class"66" Posted December 11, 2014 Author Share Posted December 11, 2014 Not signals as such,but ive made these Sankey signs up on plastic card and posts.... 3 Link to post Share on other sites More sharing options...
class"66" Posted December 13, 2014 Author Share Posted December 13, 2014 Little bit more done tonight on my samphores.. Ive now used metal ladders from some old Hornby signals, and made use of double track gantry too.... 1 Link to post Share on other sites More sharing options...
RMweb Gold griffgriff Posted December 13, 2014 RMweb Gold Share Posted December 13, 2014 Your 3 post bracket looks a little strange with 2 home signal arms on the same post. There were of course coacting arms on the same post for sighting reasons but this doesn't seem to be the case here? Nice work all the same. 1 Link to post Share on other sites More sharing options...
Shed Driver Posted December 13, 2014 Share Posted December 13, 2014 A small observation: on semaphore signals the lens for showing clear was not green but BLUE. A blue filter plus the yellow flame fron the oil lamp gives the green light Norman Link to post Share on other sites More sharing options...
class"66" Posted December 13, 2014 Author Share Posted December 13, 2014 Cheers for your information Norman. cheers neil. Link to post Share on other sites More sharing options...
LNERGE Posted December 14, 2014 Share Posted December 14, 2014 Your 3 post bracket looks a little strange with 2 home signal arms on the same post. There were of course coacting arms on the same post for sighting reasons but this doesn't seem to be the case here? Nice work all the same. Have a look at this for arms on the same post.. 5/8/9 signal or perhaps the gantry that carries distants 28/39 Something seems amiss with the disc on the bracket however.. Link to post Share on other sites More sharing options...
class"66" Posted December 14, 2014 Author Share Posted December 14, 2014 (edited) Thanks wil have good look over this now... cheers neil.. Edited December 14, 2014 by class"66" Link to post Share on other sites More sharing options...
class"66" Posted December 14, 2014 Author Share Posted December 14, 2014 This samphore with ground signal on platform i copyed from some pictures I had of them. Ile find them and post them up Link to post Share on other sites More sharing options...
LNERGE Posted December 14, 2014 Share Posted December 14, 2014 (edited) The disc needs to move to the left a bit. The aperture for the light is right in the middle of the cube top top of the Ratio moulding. The representation on the lenses on the face should be positioned accordingly. These signals are also 'lower quadrant' too. Edited December 14, 2014 by LNERGE Link to post Share on other sites More sharing options...
michaelp Posted December 14, 2014 Share Posted December 14, 2014 Excellent work well done. Link to post Share on other sites More sharing options...
LNERGE Posted December 14, 2014 Share Posted December 14, 2014 (edited) I can't even see the guidelines on the Ratio disc face let alone paint them<g> Edited December 14, 2014 by LNERGE Link to post Share on other sites More sharing options...
RMweb Gold griffgriff Posted December 14, 2014 RMweb Gold Share Posted December 14, 2014 Have a look at this for arms on the same post.. 5/8/9 signal or perhaps the gantry that carries distants 28/39 Finsbury Park 5.JPG Something seems amiss with the disc on the bracket however.. As you are probably aware (judging by you avatar) the LNER used small arm shunt signals arranged in much the same way as the disk signals you have also illustrated. Could this be the case at Finsbury Park? I'm sure it would be unusual to have detonator equipment linked to a shunt signal but perhaps this was the case at this busy location? Perhaps it's some archaic GN installation? I'm not expert but I'm pretty sure this wouldn't have been the case on the LMS. Head's now over parapet Link to post Share on other sites More sharing options...
LNERGE Posted December 14, 2014 Share Posted December 14, 2014 I've had a quick search but found nothing but i'm sure there was something fairly big at the north end of Preston station that had lots of arms on one post? Link to post Share on other sites More sharing options...
Moggs Eye Posted December 14, 2014 Share Posted December 14, 2014 Having a number of stop signals on one post could be used at junctions on running lines in low speed areas or where sighting was poor or space limited. The top arm would apply to the left hand route and so on down the arm. I can't think of any extant examples off the top of my head, but Firsby in East Lincolnshire had one such signal as a starter from its bay platform. The top arm was for the Skegness branch and the lower for the main line towards Boston. Above is an example for my layout - the right hand post, partially hidden behind a colour light, is a platform starter. The top arm goes through the crossover and the first slip onto the main line while the lower arm indicates straight on into the branch. There's a disc at the foot of the signal controlling access into the sidings on the far left of the board. The same convention applies using short arm shunting signals, or discs - top arm, or disc, for the left hand route etc. Hope that helps. Good work with the signals, I can never get enough of modern trains with semaphores. Cheers, Ben. Link to post Share on other sites More sharing options...
RMweb Gold griffgriff Posted December 14, 2014 RMweb Gold Share Posted December 14, 2014 That's interesting... so if found in a low speed areas it does raise the question why they were linked to detonators at Finsbury Park. 1 Link to post Share on other sites More sharing options...
LNERGE Posted December 14, 2014 Share Posted December 14, 2014 That's interesting... so if found in a low speed areas it does raise the question why they were linked to detonators at Finsbury Park. Because the junctions ahead cannot be effectively flank protected. Link to post Share on other sites More sharing options...
RMweb Gold beast66606 Posted December 14, 2014 RMweb Gold Share Posted December 14, 2014 I've had a quick search but found nothing but i'm sure there was something fairly big at the north end of Preston station that had lots of arms on one post? Preston No.5 up and down signals there were also a couple at the South end controlled by Preston No.1 and No.2A Link to post Share on other sites More sharing options...
RMweb Gold beast66606 Posted December 14, 2014 RMweb Gold Share Posted December 14, 2014 This samphore with ground signal on platform i copyed from some pictures I had of them. Ile find them and post them up The LMS also had a habit of using ex LNWR miniature armed shunts when they were required to be on the main structure. Link to post Share on other sites More sharing options...
RMweb Gold TheSignalEngineer Posted December 14, 2014 RMweb Gold Share Posted December 14, 2014 That's interesting... so if found in a low speed areas it does raise the question why they were linked to detonators at Finsbury Park. There was a detonator placer linked with the Down Home from the WR at Bordesley Junction when we converted the chord to a passenger line in 1966. It was there because the box could give Line Clear to Bordesley South with a train crossing the junction which was less than 440 yards ahead. It was only about 20mph on the approach and on a rising gradient. I have a vague memory of a detonator placer associated with a colour light signal, I think it may have been on the Up line approaching Plymouth. Can anyone confirm? Link to post Share on other sites More sharing options...
RMweb Gold The Stationmaster Posted December 15, 2014 RMweb Gold Share Posted December 15, 2014 There was a detonator placer linked with the Down Home from the WR at Bordesley Junction when we converted the chord to a passenger line in 1966. It was there because the box could give Line Clear to Bordesley South with a train crossing the junction which was less than 440 yards ahead. It was only about 20mph on the approach and on a rising gradient. I have a vague memory of a detonator placer associated with a colour light signal, I think it may have been on the Up line approaching Plymouth. Can anyone confirm? There might have been at Plymouth but I can't be certain. However the North Eastern Region definitely installed detonator placers in some of their colour light signalling schemes although they were effectively 'one shot' devices as they used a standard Westinghouse signal motor (or 'backing machine' as it was called in Reading works). Three shot placers could be found at a number of placers on the GWR/WR and were basically installed in places where there was a potential SPAD risk emerging (I think in nearly all cases) from a platform line including bays. I have a complete list of all the early installations and the reason for providing them - but it is pre 1914. Link to post Share on other sites More sharing options...
class"66" Posted December 15, 2014 Author Share Posted December 15, 2014 (edited) I got the idea for using ground dics signals on gantrys,from these signals at Hastings railway station... Edited December 5, 2015 by class"66" 1 Link to post Share on other sites More sharing options...
class"66" Posted December 15, 2014 Author Share Posted December 15, 2014 (edited) Ive also come across this picture and info in my signal book. But the "best" information for (samphore signals) is from you chaps on here So big thank you to all for your super information... Cheers neil.. Edited December 15, 2014 by class"66" Link to post Share on other sites More sharing options...
RMweb Gold TheSignalEngineer Posted December 15, 2014 RMweb Gold Share Posted December 15, 2014 (edited) There might have been at Plymouth but I can't be certain. However the North Eastern Region definitely installed detonator placers in some of their colour light signalling schemes although they were effectively 'one shot' devices as they used a standard Westinghouse signal motor (or 'backing machine' as it was called in Reading works). Three shot placers could be found at a number of placers on the GWR/WR and were basically installed in places where there was a potential SPAD risk emerging (I think in nearly all cases) from a platform line including bays. I have a complete list of all the early installations and the reason for providing them - but it is pre 1914. I've found the reference to the ones at Plymouth, they were Clayton machines worked from the panel at Cornwall Loop Junction. See page 16 of this notice http://www.signallingnotices.org.uk/scans/559/B%201165.pdf Royal Albert Bridge and Saltash boxes had three-shot machines put in when the Token working across the RAB was taken out in 1961. These were moved on and off the track by the rodding controlling the points at the ends of the single line. http://www.signallingnotices.org.uk/scans/3881/B%201181%20Royal%20Albert%20Bridge%20&%20Saltash%201961.pdf Edited December 15, 2014 by TheSignalEngineer Link to post Share on other sites More sharing options...
class"66" Posted December 18, 2014 Author Share Posted December 18, 2014 Ive now altered this two arm semaphore on my gantry,big top arm followed by small low arm.. Link to post Share on other sites More sharing options...
RMweb Gold beast66606 Posted December 18, 2014 RMweb Gold Share Posted December 18, 2014 <pedant> Swap the two small arms around and it's fine. The horizontal striped arm is either call on, shunt ahead or Warning - it's always used in connection with a main arm, so on your signal should be on the right or middle doll. The miniature arm on the right hand doll is correct but more unusual (although by no means uncommon) under a main arm, it would be better swapped with the left hand miniature arm. <\pedant> It's your signal of course. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now