Jump to content
 

5&9Models

Members
  • Posts

    661
  • Joined

  • Last visited

Blog Entries posted by 5&9Models

  1. 5&9Models

    London & Birmingham Carriages
    I’ve long been entertained and intrigued by depictions of early railways of the 1830s and ‘40s. The period was marked by significant political and social change, the technology of the new iron roads symbolised these changes more than anything and the railway companies knew it. From the opening of the Liverpool & Manchester Railway onwards, artists such as Isaac Shaw, John Cooke Bourne, Thomas Talbot Bury and many others recorded what they saw, creating images that sought to commemorate and impress. From these illustrations lithographic prints were produced and distributed in quantity, in a way a form of propaganda, promoting the grandeur and unprecedented architectural and engineering achievements of the railways whilst at the same time demonstrating how harmoniously they would sit within the landscape, showing just how marvellous (and safe) it would be to travel by train.
     
    The detail and accuracy of many images is praiseworthy, Shaw was a skilled engraver, Bourne a talented artist and Bury a noted architect however, some images must be taken with a full chip shop’s worth of salt, and a few would not look out of place hanging in a gallery of work by Salvador Dali. Therefore, one must never rely on such pictures as a clear window into the past but in the absence of photographs or files full of detailed and fully dimensioned drawings, they are all we have. 
     

    Fig. 1. Detail of ‘The entrance to the tunnel at Watford’ by T. T. Bury, engraved by N. Fielding, published by Ackermann, London, 1837. 
     
    The subject of this article is an oddity I noticed many years ago in a charming painting by T. T. Bury showing an impressive cutting on the London & Birmingham Railway. The little engine processes gaily towards the Watford tunnel entrance blissfully unaware that it is on the wrong line pulling eight open carriages, little more than trucks with seats, four enclosed second- and first-class carriages bringing up the rear. Sandwiched between these is one carriage which appears to be another open third but with raised full-height ends. Not only that, two passengers, apparently a couple, stand at seat back height looking forward down the train to the locomotive and the approaching tunnel. Trains in this period seldom reached speeds in excess of 25mph or so, but even at this pace standing on the end of the carriage would seem to be an extremely hazardous thing to do. Momentary loss of footing could result in serious injury, even death. Surely a flight of fancy on the part of the usually reliable artist I thought - but no. Buried in the London & Birmingham Railway minute books held at the National Archives is a short sentence that goes a long way to confirm that Thomas Talbot Bury was not pulling our legs. Dated 17th April 1837, minute 81 reads ‘Ordered - that Mr Bagster be authorised to give additional height to the ends of one or more of the third class carriages.’ It seems that this instruction was indeed carried out and remarkably Bury recorded one of these rare vehicles. Those familiar with my modelling will know that this is all the evidence I need to produce a model and it proved to be more straightforward that one might think.
     
    After the opening of the London & Birmingham Railway, the board were left with a significant number of open carriages used initially to show-off the line but really only suitable for a third-class fare. Given that they had no intention of carrying third-class passengers something useful had to be done with them. Thankfully, they were sturdy enough to be converted into covered second-class carriages with the addition of brakes, full height ends and roofs whilst others formed the basis for entirely enclosed carriages. Our curious carriage would appear to be a half-way house for the daredevil traveller. In my quest for a good variety of London & Birmingham carriages I had already produced a cast white metal ‘kit’ for the open carriage based on drawings published by Samuel Brees in his ‘Railway Practice’ of 1842.
     

    Fig.2. The raw castings for the London & Birmingham open third awaiting cleaning and assembly.
     
    The basic carriage was put together in the usual way, soldered construction with etched details and a set of resin cast seats which simply slot in place. Once completed, the carriage was thoroughly cleaned and given a coat of primer. The end extensions were then fabricated from styrene sheet and strip, and carefully glued in place. I decided that Bury’s suggestion that the two passengers were standing at the height of the seat back must be slightly incorrect. To do this would have required a substantial shelf at this height which would then prevent anyone from actually sitting on the end seats (unless the shelf folded up) and in fact standing on the seat itself would be sufficient to see over the carriage end and satisfy any burning desire to have one’s top hat blown off. 
     

    Fig.3. The assembled carriage in black undercoat with the end extensions made from black styrene.
     
    The building of this curiosity took a few evenings work but the novelty of the finished carriage together with the point that it brings to life an otherwise forgotten or even unbelievable detail from the early days of railway travel was well worth it. As always, I am very grateful to Tom Nicholls for finding this little gem of information in the archives and providing the excuse I needed.
     

    Figs.4 The completed and painted carriage just requiring a couple of standing passengers with a ‘Devil-may-care’ attitude towards personal safety.
     

     

     

     
     
  2. 5&9Models

    Bury Goods 0-4-0
    It occurred to me yesterday that it had been a while since I visited RMWeb, "Oh, it must be a few weeks now..." I said to myself. However, logging on to view the fascinating, entertaining and sometimes stunningly inspirational projects on show I was utterly shocked to discover that it's been many months and that my last blog entry was before Christmas last year! What the heck have I been doing?
     
    Thankfully the answer is quite a lot really and therefore an update on the Bury 0-4-0 is a good place to start. As I may have mentioned before the Bury goods is one of many 'components' that will make up a small exhibition layout of London & Birmingham Railway Coventry station set in 1839. My good friend Tom Nicholls has been hard at work researching until his fingers are numb, and building a website https://coventry1839.org to explain the history of Coventry station thereby creating an opportunity for me to describe all the modelling involved. In fact, that's where all my blogs have been disappearing to so please do visit and catch up on progress.
     
    In the meantime the Bury goods has received its coat of green which has made a big difference. 
     

    The wires poking out the front were to test the motor and gearbox in situ with everything in place and thankfully it runs very sweetly,
     

    However, once I connected the finer wires from the pick ups and separate ones from the motor (it will be DCC) it still ran smoothly enough except for an irritating wobble on the left front wheel. I've traced this to a slightly skewed fit of the nylon bush between the hub and the axle.
     

    Fixing the wobble will require the whole thing to be dismantled which is not as bad as it sounds as it's designed to be taken to bits if required, and re-set the wheel straight. I might check the distance between crankpins again just to be sure there's nothing weird going on there too.
     

    The loco is really small in 4mm scale but weighs in at 95g thanks to stuffing every last gap with tungsten putty which I find a very useful way of adding necessary tractive weight in such tiny locos. No.79's job at Coventry will be to run from one end to the other pulling half a dozen or so small wagons which it should manage quite easily. I have since painted a driver and fireman who will find a semi-permanent home on the footpath once the tender is coupled and the DCC chip plugged in.
     
     
     
  3. 5&9Models

    Bury Goods 0-4-0
    For some time now I have been working on a 0-4-0 Bury goods locomotive in 4mm scale for my EM gauge London & Birmingham Railway project. 


     
    Today I managed to apply the black undercoat and try a loose assembly. Although these engines were green (like the wheels) I have to admit it looks quite fetching in black.
     

     
    The model is built entirely from scratch, powered by a Portescap motor inside the boiler through a scratch built gearbox. The wheels are cast from 3D printed masters and the round bits lathe turned from brass and copper. It will at some point be joined by a couple of 2-2-0 passenger engines. There is still much to be done, and the tender is almost complete too but progress is very slow so the next update might be a while yet. Given that it’s only the size of my thumb it’s mighty fiddly!
     

     
    Happy Christmas!
  4. 5&9Models

    Early Carriage Truck
    No drawings survive for these late 1830s carriage trucks but they frequently appear in contemporary illustrations and there are written accounts describing them together with references in company minute books. This one conforms to the dimensions given by Wishaw of a Grand Junction Railway carriage truck c.1837.
     
    ‘The carriage trucks are each 13 feet 8 inches long, 7 feet 1-1/2 inches wide, and the sides 1-1/2 inches high; the weight being about 43 cwt., and the price £130.’
     

     
    I should add that this is my interpretation of the scant historical information relating to these vehicles. That they existed is not in doubt, dimensions given by contemporary authors are as accurate as we’ll ever get. Such trucks were probably on their last legs by the time the LNWR was formed but some may have survived for a few more years. The London & Birmingham Railway board minutes record that the carriage committee should,

    ‘…consider the possibility of reducing the enormous weight of those in use on the Grand Junction Railway…’ 

    and Brees provided a drawing of a L&B’ham carriage truck of somewhat smaller and lighter dimensions, perhaps a direct result of this consideration.
     

     
    The truck and carriage, a ‘travelling chariot’ are 4mm scale, built entirely from scratch using a combination of brass fret off-cuts from the scrap box and my own whitemetal castings. I would also like to thank Tom Nicholls for sharing the results of his diligent research into such early vehicles.
     

     
    The truck itself is based on the ‘chassis’ of a London & Birmingham Night Second carriage (the subject of another kit and possible future post) which matches the dimensions given in Wishaw.


     
    The travelling chariot is based on photos and a few measurements of the real thing. 
     

     
    Thankfully such horse drawn carriages seem to have had a better survival rate owing to the fact that they can be stashed away in the corner of a barn unlike railway trucks…!
     

     
    The truck on the left is the London & Birmingham version illustrated in Brees. It’s smaller but fairly sturdy and I can’t imagine it was that much lighter really.
  5. 5&9Models

    Bury Goods 0-4-0
    A little progress today, trying to keep out of the heat! Having now milled out the copper firebox to make space for the gearbox, at least nearly, (I still need to take a bit more out before it fits properly), I cut and soldered in place the boiler bands. These were cut from thin brass sheet, bent to shape and tacked in place. 


     
    The little turned brass lock-up safety valve cover was then soldered on after drilling an appropriate hole towards the front of the boiler. These little covered valves supplemented the spring balance on the firebox and provided a back up should the driver be tempted to screw down the spring balance to prevent any irritating hissing!



    A recent commission was a set of etched brass number plates. I had a set made for this (79) and also some made for the passenger versions to come.
     

     
    With the numbers in place and a trial fit of the chimney (which is too tall at the moment) it’s actually beginning to look like an engine.
  6. 5&9Models

    Bury Goods 0-4-0
    A two week break has given me time to ponder a couple of tricky areas regarding the Bury goods and this weekend has seen some progress, the most obvious being the smokebox and boiler.
     
    I toyed with the idea of producing the smokebox as one cast lump to provide a bit of tractive weight and to balance the weight of the turned copper firebox. However, since this is a one-off scratch build I felt that might be a waste of mould space and also I was too impatient to go through that process when I only need one.
     
    Therefore, I cut a front from 12thou brass sheet and then soldered one length around it from one flat side, around the circular top half and down the other side. This was then laminated with a sheet of thin brass foil with rivet detail pushed out from behind. To do this I use a natty little homemade tool made from an old plastic scalpel handle and a cog from an old mantle clock. This cog was clamped in a nut and bolt through the centre, secured in the lathe (a drill chuck will do), and sharpened with a file. Once fitted to the handle in makes a sort of pin roller. Run along a straight edge it’s ideal for creating long lines of evenly spaced rivets in styrene or thin brass foil.



    Once this laminate was soldered in place I formed the distinctive Bury smokebox door surround (which were originally polished brass) and a couple of brass washers were conveniently exactly the right size for the cylinder covers so they got soldered on as well.



    The boiler with its lagging strips was rolled from flat sheet first scored with lots of evenly spaced lines to represent the gaps between the strips. It was a bit of a pain keeping this round as I rolled it as it kept wanting to kink along the scored lines but we got there in the end.



    A quick test assembly and photo before calling it a day.
  7. 5&9Models

    Bury Goods 0-4-0
    Having tackled the frames and being happy with those, I turned my attention to the guts that are hopefully going to make this wee beestie move. A rummage through the ‘tray of delights’ resulted in a selection of gears as follows: one 38:1 worm and pinion (Ultrascale), one 10t spur and two 20t spurs (Branchlines). The first of these is just an idler, the second will be the fixed drive gear on the axle.


     
    Today’s job was to drill and cut two gearbox sides ensuring everything was in the right place and meshing perfectly. Sounds like a nightmare but I actually enjoy scratch building gearboxes oddball that I am!
     
    The other task this week was to form some copper tubing into something representing a round top firebox so distinctive of these Bury engines. I turned a dome on the end of a length of brass rod to use as a former, heated the copper tube and gently beat it over gradually forming the dome, albeit with a hole in the top which would br covered by the brass safety valve bonnet. 


     
    All went well until I put it back in the lathe to clean it up. One tiny snag and in a split second the hand crafted copper dome was chewed up now resembling a piece of shrapnel. Disappointing to say the least. A second one was started, went well and then exactly the same thing happened. After the third time I gave up.


     
    Thankfully, I had some copper rod in stock and was able to turn a solid firebox that now needs boring out hollow to accommodate the gearbox. A few other brass fittings were turned up including a small batch of the tiny lock-up safety valves, one for this loco and a couple for passenger versions in the future.
     

  8. 5&9Models

    Bury Goods 0-4-0
    This scratch build is something I have been wanting to do for years but have never quite plucked up the courage.
     
    There are several 'sticking points' in modelling a bar framed Bury loco, the obvious one being the distinctive wheels. All Bury locos had them so unless you get those right you might as well not bother with the rest. Thankfully, a friend very kindly drew some up and 3D printed the centres to be fitted into Gibson tyres of the appropriate diameter. However, I found the prints to be exquisitely detailed but not very strong. So I decided the best way forward was to use one of the prints as a master and cast a set in white metal. These came out well and are considerably stronger than the prints. The down side is that they are conductive so once cleaned up on the lathe and fitted with tyres, the centres had to be bored out and a tiny plastic sleeve forced in before being bored out again and secured to the axle.
     
    I first made a master for the bar frames out of styrene to use as a master for casting them in white metal but decided that the castings would not be robust enough so instead some brass bar was used to fabricate the frames. They're now plenty strong enough for the job as I made them slightly chunkier than the originals for peace of mind. Springs were made from some very useful etches, bearings added and a buffer beam built up from nickel silver and brass. 
     
    The buffer beam was soldered in position but a trial fit of the wheels revealed that the buffer centre height was too low by just over 1mm. Rather than unsolder and move the buffer beam higher which would look daft, I decided to unsolder the bearings and fit them lower down in the frames. This sounded like a horrible job, unsoldering the bearings whilst not accidentally disturbing any other soldered joints. However, it went well and before refitting the bearings I cut and fitted the footplate to ensure everything was square and spaced properly. This actually made it easier to get the bearing in exactly the right place. Lesson learned for when I tackle the Bury passenger 2-2-0 later on.
     
    The photo shows progress so far. The next job will be to scratch build the gearbox and ensure the motor sits at the right level so it can hide inside the boiler. Something tells me that this won't be particularly straightforward but I feel up for the challenge. Wish me luck...!
     


  9. 5&9Models

    Bricklayers Arms c1845
    All this replacement of lost images on previous blogs has made me think about gathering some favourite images from my layout project and dumping them in one blog entry, so here it is. A hotch-potch of photos from around the first baseboard which is almost complete.
     
    The layout is 4mm scale and track work EM gauge. I initially set it in 1844 when Bricklayers Arms was completed and opened to the public. However, it has now turned into 1845 as this allows for a little weathering and I don't have to leave everything looking too new.
     
    Apologies to those who have seen it all before but I thought a summary was due before moving on to the next baseboard which will be the massive goods shed and lots of wagon turntables, (I'm not sure I'm looking forward to that bit)!
     
    Thanks for looking.
     

     
    The backs of the houses at Greyhound Place
     

     
    The stables at the back of the cattle yard.
     

     
    The Rat catcher.
     

     
    The Tannery.
     

     
    A dispute over the chaff-cutting.
     

     
    Preparing to lime wash a new cattle wagon.
     

     
    Delivery of a prize bull.
     

     
    Mr Rolls is late for work.
     
     
  10. 5&9Models

    Image restoration and a teaser...
    Not realising that restoring the images to some of my blog entries would also shunt them to the front of the queue, I thought I'd best add something new to redress the balance.
     
    Having sat to one side for some time patiently waiting for me to get 'other stuff' out of the way, my William Bridges Adams light locomotive has been lifted out of the box and steered towards a state of completion. At least the locomotive is almost there notwithstanding a few finishing jobs. It still lacks the composite tender brake carriage to which it was close coupled and I have yet to even start this, but it has to be said, completing the loco is spurring me on to get it done. The original was built by Adams at his Fairfield Works in Bow in 1849 for the Londonderry & Enniskillen Railway in Ireland. a couple of others to this pattern were constructed but Adams went bust in 1850 so the design was picked up by Stephensons who proceeded to construct further examples with the addition of a footplate, larger cylinders, better valve gear and other improvements. I suppose you could say this model represents the design in its Mk 1 condition.
     

     
    The loco is built entirely from scratch, 4mm scale EM gauge. A tiny open frame motor (possibly from a Tenshodo motor bogie) sits in the well tank under the boiler and power is transferred back to the driving wheels using a couple of nylon spur gears from the odds box to a 38:1 Branchlines worm and pinion combo. Heaven only knows what the reduction ration is a I haven't bothered counting the teeth on the two spurs but it runs very sweetly at a realistic speed so that's good enough for me.
     
     
  11. 5&9Models

    Rennie Loco scratch builds
    Well, having restored the lost images to my blog about the Rennie loco project I now realise that I've done more than I thought and this deserves an update.
     

     
    Croydon is now complete although the above image shows that there are a few final jobs to do before it can enter traffic. There is a large black scar behind the drivers on both sides where i removed too much of the boiler/firebox to allow room for the driving wheels. This has now been filled, smoothed and painted to blend in. A couple of details have been completed on the tender too and it now runs very sweetly so I'm happy to call it a day on this one.
     

     
    The view from an 1840s drone (hot air balloon)!
     

     
    Satellite in OO has also been completed and is now with its new owner in London (where it belongs...?!).
     

     
    Interestingly, the compromises made to squeeze the boiler in between the OO gauge drivers don't seem to be too apparent once the splashers are in place. By request I didn't add the crew to this one but a driver and fireman have been supplied and can always be tacked in place for exhibition use. The sight of it trundling along without crew could be unsettling for those of a nervous disposition! 
     
    I still have two more to build, my own Satellite in EM and Kentish Man which was similar but not quite the same. Worth doing....I think....!
  12. 5&9Models

    The Rennie project, further progress.
    Visually speaking, work appears to have slowed up on my Rennie loco project. I have reached the stage where all the fiddly little detailing jobs need to be done and this takes time without much obvious progress. The current pair approaching completion are Satellite of the London & Brighton Railway, and Croydon of the London & Croydon Railway.
     
    However, the list is reducing as each detail is ticked off and at present I'm awaiting some etches for the reversers. This is unusual for me as I like to build absolutely everything from scratch but I will need at least four reversers of two different types and more in the future. So an opportunity was taken to squeeze some on to the fret for an 1849 SER composite carriage kindly drawn up for me by a fellow Brighton Circle member (more of which anon), so once this arrives I will be able to complete the build and prepare them for painting, as well as make a couple of the composite carriages which I'm quite excited about too.
     

     
    I took the opportunity to compare Croydon with Plumpton, a Stroudley single of the 1880s and my first proper scratch build completed many years ago (and looking a bit rough). The G class singles were not big engines but it's surprising how it almost towers over Croydon. The back-to-back image shows the difference very well.
     
     

     
    Bearing in mind that Croydon is in the foreground in the image below, it's still very small compared with the G class behind. The difference is size gives an impression of how locomotive technology and of course power increased dramatically over the ensuing 40 years. Stroudley's inside frame tender was twice the size! It would be fascinating to compare Croydon with a small tank engine like a Terrier or even a much larger 20th century locomotive. I suspect the pulling power of the finished model will be fairly small as well, hence my plan for etched coaches!
     
     

     
    Thanks for looking, more soon...!
     
  13. 5&9Models

    Draisienne in 4mm
    Having recently acquired a discarded dandy horse from a house clearance off the Old Kent Road, Jean Floret de Cauliflower is quite the man about town. At least, his own frisky imagination tells him so. 
     

     
    However, this past week he has consistently upset every innocent pedestrian and skittish filly in Bermondsey.
     

     
    Perhaps it is just as well that his wreckless behaviour may soon be brought to a dramatic finale. The work of our tiny but destructive foe Anobium Punctatum - the common furniture beetle - has gone entirely unnoticed by Jean. The relentless efforts of this miniature pest will surely result in his wooden steed disintegrating in a most undignified manner forcing a swift conclusion to his irksome escapades.
     

     
    Rider and Draisienne made from scratch in 4mm scale over three evenings this week
     
  14. 5&9Models
    Following a great little video recently produced by Anthony Dawson about the locomotive Jenny Lind of the London, Brighton & South Coast Railway, I felt inspired to give my own 4mm scale model a little break from the monotony of the display cabinet.
     
    The original locomotive was the first of a batch designed by David Joy and built by E.B.Wilson of Leeds. Delivered in 1847, it was a very successful class of locomotives which owed much to the  design of John Gray who had been Locomotive Superintendent of the LB&SCR. His express engine bears a strong resemblance to Joy's creation but his were built by Hackworth's and construction was so painfully slow that they were still being delivered after the better Jenny Lind class were entering service.
     

     
    I built it many ago from a set of castings loosely resembling a kit. Not an easy build and I ended up motorising the tender using a small transverse motor from an old defunct Apple computer. It works ok but isn't a very helpful example for others to follow and certainly not the sort of thing that's ideal to include in the 'kit'!
     

     
    At some point I should perhaps add some crew but for the purposes of explaining these photos, they have clearly gone off to the pub for swift porter before anyone notices they've gone...
     
     

    Note the similarity between Gray's design and the subsequent Jenny Lind's in the drawing below. The odd looking box in front of the driving wheel is the boiler feed pump. A much better drawing of Gray's engine exists but I am waiting for my copy to arrive soon so this one will have to do for now. Plans are afoot to model this one too.
     

     
    I hope the inclusion of the video link is within RMWeb rules, if not please accept my apologies and delete it. I had no part in the making of the video but I have to say the live steam model (not mine) in the video is really something special. I hope you enjoy it.
     
     
  15. 5&9Models

    London & Birmingham Carriages
    Another of my 'seemed like a good idea at the time' projects last summer was to create kits for each of the principal carriages of the London & Birmingham Railway.
     
    Once again this was to be another diversion from Bricklayers Arms but a change is as good as a break, no?
     

     
    Together with a good friend Tom Nicholls who has provided endless information, drawings, research and above all encouragement, I started at the bottom with the intention of working my way up. In other words, the first was the open third class carriage (if you can call it a carriage at all) and the open-sided second. These have been created as fairly straightforward cast kits with one resin-cast block for the seats. This turned out to be quite a good idea as making seats in styrene is very boring indeed.
     

     
    The sole bars, axle guards and springs are all part of the side so the carriage went together quite quickly. The buffers were turned in brass and set in a mould to produce a quantity of castings suitable for both types of carriage.
     

     
    I haven't bothered with any form of compensation with these as they really are so small it hardly seems worth the effort. In fact they are that small one would fit neatly inside your average 10ton coal wagon (yes, I tried it)!
     

     
    The open-sided second required a little more work in that I made little turned pillars to support the roof which was made of brass sheet gently curved to the correct profile. These carriages also had brakes, the brakesman sitting amongst the passengers and hopefully not being too distracted from his job by the odd glimpse of a ladies ankle. The handle is operated through a hole in the end panelling which presumably gave the brakesman a view forward or back as required, although a roof top seat like the braked First class carriages would have been much more useful in that respect.
     

     
    The enclosed Night Second is a work in progress and artwork is currently being drawn up by a fellow Brighton Circle member to produce the two types of First class as etched kits. More about these in a future blog when I finally stop fussing over the detail and agree to send the artwork to the etchers!
  16. 5&9Models

    G & J Rennie locos
    Last year I embarked on an ambitious project to scratch build no less than four locomotives by Messrs Rennie of Blackfriars, London. 
     
    In 1838/39 the brothers constructed five engines for the London & Southampton Rly., and two for the London & Croydon Rly. It is clear from studying the drawing published by Brees in his 'Railway Practice' that the design was a combination of Stephenson's Patentee and the popular and sturdy 2-2-2 by Sharp & Co of Manchester. However, having no previous experience in the field, the minute books at Kew tell us that all seven engines were miserable performers constantly requiring attention to keep them in service. Two further examples of this type were built for the London & Brighton and two more were built and exported to Germany.
     
    Despite a growing reputation for shoddy workmanship, in 1841 Daniel Gooch commissioned Rennies to build two engines of the Fire Fly class for the broad gauge GWR. Gooch supplied patterns and templates to ensure the engines were built exactly as he intended and since the Fire Fly's were a modification of Stephenson's superb Star Class, these two engines named Mazeppa and Arab were excellent. At the time they entered traffic they were the most powerful of their class having slightly larger cylinders than their stablemates.
     
    The result of this order was that Messrs Rennie now had experience of building a 'proper' locomotive and based on this they then built three further engines, Satellite in late 1841 for the London & Brighton Rly, and Man of Kent and Kentish Man for the Joint Committee of the L&CR and the SER in 1842/43. Contemporary reports tell us that all three were a roaring success. As a representation of Rennie's locomotives I chose to model Croydon, Satellite and Kentish Man (the fourth being a duplicate Satellite in 00 for a friend).
     

     
    To save making frame sides again and again I decided to make one master for each side of the sandwich frame, set them in a mould and cast them, then assemble each side frame as a proper sandwich. This saved a lot of time especially with duplicating Satellite. The buffer beams are universal so they were also made as castings as were a number of other parts required in number.
     
     
     
    The tender was also made in this way and treated as a 'kit', after all I need four of them. The idea is that a simple motor bogie unit will go in each tender and this universal power unit will be easily produced for each loco.
     

     
    Croydon is taking shape. I made masters for the boiler, firebox and smokebox for all the locos and cast them from resin to reduce weight. Having moulds for each of these units makes them interchangeable and potentially useful for future projects too. Creating Croydon's distinctive octagonal dome was fun...!
     

     
    Satellite is just balanced in its wheels for this trial fitting. This one is in 00 so quite a bit of material had to be shaved out of the boiler, firebox and smokebox in order to fit the wheels in what is realistically the wrong place! The splashers will remain polished brass and should look quite grand in the end.
     
  17. 5&9Models
    Well it's not every day you have the excuse to use the word triumvirate but today I'm feeling lucky!
     
    These three are a bit late for my own layout, but never too late for the glass cabinet screwed to my living room wall. The Beadle wagon is a recent addition to the range, crisp masters by Simon Turner, lettering transfers by POW sides.
     
    The Lime wagon and Booth Bros. wagons are revivals of excellent Woodham Wagon Works kits, masters by Burgundy many moons ago, but I made a new mould for the Lime Wagon and intend doing the same for the Booth Bros. at some point in the not too distant future. Lettering by my own fists of ham.
     



  18. 5&9Models

    GER wagons
    Although somewhat irrelevant to my overall project south of Old Father Thames, I confess I've always rather fancied the look of these sturdy GER open wagons.
     
    So it's been a pleasure to revive these two ex-Woodham Wagon Works kits of both 1870 and 1883 versions. I managed to complete the 1870 one which is my personal preference but then struggled to find a period photo of the 1883 edition which is why it is as yet unlettered or numbered. I also fouled up a bit with this one by setting the solebars too far apart and causing all sorts of difficulties fitting the springs, doh! I think this is one for the 'You get the general idea anyway' shelf! 
     
    It was only when I came to photograph them I realised (when they fell between the rails) that I'd fitted them with 00 wheels...what is wrong with me?! Note to self: do try to pay more attention in future!
     

     
    The 1870 version.
     

     
    The 1870 version...again!
     

     
    The 1883 version (work in progress).
     
  19. 5&9Models

    Bricklayers Arms c1845
    Jonathan enjoys his job at Bricklayers Arms. Usually he is gainfully employed tending to the bovine guests arriving at the cattle yard. He couldn't say for sure what happens to them once they leave the yard, but given the profusion of tanneries in he area we can be fairly certain it is a one way trip. He makes their lives as comfortable as he can whilst they are in his charge.
     

     
    Occasionally there are sheep to manage but these are less rewarding owing to their irksome tendency to bolt. However, today does not look like it is going to be so enjoyable.
     

     
    He has been given the task of whitewashing the new cattle wagons arriving this morning, they are larger than the previous wagons. He thinks this is a direct result of two beasts jumping out on their journey through north Kent and being, as reported in the Illustrated London News, 'dashed to atoms' by a train passing in the opposite direction.
     

     
    The whitewash will no doubt end up on his clothes, his shoes, and on his hands and face. Jonathan is diligent but clumsy and we think he may need to move his tub much closer to the wagon!
     

     
    It was fun to build the SER cattle wagon with doors open for a change, something you don't often see. But perhaps I need to get out more...
     
  20. 5&9Models

    Bricklayers Arms c.1845
    Ex petty officer Solly is in a bit of a pickle. 

    Having recently been suspended from active naval service owing to a regrettable incident with a cannon, he has decided to consume an increasing quantity of London’s best porter.

    Unfortunately, not only did the calamity result in the loss of his right leg below the knee, it also neatly removed his left thumb. He now has to swap his crutch to the left in order to hold a bottle in his right hand. After several bottles this balancing act can prove increasingly challenging.
     


    Meanwhile, Archibald Plummer calmly makes his way past the undignified display. He’s seen it all before and he knows it rarely ends well.
     

     
    A cab clatters past the houses at Greyhound Place. Inside, William Rolls peruses the morning papers on the way to his floor cloth manufactory.
     


    In January 1837, James Braby a coach builder of Duke Street, Lambeth was granted patent no.7279 to cover ‘Certain Improvements in the Construction of Carriages’. His patent was well illustrated with drawings of three designs for hackney carriages and one omnibus. The first, a one horse hackney carriage is the subject of my model. It's cast in white metal as a ‘kit’ and the driver, a heavily modified ModelU character. The horse was a spare from the scrap box.
     


    Whether James Braby actually built any of these carriages is unknown. Unlike many inventors he was at least in a position to manufacture his designs, even if only in model form to promote his ideas to prospective clients.

    Figures are ModelU’s finest (with minor and occasionally major modifications). The layout is my ongoing project to recreate Bricklayers Arms, Bermondsey, c.1845 in 4mm scale. Apologies for the low resolution of these images, I must buy a new camera!


  21. 5&9Models

    Activity in the cattle yard
    Thankfully, in my case at least, lack of blog updates has not meant lack of activity. The past few months has seen slow but steady progress towards completing the cattle yard at Bricklayers Arms c1845 and therefore entering the final straight in terms of completing the first baseboard of this four baseboard exhibition layout.
     
    The following pictures are a collection of various cameos and scenes which hopefully go some way to telling the story of a busy (ish) mid 19th century yard in 4mm scale.
     

     
    The first scene shows a couple of chaps having some difficulty with a new chaff cutter. Chaff, or chopped hay/straw was an essential part of a horses diet. This particular model was Ward & Colbourne's Patent Chaff Cutting Engine, new in 1844. I scratch built it using brass scraps, following a drawing on the cover of Mechanics Magazine August 4th 1844. It's unusual in that it is a guillotine cutter and probably quite dangerous too! I modelled it so that it works. As you turn the handle the tiny crank turns and the blade goes up and down. Utterly pointless I know but fun all the same.
     

     
    The figures are modified ModelU 3D prints. I've fettled the clothing and hats a bit to take them back to mid-19th century labourers.
     

     
    Farmer Thompson is pleased to finally arrive at the cattle yard having driven his prize bull all the way from his farm just south of Peckham Rye. He got a good price for it so once it's on its way to Kent he'll reward himself with a pint in the Greyhound before heading back.
     

     
    The bull started life as a large white metal cow from the Dart Castings range. I cut the udders off, added some 'cahunas' and horns and beefed it up a bit with some judicious soldering before filing to shape.
     

     
    The characters are more modified ModelU figures.
     

     
    Of course a cattle yard would not be complete without a cattle wagon. This one is from my own range of kits, an early open South Eastern Railway type. Strictly speaking it's about 5-6 years too modern for the period I'm modelling but it's as near as I can get to an authentic vehicle.
     

     
    The characters hand-shunting are in fact me. I was lucky enough to be scanned by Alan Buttler from ModelU at the Severn Valley Railway a few weeks ago. He's done a fabulous job tidying up the scans and printing these out, and for once I haven't felt the need to modify them!
     

     
    It amazes me that even details such as individual fingers are reproduced. The only concern is the the painting does them justice, especially in 4mm scale.
     

     
    At the end of a busy day, Abraham is exhausted. He's diligently swept and shovelled to keep the cattle docks clean and is ready to go home to tea.
     

     

     
     

  22. 5&9Models

    LSWR and LCDR goods stock
    Not that these two will ever run at Bricklayers Arms but by request I dug out the old Woodham Wagon Works masters for a LSWR open wagon and made a new mould to produce the kit again. It went together very well and makes a lovely sturdy wagon. Not convinced about my choice of dark brown but I don't think the lighting helped. I'm in the process of reviving two GER open wagon kits as well, 1870 and 1883 versions, but more of that later. The LCDR van or 'covered goods wagon' to give it its proper title is from masters made by the skilled hand of Simon Turner. It went together very well as his masters always do and looks reasonably at home although both vehicles are somewhat 'modern image' for my tastes.
     
    I had an absolute nightmare when it came to painting this pair. Like a fool I decided to spray the etch primer when the weather was really cold back in April. The tiny particles of spray left the can, solidified, then deposited themselves like fine sand all over the kits. Both were shoved to the back of the cupboard in disappointment for a couple of months. i finally plucked up the courage to have a go at sanding down the LCDR van which resulted in a slightly better finish but I didn't bother with the LSWR wagon as you can see from the photos. It's particularly noticeable around the detailed areas like buffers etc as these are almost impossible to sand down due to the high risk of removing the detail altogether. I decided to hand letter them as well, I doubt transfers would take too well to a surface resembling course sandpaper. Hey-ho! Won't do that again...!
     
    Plenty more old masters to dig out and revive (eternal thanks to Burgundy for this) but it's a long slow process and a bit pricey if you consider the cost of the mould rubber these days. However, it keeps me busy and I suppose we should all have at least a few models that 'look ok from a distance'!
     
     
     


  23. 5&9Models

    Bricklayers Arms progress
    Well, not being a massive footie fan I decided to amuse myself yesterday evening fitting the cattle yard office and back wall to the baseboard in front of the stables. This has created a more Dickensian alley feel to the forecourt which is what I had hoped would happen. There is still much to do in terms of fitting the cattle docks, weathering the surfaces, adding muck and the assorted figures and of course, cattle.
     
    There are a few final touches, the steps to the office are too clean and there needs to be a bit of blending between the muck and the setts, perhaps the odd shovel or broom etc, but I couldn't resist a quick photo to mark the occasion.
     
    The headline image gives a pigeon's eye view and the somewhat 'too clean' cattle yard can be seen at the top.
     


  24. 5&9Models

    Adams Light Locomotive in 4mm scale
    In the latter half of the 1840s, William Bridges Adams began to dabble in locomotive design with the help of several key figures, particularly the resident engineer of the Eastern Counties Railway, James Samuel. He had established a works at Fair Field, Bow in 1843 for the purposes of expanding his business building carriages and wagons for both rail and road and locomotive construction was a natural progression.
     
    Together they developed the principle of the light locomotive which was proffered as an alternative to the ever increasing weight and power of railway locomotives in general, particularly with the gauge wars and stiff competition between the mighty broad gauge with it's powerful Gooch designed passenger engines and the ultimate symbol of power and speed on Stephenson's gauge, Thomas Russell Crampton's mighty 'Liverpool'. 
     
    Adams argued that the wear and tear on the permanent way was unacceptable, it being barely able to keep pace with locomotive and rolling stock development. The huge volume of dead weight hauled around by large engines meant that much of the time, particularly on branch lines, the arrangement was highly uneconomical. Adams offered an alternative in his lightweight locomotive and carriage, either as a fixed vehicle with engine and carriage on one frame like 'Fair Field' for the broad gauge and 'Enfield' for the Eastern Counties, or a paired light engine and tender carriage. His vision and that of James Samuel was for frequent light 'shuttle' services and it could be said that considering the make-up of todays trains on lesser lines, he was way ahead of his time. This locomotive and its tender/carriage was first illustrated in Adams' 1850 publication 'Road Progress' as a fold out plate. Essentially the same design appeared in one of his many (32) patents, No.13653 of 1851 and the culmination of this design was Ariel's Girdle displayed at the Great Exhibition in the same year, although this was made by Kitson, Thompson & Hewitson of Leeds since Adams was bankrupt by the summer of 1850 and the Fair Field Works sold off. The design concept was sufficiently noteworthy for Zerah Colburn to illustrate it in his 'Locomotive Engineering and the Mechanism of Railways' in 1871, although the tender carriage in Colburn's drawing is considerably shorter than the original and looks decidedly odd. Stephenson's continued this basic design and one of their versions was illustrated by Daniel Kinnear Clarke in his book 'Railway Machinery'. It is more sophisticated machine and makes for an interesting comparison.
     

    This drawing is reproduced courtesy of the National Archives.
     
    My fascination for the life and work of William Bridges Adams is well established and aside from writing his biography (an ongoing long term project requiring an immense amount of research not helped by Coronavirus lockdown restrictions), I have an ambition to model at least a good representative selection of his various creations. The 4mm scale model described here is the first of my efforts towards modelling his locomotives. During 2020, the Bodmer single occasionally drove me mad so I felt it was important to have a side project to restore the equilibrium, a sort of yin and yang approach. I would not normally have two loco projects on the go simultaneously in the fear than neither of them would get finished however, in this case it proved a blessing. The following photographs show its current state with much still to do including the tender/carriage.
     
    I have to say I find it one of the most attractive (dare I say sexy?!) little engines I have ever seen. Further pictures will be posted with some constructional details in due course.
     

     
    The wheels are only just on (I don't like to force them home until I'm ready to fit them for the final time) and the splashers balanced in place. The footplate side sheets are made but not yet fitted. Cylinders and motion remain to be finished and may well be fitted after painting. They are very delicate and if I gum them up with paint (schoolboy error) I will not forgive myself! There is a little more plumbing to be done such as the steam pipes from the dome and the injectors but it is almost there.
     

     
    The drop in the buffer beam allowed the smokebox door room to open since the boiler was fairly low slung. Adams was a great believer in keeping the centre of gravity as low as possible,  a popular theory of the time. The idea was that it made for steadier and safer running but this was not quite the case. The footplate was no wider than the outside edge of the splashers and therefore quite narrow. Later versions including those made by Stephenson who continued the design were wider.
     

     
    The coupling to the tender/carriage can be seen and th two brass pipes are the feed from the water tank, a long wide shallow container which sat under the tender/carriage. Apparently water from the well tank under the boiler was circulated back through this tank to keep the passengers warm in cold weather. Clever!
     
  25. 5&9Models
    I've finally completed my scratch built Bodmer single no.124 of the London & Brighton Railway. It's taken a year of blood sweat and tears, trying to be too clever and paying the price!
     
    Details of the project have been promised to the HMRS in the form of an article for their Journal, so rather than spoil that I'll just deposit a couple of images here in the meantime.
     
    Further details of this project can be found on a previous blog entry entitled 'Build a Bodmer Competition - not!', or a more comprehensive write up should be in the next HMRS Journal out this summer.
     

     

     

×
×
  • Create New...