Sir Madog Posted October 18, 2013 Share Posted October 18, 2013 For a number of family-related reasons I had to put my layout project "Schietwedderooger Kleinbahn" - 7mm narrow gauge layout in a box - to sleep. I am now able to pick it up again, reworked the plan a little and am now in the process of securing the material I need to start construction. Here is what it is going to look like: Link to post Share on other sites More sharing options...
Jack00 Posted October 18, 2013 Share Posted October 18, 2013 Very nice plan. Nice visuals aswel to give us an idea of the plans intended. Good luck with it Cheers Jack. Link to post Share on other sites More sharing options...
corax67 Posted October 18, 2013 Share Posted October 18, 2013 I like the look of this plan - how big is this small layout ?? Link to post Share on other sites More sharing options...
Jeff Smith Posted October 18, 2013 Share Posted October 18, 2013 The plan says 800mm by 500mm - I assume this is the scenic part? Link to post Share on other sites More sharing options...
Sir Madog Posted October 19, 2013 Author Share Posted October 19, 2013 The plan says 800mm by 500mm - I assume this is the scenic part? Yes, this is correct! The fiddle yards can be disconnected, for ease of transport. I have got all the track and points for this layout. This may be a stupid question to ask, but this is my first time of using Peco "Electrofrog" points - I did not get the "Insulfrog" kind. How on earth do I wire those? I do not intend to use the Peco point motors, but operate them manually. Link to post Share on other sites More sharing options...
corax67 Posted October 19, 2013 Share Posted October 19, 2013 Failed to see the dimensions (oops) but for all things wiring then Brian Lambert's site is hard to fault http://www.brian-lambert.co.uk Link to post Share on other sites More sharing options...
georgeT Posted October 19, 2013 Share Posted October 19, 2013 Morning Ulrich, Love the idea of two fiddle yards, makes it so much more interesting. GT Link to post Share on other sites More sharing options...
Sir Madog Posted October 19, 2013 Author Share Posted October 19, 2013 2 mm plywood and DAS modelling clay are on order now - I should get them by mid of next week. Here is an update on my little Deutz Diesel: I am not yet happy with that red of the chassis, but with a good dose of grime and rust I think it´ll look OK. The body will also see quite a lot of rust - those critters were never well kept! Link to post Share on other sites More sharing options...
Sir Madog Posted October 23, 2013 Author Share Posted October 23, 2013 Well, the plywood and the DAS clay has not yet arrived, so I reworked the drawings of the background buildings, just to adapt them to doors and windows I salvaged from a former project. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.