Ian G Posted January 28, 2012 Share Posted January 28, 2012 I am after a source or supplier of tank ends for a little 7mm project, the tanks are 4'-6'' or 31mm to scale, these are for demountable tanks, as I have no 4mm stock left to check, can anyone tell me if there is a suitable 4mm tanker available that i could use. Ian G Link to post Share on other sites More sharing options...
Tel2010 Posted January 28, 2012 Share Posted January 28, 2012 Hi Ian Not used this site but added it to my bookmarks a while back,they do various domes, tubing etc. http://www.ema-models.co.uk/ Hope its of some use if you cant find a suitable doner model Tel Link to post Share on other sites More sharing options...
woodyfox Posted January 29, 2012 Share Posted January 29, 2012 Someone on here in the 7mm section used the curved inner base of drinks cans filed down. They made a reasonable tank end. Regards Stu Link to post Share on other sites More sharing options...
Rob Pulham Posted January 29, 2012 Share Posted January 29, 2012 Hi Ian, there is an eliptical domed end of 31.8mm diameter on the site that Tel (thanks Tel) posted. About half way down the page. Link to post Share on other sites More sharing options...
Ian G Posted January 30, 2012 Author Share Posted January 30, 2012 Thank you for this info,I will be finishing some of my projects, studying for a degree in mid life takes its toll on the fun side of life. Ian G Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.