robrailltd Posted May 6, 2011 Share Posted May 6, 2011 First up I'll be using both old and new Grafar products aswell as Dapol stuff. so my thinking is code 80. however i need a double slip. my understanding is they are in code 55 only is this correct and will it cause many issues having code 55 and 80 together? any planning help would be much appreciated. Link to post Share on other sites More sharing options...
Karhedron Posted May 6, 2011 Share Posted May 6, 2011 I would strongly suggest using code 55 throughout. It looks better and is much stronger as the bottom 30% of the rail is buried in the sleeper plastic. You will not have any problems using old GraFar stock on it due to the way it is made. The buried rail means that the chairs are just cosmetic. The upshot of this is that even old stock with deep flanges will run quite happily on code 55. Personally I think that code 80 is fit only for fiddle yards (if at all). Link to post Share on other sites More sharing options...
robrailltd Posted May 6, 2011 Author Share Posted May 6, 2011 Thank you for that. I wasn't sure 55 was compatible with older stock. Link to post Share on other sites More sharing options...
RMweb Premium Kris Posted May 7, 2011 RMweb Premium Share Posted May 7, 2011 You need to have some very very old rolling stock (30years +) for it not to work on code55. Link to post Share on other sites More sharing options...
robrailltd Posted May 7, 2011 Author Share Posted May 7, 2011 fair enough. i think nothing will be older than late Poole farish so jobs a good un. cheers gents much aprreciated Link to post Share on other sites More sharing options...
grahame Posted May 7, 2011 Share Posted May 7, 2011 fair enough. i think nothing will be older than late Poole farish .... besides if you find the odd bit of stock with flanges that are troublesome you'll probably be able to easily change them for the later finer profile ones. It's the other makes of code 55 track (like Atlas) that you'll have problems with. Peco code 55 is cunningly designed as already mentioned. It's probably worthwhile considering changing the older wheels anyway as they look quite horrendous and shiny; unlike the later blackened ones. Replacement wheels are quite cheap and although Bachmann (and dealers/stockists) are out of stock of the coach wheels other makes are available and will fit. The NGS sells them; if you're not a member it's well worth joining. G. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.