woko Posted March 20, 2023 Share Posted March 20, 2023 On 14/03/2023 at 11:41, monkeysarefun said: Yeah I think thats because it fails to install pytorch3d but no real loss, like you said the .obj file still gets created. Heres a couple of tests I just did using that collab with a couple of images I found for Edwardian costumes on Etsy, works ok. Ohhh this is exciting, i need to get looking at this pronto then as I would be keen to print some Edwardian figures in 7mm for the club layout 1 Link to post Share on other sites More sharing options...
monkeysarefun Posted March 20, 2023 Author Share Posted March 20, 2023 3 hours ago, 5D_Stoke said: Many thanks, I've now tried that and it went through the first cell stage fine, but at the second stage, image to 3D mesh, when I thought I should be able to select a .png or .jpg file, I get the error message: NameError: name 'image_path' is not defined. Sorry, I have no bank of knowledge to know what's going on! Has it not loaded the program correctly? Try restarting the runtime (select the runtime menu option from across the top then select restart runtime) then try running the second step again. I do get errors and it all ends in a stack overflow (due to python3d which it needs in order to create the video rendering not installing successfully ) but it still creates an .obj file in the same directory that my image file is in. Also, click on the little directory icon down the left hand side, check pifhd is there and it has the sub-directory sample_images. Link to post Share on other sites More sharing options...
woko Posted March 20, 2023 Share Posted March 20, 2023 First attempt, with image straight from google Image from google Then I thought what if i change the background colour a bit, and levels in photoshop to see if i can get a better result! Image after slight manipulation darking levels and adding a darker background to help push the contrast between the figure and the background hoping to get a better read for the model Slightly more detail comes through now around the hands as you can see, but still missing some geometry which is annoying so I thought I would try a bit more image editing to see if it helped. I put in a slight gradient in the background, and coloured the sleeves to help make them more readable i hope? image amended slightly And then finally we are getting more detail to the figure I think i might keep this one, see if I can clean her up slightly in Zbrush and have a go at printing her at 7mm 4 1 Link to post Share on other sites More sharing options...
5D_Stoke Posted March 20, 2023 Share Posted March 20, 2023 2 minutes ago, woko said: First attempt, with image straight from google Image from google Then I thought what if i change the background colour a bit, and levels in photoshop to see if i can get a better result! Image after slight manipulation darking levels and adding a darker background to help push the contrast between the figure and the background hoping to get a better read for the model Slightly more detail comes through now around the hands as you can see, but still missing some geometry which is annoying so I thought I would try a bit more image editing to see if it helped. I put in a slight gradient in the background, and coloured the sleeves to help make them more readable i hope? image amended slightly And then finally we are getting more detail to the figure I think i might keep this one, see if I can clean her up slightly in Zbrush and have a go at printing her at 7mm Wow, that is a superb result, will redouble efforts to get it to work for me tomorrow. Victorian and Edwardian figures are exactly what I want to create, plus possibly WW1 military. 1 Link to post Share on other sites More sharing options...
woko Posted March 20, 2023 Share Posted March 20, 2023 Just now, 5D_Stoke said: Wow, that is a superb result, will redouble efforts to get it to work for me tomorrow. Victorian and Edwardian figures are exactly what I want to create, plus possibly WW1 military. Haha me too chap, exactly what I am after Victorian and Edwardian figures so happy to let you have any figures that come out good sir? Perhaps we could set up some kind of figure dump for folks who don't mind sharing their meshes for others to potentially use :) 1 Link to post Share on other sites More sharing options...
monkeysarefun Posted March 20, 2023 Author Share Posted March 20, 2023 (edited) 31 minutes ago, woko said: Haha me too chap, exactly what I am after Victorian and Edwardian figures so happy to let you have any figures that come out good sir? Perhaps we could set up some kind of figure dump for folks who don't mind sharing their meshes for others to potentially use :) Thats excellent - how many vertices? The few Ive played around with have 50 or 60,0000. How did the back come out? Some caveats The AI is programmed to recognise standing figures, and they must obviously be front facing so I'm not sure how sitting ones would come out... Black and white photos dont come out as well as coloured though given your results maybe tampering with the contrast and levels would help. Edited March 21, 2023 by monkeysarefun 1 Link to post Share on other sites More sharing options...
woko Posted March 21, 2023 Share Posted March 21, 2023 Just now, monkeysarefun said: Thats excellent - how many vertices? The few Ive played around with have 50 or 60,0000. How did the back come out? The AI only recognises standing figures so I'm not sure how sitting ones would come out... Verts are around 70k, I just knocked this one up playing around with the background I have noticed that gradients seem to work a little better, and finding the best contrast for the background to the figure. For instance if the figure is darker at top make the gradient lighter, at the top, and bit darker at the bottom! Still not bang on, the right hand on this little chap is a bit dodge but i can perhaps rub that down a bit we shall see or continue to try and buff out in zbrush! 1 Link to post Share on other sites More sharing options...
BG John Posted March 21, 2023 Share Posted March 21, 2023 I must add trying this to my To-Do list, as I'm after Victorian/Edwardian figures too. Has anyone tried rigging them in Blender to make different poses? I think this should be possible. This is also something I want to try, but am still trying to get my head round starting in Blender! Link to post Share on other sites More sharing options...
noiseboy72 Posted March 22, 2023 Share Posted March 22, 2023 I found a nice gentleman in his top hat and he worked out quite well through the 2D - 3D app. I did have to tidy up his hat, but that was about it. It's actually a fancy dress costume, but it still works very well. Pictured here printed to 7mm, along with a rather lovely sarcophagus that's in the grounds of Kingston Lacy house in Dorset. I did a quick lap around it and captured about 40 photos, before uploading them to Kiriengine and creating a really nice little model. The American student - Annie has now been painted, so I've added her to the shot as well. 3D viewing links here: https://www.kiriengine.app/share/ShareModel?code=AM34IJ&serialize=fddf1f2720bb41ed8a2fb32afa1f645d https://www.kiriengine.app/share/ShareModel?code=AM34IJ&serialize=764c08e4f4904889803e0f8794363e62 I updated my old original Mars printer with a new mono LCD and Mars 2 firmware. It's more than halved the print times and uses the more efficient .ctb files, so the processing and Z lift control is much improved. Less than 2 hours to print out both models - something that would have taken 5 with the old screen and firmware. 1 Link to post Share on other sites More sharing options...
RMweb Gold RedgateModels Posted March 22, 2023 RMweb Gold Share Posted March 22, 2023 I spy a flex hinge in the background 😉 Link to post Share on other sites More sharing options...
noiseboy72 Posted March 22, 2023 Share Posted March 22, 2023 13 minutes ago, RedgateModels said: I spy a flex hinge in the background 😉 One of 12 I've printed out today for butcher's scales apparently... 1 Link to post Share on other sites More sharing options...
RMweb Gold RedgateModels Posted March 22, 2023 RMweb Gold Share Posted March 22, 2023 22 minutes ago, noiseboy72 said: One of 12 I've printed out today for butcher's scales apparently... I shall share my collection of little people you have printed for me once Royal Fail get them to me and I can get the paints out 😁 1 Link to post Share on other sites More sharing options...
noiseboy72 Posted March 23, 2023 Share Posted March 23, 2023 On 20/03/2023 at 23:25, woko said: First attempt, with image straight from google Image from google Then I thought what if i change the background colour a bit, and levels in photoshop to see if i can get a better result! Image after slight manipulation darking levels and adding a darker background to help push the contrast between the figure and the background hoping to get a better read for the model Slightly more detail comes through now around the hands as you can see, but still missing some geometry which is annoying so I thought I would try a bit more image editing to see if it helped. I put in a slight gradient in the background, and coloured the sleeves to help make them more readable i hope? image amended slightly And then finally we are getting more detail to the figure I think i might keep this one, see if I can clean her up slightly in Zbrush and have a go at printing her at 7mm This was my attempt from your picture... Main problem looks to be hands and feet. I've added her a peg leg, which should be OK up to 7mm, but I might need to graft on some hands from another model. 1 Link to post Share on other sites More sharing options...
noiseboy72 Posted March 24, 2023 Share Posted March 24, 2023 On 22/03/2023 at 18:06, noiseboy72 said: I found a nice gentleman in his top hat and he worked out quite well through the 2D - 3D app. I did have to tidy up his hat, but that was about it. It's actually a fancy dress costume, but it still works very well. Pictured here printed to 7mm, along with a rather lovely sarcophagus that's in the grounds of Kingston Lacy house in Dorset. I did a quick lap around it and captured about 40 photos, before uploading them to Kiriengine and creating a really nice little model. The American student - Annie has now been painted, so I've added her to the shot as well. 3D viewing links here: https://www.kiriengine.app/share/ShareModel?code=AM34IJ&serialize=fddf1f2720bb41ed8a2fb32afa1f645d https://www.kiriengine.app/share/ShareModel?code=AM34IJ&serialize=764c08e4f4904889803e0f8794363e62 I updated my old original Mars printer with a new mono LCD and Mars 2 firmware. It's more than halved the print times and uses the more efficient .ctb files, so the processing and Z lift control is much improved. Less than 2 hours to print out both models - something that would have taken 5 with the old screen and firmware. A quick photo update following painting.. 4 Link to post Share on other sites More sharing options...
5D_Stoke Posted March 24, 2023 Share Posted March 24, 2023 On 20/03/2023 at 23:34, woko said: Haha me too chap, exactly what I am after Victorian and Edwardian figures so happy to let you have any figures that come out good sir? Perhaps we could set up some kind of figure dump for folks who don't mind sharing their meshes for others to potentially use :) I have had some limited success with this yesterday on one test photo, here is the resulting .obj file (green image from Netfabb) and then tidied up (grey photos) with a few minutes work in Blender (which I am fortunately fairly familiar with at a basic level of sculpting and revising figures created in other programs). I've not tried 3D printing her yet but that should be relatively straightforward. This program does look like it offers a relatively quick way to generate standing figures in 4mm scale (or smaller) that would look good enough painted, but attempts to get it to work with sitting or more complicated figures failed completely. The mesh is reasonably fine but the program creates all sorts of anomalies, e.g. hands vary from quite well defined to non-existent (as on this example pictured - the right hand is decent, left one missing from the elbow!). Over 4mm scale they are a bit too basic. For sitting and more complicated 4mm figures I have used DAZ, and also MakeHuman, and these give superb detail for 7mm and 16mm figures that I also print, but such programs are a huge learning curve to get usable outputs and there are frustrating limits in how much my laptop will cope with to export and fix the files for 3D printing, so I was rather hopeful of making something quicker and easier this way. The technology can only improve, thanks for sharing it! If I manage any better ones I will share them on here. Link to post Share on other sites More sharing options...
woko Posted March 25, 2023 Share Posted March 25, 2023 8 hours ago, 5D_Stoke said: I have had some limited success with this yesterday on one test photo, here is the resulting .obj file (green image from Netfabb) and then tidied up (grey photos) with a few minutes work in Blender (which I am fortunately fairly familiar with at a basic level of sculpting and revising figures created in other programs). I've not tried 3D printing her yet but that should be relatively straightforward. This program does look like it offers a relatively quick way to generate standing figures in 4mm scale (or smaller) that would look good enough painted, but attempts to get it to work with sitting or more complicated figures failed completely. The mesh is reasonably fine but the program creates all sorts of anomalies, e.g. hands vary from quite well defined to non-existent (as on this example pictured - the right hand is decent, left one missing from the elbow!). Over 4mm scale they are a bit too basic. For sitting and more complicated 4mm figures I have used DAZ, and also MakeHuman, and these give superb detail for 7mm and 16mm figures that I also print, but such programs are a huge learning curve to get usable outputs and there are frustrating limits in how much my laptop will cope with to export and fix the files for 3D printing, so I was rather hopeful of making something quicker and easier this way. The technology can only improve, thanks for sharing it! If I manage any better ones I will share them on here Thanks for posting I agree I think for 4mm this program would work okish but for the larger scales the detail isn’t there! I need to look at make human not had a chance to yet! It’s getting the attire/clothes for the characters I want which is the issue! Sadly they don’t really cater for the Victorian/Edwardian period! :( 8 hours ago, 5D_Stoke said: Link to post Share on other sites More sharing options...
RMweb Gold RedgateModels Posted March 25, 2023 RMweb Gold Share Posted March 25, 2023 Kiri Engine is your friend, here's me in 7mm scanned by @noiseboy72 at the Mansfield Model Railway Show earlier this month 😁 3 Link to post Share on other sites More sharing options...
RMweb Gold RedgateModels Posted March 25, 2023 RMweb Gold Share Posted March 25, 2023 So my mini me is joined by my sons. Unlike my good self they have been created from the following photo removebg used and individual images created. Still a bit more painting to do, although Josh has been brought more up to date with the beard he now sports 6 Link to post Share on other sites More sharing options...
RMweb Gold RedgateModels Posted March 26, 2023 RMweb Gold Share Posted March 26, 2023 All finished, just need SWMBO scanning ….. 4 Link to post Share on other sites More sharing options...
RMweb Gold RedgateModels Posted July 24, 2023 RMweb Gold Share Posted July 24, 2023 Is anyone else having problems with the image to 3D site? seems to error after uploading the image. Link to post Share on other sites More sharing options...
RogerTE Posted July 29, 2023 Share Posted July 29, 2023 On 24/07/2023 at 09:07, RedgateModels said: Is anyone else having problems with the image to 3D site? seems to error after uploading the image. Yes that's what I keep getting. Link to post Share on other sites More sharing options...
RMweb Gold RedgateModels Posted July 29, 2023 RMweb Gold Share Posted July 29, 2023 (edited) Think the first part is not loading right, don't know how to report it etc though Edited July 29, 2023 by RedgateModels Link to post Share on other sites More sharing options...
RMweb Gold RedgateModels Posted August 3, 2023 RMweb Gold Share Posted August 3, 2023 The original link still seems to work though, subject to editing the wget line as described in the first posting Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now