Wrighty Posted September 8, 2014 Share Posted September 8, 2014 As in the standard 3 seat cab tipper, but do you want twin rear wheels or single, also do you want network rail or a plain colour? Would be possible, not to difficult.20140907_145718.jpg Hi, Yes the standard 3 seat cab is what I am after. Twin rear wheels would be preferred, but not essential. I would like it to be Network Rail livery, however plain white is fine as I can easily add decals myself. Looking at the photos that Merf has posted, I would prefer the rear to be similar to the last pic with the tailgate. Kind regards Chris Link to comment Share on other sites More sharing options...
tamperman36 Posted September 8, 2014 Author Share Posted September 8, 2014 I can feel a couple of projects coming on, two standard drop sides and one with a sloping rear end. Watch out for further progress. Link to comment Share on other sites More sharing options...
RMweb Premium PhilJ W Posted September 8, 2014 RMweb Premium Share Posted September 8, 2014 I can feel a couple of projects coming on, two standard drop sides and one with a sloping rear end. Watch out for further progress. You mean a beavertail, Oxford already make one but with a Transit Mk1 cab. Link to comment Share on other sites More sharing options...
tamperman36 Posted September 8, 2014 Author Share Posted September 8, 2014 The oxford model is the straight forward car carrying bed, I would think that the network rail van has a solid floor and if you look at the picture it has three dropside including one at the rear above the slope. I would imagine these are for carrying a small rail mounted trolley and if so do they have a winch mounted on the headboard? Link to comment Share on other sites More sharing options...
RMweb Premium PhilJ W Posted September 9, 2014 RMweb Premium Share Posted September 9, 2014 The oxford model is the straight forward car carrying bed, I would think that the network rail van has a solid floor and if you look at the picture it has three dropside including one at the rear above the slope. I would imagine these are for carrying a small rail mounted trolley and if so do they have a winch mounted on the headboard? It would be quite easy to fit floors and sides to it. Some people have simply replaced the cab with a more modern example, often using the RM/RAC van cab as mentioned above. Link to comment Share on other sites More sharing options...
tamperman36 Posted September 9, 2014 Author Share Posted September 9, 2014 Its about time oxford produced the low roof short wheelbase transit in plain white, however I believe there are no plans for this at the moment so I will have to aquire some more RM/RAC models. I think the RAC is looking most likley then I will have some light bars for the spares box. Link to comment Share on other sites More sharing options...
tamperman36 Posted September 10, 2014 Author Share Posted September 10, 2014 Some more rail company vehicles, NOT network rail though. First up is a 17 tonne scania tanker based on a photo I found however the real vehicle is a DAF . This was built using a carama demountable recovery wagon,, I removed the rear bodywork and added the tank from an old herpa tanker found in the scrap box. I also added the pipe runs which were made from strips of plastic then added paint and transfers. Last was to add the hoses from some yellow wire. Second vehicle is a 7.5 tonner which is a could have been. It was built using a carama 1/80th scale merc which I then fitted it onto a scrap carama chassis. I added the body which was built using a pair of white metal curtain sides from an old Model Bus Company kit, the rear doors are knightwing and the rest of the body was built from plastic sheet. The cab roof wind deflector was from herpa also found in the scrap box. Paint and transfers finished it off. Link to comment Share on other sites More sharing options...
Wrighty Posted September 10, 2014 Share Posted September 10, 2014 Fantastic models, very impressive! Link to comment Share on other sites More sharing options...
MatthewEWS Posted September 14, 2014 Share Posted September 14, 2014 Hi Simon, Have you seen or have any pictures of a NR Arctic? I am looking to see if one exists for reference to an upcoming project. Thanks Matthew Link to comment Share on other sites More sharing options...
tamperman36 Posted September 14, 2014 Author Share Posted September 14, 2014 Not seen any yet, however if you check out ontrackplant.com and look up rail grinders you will find a roadrail artic grinder with an M.A.N tracter unit. This is on my to do list once I have sourced some parts Link to comment Share on other sites More sharing options...
MatthewEWS Posted September 14, 2014 Share Posted September 14, 2014 Hi, Great models by the way. Just wondering Where have you got the HIAB cranes from? Matthew Link to comment Share on other sites More sharing options...
tamperman36 Posted September 15, 2014 Author Share Posted September 15, 2014 I got some many years ago from Roco as a seperate detail part. You get 2 in a pack. I got some other hiabs from Kibri, many years ago they made a kit for an artic loaded with hiabs. It had about 6 on the trailer as a load. You can also get Atlas cranes and hiabs from Herpa as add on detail parts. Link to comment Share on other sites More sharing options...
St. Simon Posted September 18, 2014 Share Posted September 18, 2014 Hi Simon, Have you seen or have any pictures of a NR Arctic? I am looking to see if one exists for reference to an upcoming project. Thanks Matthew Matt, I'm afraid I haven't, as there's only one for the whole country, it won't have been photographed much, but I'll have a look when I'm in the office on Tuesday for some photos and I'll have a look when I'm travelling! Simon Link to comment Share on other sites More sharing options...
SGJ Posted November 16, 2014 Share Posted November 16, 2014 This is very useful, its one aspect of railway modelling that is entreating to some and overlooked by others, a real eye opener ! Link to comment Share on other sites More sharing options...
David Todd Posted November 21, 2014 Share Posted November 21, 2014 Hi Simon, Have you seen or have any pictures of a NR Arctic? I am looking to see if one exists for reference to an upcoming project. Thanks Matthew An...................... EWS one Link to comment Share on other sites More sharing options...
St. Simon Posted November 25, 2014 Share Posted November 25, 2014 A couple a pieces of plant next. First a Liebherr excavater which is a standard schuco model with network rail logos added.20140904_095718.jpg Now we have a JCB Loadhaul, totally scratch built. The wheels are cast white metal from Langley models,the seat and stearing wheel I found in the scrap box. The rest is built from plastic sheet. The transfers were drawn on microsoft paint and printed by me20140904_095733.jpg Hi, As lovely as they are, Network Rail don't have any construction vehicles, they are a maintenance company, and so we don't have the need to own Road Rail Plant, for major construction projects, contractors are used and they have their own plant, and they each have there own logos on them. Simon Link to comment Share on other sites More sharing options...
tamperman36 Posted November 25, 2014 Author Share Posted November 25, 2014 I will correct that issue over Christmas then, just have to create some new transfers and put them on. Thanks for letting me know. Link to comment Share on other sites More sharing options...
Fat Controller Posted November 26, 2014 Share Posted November 26, 2014 Amongst others, look for vehicles owned by Gamble (originally based in Hailsham, but now to be seen at a lot of locations); latterly taken over by Keltbray. This link has a lot of views of Keltbray plant:- http://www.ontrackplant.com/road-railers/keltbray-rail Then there's this firm:- http://www.apwebbplanthire.co.uk/railexc.htm and these:- http://www.txmplant.co.uk/our-fleet/ whilst who could resist a firm with this name:- http://www.shovlin.co.uk/index_2.htm Link to comment Share on other sites More sharing options...
MatthewEWS Posted November 26, 2014 Share Posted November 26, 2014 www.ontrackplant.com is also a good reference website. You will need to make a account to make full use of the site. It has many pictures of plant and other equipment. Stobart Rail also own a lot of plant. It may be worth checking them out Matthew Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.