinating in many respects. Haven't dabbled with N gauge for 20 odd years! Laurie Adams did an article in the journal back in 2018 I gather if you need some background information on the etched chairs. Whereabouts are you based? I forgot to ask last night, what's the overall size of the layout? Rich Link to comment Share on other sites More sharing options...
RMweb Premium RobA2345 Posted September 17, 2019 Author RMweb Premium Share Posted September 17, 2019 20 minutes ago, MarshLane said: Hi Rob, Interesting shall we say! But fascinating in many respects. Haven't dabbled with N gauge for 20 odd years! Laurie Adams did an article in the journal back in 2018 I gather if you need some background information on the etched chairs. Whereabouts are you based? I forgot to ask last night, what's the overall size of the layout? Rich Layout is 48" by 11". I've had 3 failed attempts at my ultimate modelling ambition to model Paignton Station with the crossing in pretty high detail but never got any of the buildings built so it just looked naff. I'm based in Bury, North Manchester 1 Link to comment Share on other sites More sharing options...
RMweb Premium Ian Morgan Posted September 17, 2019 RMweb Premium Share Posted September 17, 2019 That is impressive, and appears to have come together in just a few months. I started in 2mmFS around 1989. The Basingstoke club were creating nice looking N gauge layouts, but even with hand built track, the running was appalling. We decided to give finescale a go, and built Alresford. Initially, we had a Graham Farish 33 with turned down wheels and a BH Enterprises 2H with Graham Farish motor bogie and turned down wheels. We could do slow, hands-free shunting in the yard for hours on end. Since then, I have been involved with 5 subsequent 2mmFS layouts. Keep up the good work. Link to comment Share on other sites More sharing options...
RMweb Gold MarshLane Posted September 17, 2019 RMweb Gold Share Posted September 17, 2019 10 minutes ago, RobA2345 said: Layout is 48" by 11". I've had 3 failed attempts at my ultimate modelling ambition to model Paignton Station with the crossing in pretty high detail but never got any of the buildings built so it just looked naff. I'm based in Bury, North Manchester Hi Rob, Really nicely done within 4'. The reason for asking your location is to say search out your local area group (if you haven't done so already) - they can be a great help and really supportive ... also a meeting tends to give one some incentive if its needed to push on with things! I think the Pennine Area Group in New Mills would be your closest. Know Bury quite well, one side of the family comes from there and still have family need Radcliffe! Rich Link to comment Share on other sites More sharing options...
RMweb Premium RobA2345 Posted September 17, 2019 Author RMweb Premium Share Posted September 17, 2019 (edited) 1 hour ago, Ian Morgan said: That is impressive, and appears to have come together in just a few months. I started in 2mmFS around 1989. The Basingstoke club were creating nice looking N gauge layouts, but even with hand built track, the running was appalling. We decided to give finescale a go, and built Alresford. Initially, we had a Graham Farish 33 with turned down wheels and a BH Enterprises 2H with Graham Farish motor bogie and turned down wheels. We could do slow, hands-free shunting in the yard for hours on end. Since then, I have been involved with 5 subsequent 2mmFS layouts. Keep up the good work. I'll confess I've not got the running nailed down yet, some of my track work is a little bumpy and the Farish loco's I've converted seem to stall a lot but none of these issues are unfixable. Honestly it's the look of the trackwork that motivates the 2FS, I'm happy with that side and picked up a lot of direct and indirect skills as a result. Edited September 17, 2019 by RobA2345 1 Link to comment Share on other sites More sharing options...
RMweb Premium RobA2345 Posted September 17, 2019 Author RMweb Premium Share Posted September 17, 2019 1 hour ago, MarshLane said: Hi Rob, Really nicely done within 4'. The reason for asking your location is to say search out your local area group (if you haven't done so already) - they can be a great help and really supportive ... also a meeting tends to give one some incentive if its needed to push on with things! I think the Pennine Area Group in New Mills would be your closest. Know Bury quite well, one side of the family comes from there and still have family need Radcliffe! Rich I think I initially looked at the Pennine group but the blog doesn't provide any contact for a coordinator (if there is one) but I'll put something on the group forum and try and pick something up. Thanks for the tip! 1 Link to comment Share on other sites More sharing options...
RMweb Premium nick_bastable Posted September 17, 2019 RMweb Premium Share Posted September 17, 2019 7 hours ago, RobA2345 said: Nah sadly it just crosses the mainline. I could probably do a slip, but I've grown attached to my hair. I'll add some pics to the post now. Cheers. by making it a slip the main line becomes much more usable instead of a shuttle track and will increase operational potential Nick 1 1 Link to comment Share on other sites More sharing options...
RMweb Premium RobA2345 Posted September 17, 2019 Author RMweb Premium Share Posted September 17, 2019 5 minutes ago, nick_bastable said: by making it a slip the main line becomes much more usable instead of a shuttle track and will increase operational potential Nick Yeah I know what you're saying, the mainline as it stands is really nothing more than a display track. Initially it was just going to be another Inglenook which is how the track plan was first planned. It's a good shout though and I'll definitely be considering it. 1 Link to comment Share on other sites More sharing options...
RMweb Premium RobA2345 Posted September 21, 2019 Author RMweb Premium Share Posted September 21, 2019 Added some details. Really pleased with how it's come out. 7 Link to comment Share on other sites More sharing options...
RMweb Premium Bill37 Posted September 21, 2019 RMweb Premium Share Posted September 21, 2019 Looking good. Bill. Link to comment Share on other sites More sharing options...
RMweb Gold MarshLane Posted September 21, 2019 RMweb Gold Share Posted September 21, 2019 Hi Rob, Looking very good - once you get the track ballasted, it will be superb! Are you happy with the running quality of your trackwork? It looks good from the photos. Rich Link to comment Share on other sites More sharing options...
RMweb Premium RobA2345 Posted September 22, 2019 Author RMweb Premium Share Posted September 22, 2019 13 hours ago, MarshLane said: Hi Rob, Looking very good - once you get the track ballasted, it will be superb! Are you happy with the running quality of your trackwork? It looks good from the photos. Rich I think I need a back to back gauge as some of the wagons are a bit bumpy over some points but the Class 25 takes them fine. I had a failed experiment with the DAS clay for ash ballast as if you're not super careful the chairs and rails get fouled, I'm not yet convinced its viable in 2mm. I'll keep trying on some test pieces. Link to comment Share on other sites More sharing options...
RMweb Gold MarshLane Posted September 22, 2019 RMweb Gold Share Posted September 22, 2019 9 minutes ago, RobA2345 said: I think I need a back to back gauge as some of the wagons are a bit bumpy over some points but the Class 25 takes them fine. I had a failed experiment with the DAS clay for ash ballast as if you're not super careful the chairs and rails get fouled, I'm not yet convinced its viable in 2mm. I'll keep trying on some test pieces. Yes would be worth checking the B2B - look forward to seeing some photos of your DAS clay test pieces. Rich Link to comment Share on other sites More sharing options...
sammyboy Posted September 22, 2019 Share Posted September 22, 2019 I like this! And I've also just pressed the 'follow' button so I can see more of your work! Sam Link to comment Share on other sites More sharing options...
RMweb Premium RobA2345 Posted November 4, 2019 Author RMweb Premium Share Posted November 4, 2019 Been attempting to ballast using Chris Nevards method of using DAS clay. Takes ages so I'm hoping the final result will be good. In the first image I've given it a light coat of matt black to get an idea of the blending for the final results. I plan on adding paint to the rail sides and sleepers so it's only an idea. Has anyone used this method before? 5 Link to comment Share on other sites More sharing options...
RMweb Gold MarshLane Posted January 2, 2020 RMweb Gold Share Posted January 2, 2020 Hi Rob, The ballasting looks quite interesting at the stage of your last photos - any further progress or updates? Rich Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now