5BarVT

And to which service do you propose to allocate this loco? Paul.

It was an Irn Bru advert mounted on the wall of (I think) Caledonian Chambers (part of Central Station) facing up Renfield St. in my time, it was a large clock with blue hands and orange numerals (and some Irn Bru advertising). Very useful if you were running down Renfield St a bit tight for a train! Internet searches reveal previous incarnations of the advert, but I haven’t found one of the clock. After privatisation it was taken down, because (allegedly) no-one knew who could authorise it to remain. (I suspect the wall was ScotRail in Caley Chambers and the roof beneath it was whoever owned Central Hotel.). Strangely, it seemed no bother to find out the ownership to effect a new electronic advertising sign in its place . . . Paul.

Not the right station for the Irn Bru clock (mores the pity!!). Paul.

Nicely done. I rather like it. Paul.

Thank you - should have gone to . . . Now I look properly I can see that the shield is fixed to the post not the arm. I wonder if it’s the same Annett as in GF release instruments. Yes, a plate in place of the green glass. Paul.

I’ve just lost half an hour of my life. And really enjoyed it! Paul.

Usually in conjunction with a colour light head for Y (YY) G at the fringes of a colourlight area. The Southern were particularly fond of that fringing arrangement. Perhaps that part is yet to come. Paul. See below for correct explanation!

Agreed. Paul.

Potentially try a topic in the DCC Help forum to see if anyone else has solved the problem, or can at least advise on output pins. Paul. Just seen that you have already asked on the 18100 topic.

Have you another (make) of decoder to try? Would confirm its decoder not loco, though working on DC is reasonably conclusive. Or, paracetamol, hot damp towel and the ESU manual . . . Never used ESU, but some of my modelling colleagues swear by them. Manual is indeed comprehensive (read incomprehensible). Do you know which outputs drive which lamps (as a start to whether function mapping is the issue). Paul.

Do you need that many volts for O gauge? :-) Paul.

That’s a fine piece of instrumentation on the O gauge shelf. Paul.

If you have the extra sidings within the reversing section, you need to make sure that you never (even inadvertently) have a train coming into the section from both ends at the same time. (Also applies without points in there but much less likely to happen as it’s “obvious” there is nowhere to go.) If you shorten the section to keep the points out of it then train length becomes an issue. If your only vehicles with power connections to the wheels are locos then you might get away with it, but metal wheels running through joints could still touch both together. If you have coach lighting etc you could end up with the loco at the front bridging one gap and a lighting compatible coach (even if not fitted with lights) bridging the other. My inclination would be to go for the longer section and manage the two trains issue. Paul.

Ahh, memories! I used to cycle old railway lines. Fine when they have a proper surface or in dry weather, but I have had the “all jammed solid under the mudguards” experience. Paul.

Most interesting to see a view showing how close everything was. Many years spent standing on that low level platform at c.17:25 to 17:32 when you could hear the DMU engines on the platforms above so I knew there wasn’t much gap, but nice to see it confirmed photographically. Also a revelation that 6&7 weren’t always as long as 2-5. And following the Queen St upgrade, they are shorter once more as 2-5 have been lengthened by a coach length. Paul.

Fair weather cyclist? Or do you go for the ‘brown line up the back of the jacket’ look? I used to be an any weather cyclist, now I just cart mudguards around as extra weight! Paul.

I see your 4’ road numbers in the FY. Do they act as clearance markers too? Paul.

I observe that rule too, with the exception of the Victoria Line where some of the longer sections are > 2mins. I suspect some of the ‘new’ Jubilee line sections don’t fit either. Paul.

Well that’s a back story. You have the gift of a fertile mind, Sir! Paul.

How about Swansea High Street? Missing the loco spur, 4 platforms not 3 but are just the 3rd split into two, inner xover after the 2-3 split and extra points to the sidings (but they are in the right place for expanded Minories. Pretty much the same operating constraints. Paul. And Helensburgh Central if you strip out the northernmost platform.

Received my MERG Journal last week, noticed a front cover leader to “An Arduino based interlocking signal lever frame’ and thought “I’ll have to read that “. Opened it today and flicked through from back to front (just ‘cos I was holding it in my right hand), missed the locking table on page 9, flicked to pg 6 . . . I recognise that Box diagram! I’m going to have to go back and read it properly now! Paul.

More of a Western fan myself. Can’t have too many of them. Paul.

I think Courour was a bit special. For a start, all water came in by train. But also the working arrangements - there may have been some relief, but I think once there you worked continuously. Paul.

That’s a lot of Warships! Paul.

Like that a lot! Interesting way of placing your WAGO222s. I’ll have to try it. Paul.