-
Posts
8,438 -
Joined
-
Days Won
13
Content Type
Profiles
Forums
Blogs
Gallery
Events
Exhibition Layout Details
Store
Everything posted by martin_wynne
-
Is track building making a come back
martin_wynne replied to hayfield's topic in Handbuilt Track & Templot
Hi John, They might not fetch such good prices after the next Templot release in a week or two. It will then be possible to FDM-print filing jigs for any angle from Templot 3D files: Material cost for such a jig is about £1.50 if you have or know someone with an FDM 3D printer. Such printers can be had for the price of an 00 RTR locomotive. And used for a lot more than just filing jigs. The jigs for filing the switch blades will be a bit more because they are longer. If the vee rails are filed and polished using these jigs to match exactly the angle of the plug track chairs, they fit snugly together in the chairs and don't need soldering together to make a one-piece vee (same as in the Finetrax kits). The rails just need a little cyano superglue or whatever on them somewhere to prevent them sliding out of position. p.s. the grey colour is PLA Plus toughened FDM filament, it is not a resin print. cheers, Martin. -
-
Level crossing stupidity...
martin_wynne replied to Katier's topic in UK Prototype Discussions (not questions!)
. -
Level crossing stupidity...
martin_wynne replied to Katier's topic in UK Prototype Discussions (not questions!)
https://www.bbc.co.uk/news/av/uk-66498265 -
Rejoiner - Advice & Tips sought
martin_wynne replied to RCP's topic in Modelling Questions, Help and Tips
Hi Jol, I may have exaggerated slightly. I do know of a couple. 🙂 Sure you can buy baseboards, but they are not cheap. This is a topic from a raw beginner -- he needs to know what the important issues are before being given possible solutions. For P4, baseboards are definitely an issue. I don't really think it is fair to a beginner to start suggesting P4 when he is still at the stage of discussing Peco set-track. Let folks learn to walk before telling them they ought to be running. 00 RTR on 00-SF Finetrax turnout kits would be a good step up from Peco. Many fine layouts have been and are being built that way. Martin. -
Rejoiner - Advice & Tips sought
martin_wynne replied to RCP's topic in Modelling Questions, Help and Tips
Hi Jol, Building models and trackwork probably isn't much more difficult in P4 -- but building baseboards is definitely more difficult in P4. A successful P4 layout requires good carpentry skills above all else, especially for a portable layout with tracks crossing baseboard joints. Those P4 wheel flanges are tiny, and even tinier after accumulating any dirt on the wheels. Baseboards need to be dead flat, and baseboard joints must align perfectly every time. The planet is littered with abandoned P4 layouts where the baseboards sagged or warped, or with a baseboard joint which derailed everything which tried to get across it. 🙂 Martin. -
Rejoiner - Advice & Tips sought
martin_wynne replied to RCP's topic in Modelling Questions, Help and Tips
You are not wrong. Many/most 00-SF modellers use ordinary code 75 flexi-track for their plain track. For pointwork, a range of easy-build Finetrax pointwork kits is available for 00-SF: https://www.britishfinescale.com/ You should completely ignore and disregard suggestions that 00-SF is worse than standard 00 because the track gauge (16.2mm) is even smaller. No-one can see that difference without measuring it -- but they can and will notice that the narrower flangeways look much more realistic, and notice the improved running with kit wheels. More about 00-SF at: https://85a.uk/00-sf/ cheers, Martin. -
-
Hi John, Using plug track it's not really necessary to solder the vees. If the rails are filed to the accurate angles using the 3D-printed filing jig, they will fit snugly together in the chairs (as on the Finetrax kits). If you think soldering is important, the resin chairs will resist soldering heat if you are quick with solder cream (SMT paste) to solder them in situ. Or they can be sealed with penetrating cyano or some other sealant. Or with epoxy afterwards from below if building on the bench. Having finally got all the V-crossing chairs done, we are now at the stage of learning all the tips and tricks of building plug track. The 3D computer files for the filing jigs (any angle) will be available from the next Templot update in a few days time. Any model railway club should have an FDM printer available for members to use.🙂 This is the toughened filament needed for the filing jigs (also used for the timbering bases). 1 reel will make about 15 filing jigs: https://www.amazon.co.uk/gp/product/B07FQ75QG2 cheers, Martin.
-
Hi Paul, Lez, If you have access to an FDM (filament) 3D printer, you will soon be able to print any size of filing jig, for both switch blades and vee crossings, using 3D files exported from Templot: The filament to use is toughened PLA PLus, which a file just skids across. These jigs are good for a couple of dozen vees, and since they cost only about £1 for material, if it does wear out you can simply print another one. The M6 bolts are likely to cost more than the jig. Will be in the next Templot update in a few days time. No CAD program or CAD skills needed, the files are ready for printing. cheers, Martin.
-
As instructed, I wrote "not in use" on the back of it, and signed my name.
-
They couldn't be much closer: https://www.openstreetmap.org/way/17272404#map=18/52.47907/-1.89078 Martin.
-
-
-
In that case, how are we to know that it's not in use?
-
Seen in the sits-vac in the local paper a few years ago: "We have several vacancies for Edible Oil Technologists".
-
We shouldn't denigrate Norman wisdom.
-
Hi Dave, See my previous post, but swap over the green and pink: https://www.rmweb.co.uk/topic/160234-using-the-easy-assembly-finetrax-pointwork-kits-in-00-and-em-and-possibly-p4/?do=findComment&comment=4701029 i.e. snip out and remove the green ones. Snip through the pink ones and lock them to the curve with a hot glue gun. cheers, Martin.
-
Urgent Safety Message from RAIB
martin_wynne replied to martin_wynne's topic in UK Prototype Discussions (not questions!)
RAIB have just posted a video about the Spital Junction incident: Report released today: https://www.gov.uk/government/news/report-062023-train-overspeeding-at-spital-junction Martin. -
Interesting to watch again this video from 10 months ago.
-
-